Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 91915260 authored by Dave Airlie's avatar Dave Airlie
Browse files

Merge tag 'drm-intel-fixes-2013-11-07' of... 

Merge tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

Bit a bit -fixes pull request in the merge window than usual dua to two
feauture-y things:
- Display CRCs are now enabled on all platforms, including the odd DP case
  on gm45/vlv. Since this is a testing-only feature it should ever hurt,
  but I figured it'll help with regression-testing -fixes. So I left it
  in and didn't postpone it to 3.14.
- Display power well refactoring from Imre. Would have caused major pain
  conflict with the bdw stage 1 patches if I'd postpone this to -next.
  It's only an relatively small interface rework, so shouldn't cause pain.
  It's also been in my tree since almost 3 weeks already.

That accounts for about two thirds of the pull, otherwise just bugfixes:
- vlv backlight fix from Jesse/Jani
- vlv vblank timestamp fix from Jesse
- improved edp detection through vbt from Ville (fixes a vlv issue)
- eDP vdd fix from Paulo
- fixes for dvo lvds on i830M
- a few smaller things all over

Note: This contains a backmerge of v3.12. Since the -internal branch
always applied on top of -nightly I need that unified base to merge bdw
patches. So you'll get a conflict with radeon connector props when pulling
this (and nouveau/master will also conflict a bit when Ben doesn't
rebase). The backmerge itself only had conflicts in drm/i915.

There's also a tiny conflict between Jani's backlight fix and your sysfs
lifetime fix in drm-next.

* tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel: (940 commits)
  drm/i915/vlv: use per-pipe backlight controls v2
  drm/i915: make backlight functions take a connector
  drm/i915: move opregion asle request handling to a work queue
  drm/i915/vlv: use PIPE_START_VBLANK interrupts on VLV
  drm/i915: Make intel_dp_is_edp() less specific
  drm/i915: Give names to the VBT child device type bits
  drm/i915/vlv: enable HDA display audio for Valleyview2
  drm/i915/dvo: call ->mode_set callback only when the port is running
  drm/i915: avoid unclaimed registers when capturing the error state
  drm/i915: Enable DP port CRC for the "auto" source on g4x/vlv
  drm/i915: scramble reset support for DP port CRC on vlv
  drm/i915: scramble reset support for DP port CRC on g4x
  drm/i916: add "auto" pipe CRC source
  ...

Conflicts:
	MAINTAINERS
	drivers/gpu/drm/i915/intel_panel.c
	drivers/gpu/drm/nouveau/core/subdev/mc/base.c
	drivers/gpu/drm/radeon/atombios_encoders.c
	drivers/gpu/drm/radeon/radeon_connectors.c
parents 21136946 07bf139b

Documentation/ABI/stable/sysfs-bus-usb

+4 −4
Original line number Diff line number Diff line
@@ -37,8 +37,8 @@ Description: 
		that the USB device has been connected to the machine.  This

		file is read-only.

Users:

		PowerTOP <power@bughost.org>

		http://www.lesswatts.org/projects/powertop/

		PowerTOP <powertop@lists.01.org>

		https://01.org/powertop/



What:		/sys/bus/usb/device/.../power/active_duration

Date:		January 2008
@@ -57,8 +57,8 @@ Description: 
		will give an integer percentage.  Note that this does not

		account for counter wrap.

Users:

		PowerTOP <power@bughost.org>

		http://www.lesswatts.org/projects/powertop/

		PowerTOP <powertop@lists.01.org>

		https://01.org/powertop/



What:		/sys/bus/usb/devices/<busnum>-<port[.port]>...:<config num>-<interface num>/supports_autosuspend

Date:		January 2008

Documentation/ABI/testing/sysfs-devices-power

+16 −16
Original line number Diff line number Diff line 
What:		/sys/devices/.../power/

Date:		January 2009

Contact:	Rafael J. Wysocki <rjw@sisk.pl>

Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>

Description:

		The /sys/devices/.../power directory contains attributes

		allowing the user space to check and modify some power
@@ -8,7 +8,7 @@ Description: 


What:		/sys/devices/.../power/wakeup

Date:		January 2009

Contact:	Rafael J. Wysocki <rjw@sisk.pl>

Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>

Description:

		The /sys/devices/.../power/wakeup attribute allows the user

		space to check if the device is enabled to wake up the system
@@ -34,7 +34,7 @@ Description: 


What:		/sys/devices/.../power/control

Date:		January 2009

Contact:	Rafael J. Wysocki <rjw@sisk.pl>

Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>

Description:

		The /sys/devices/.../power/control attribute allows the user

		space to control the run-time power management of the device.
@@ -53,7 +53,7 @@ Description: 


What:		/sys/devices/.../power/async

Date:		January 2009

Contact:	Rafael J. Wysocki <rjw@sisk.pl>

Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>

Description:

		The /sys/devices/.../async attribute allows the user space to

		enable or diasble the device's suspend and resume callbacks to
@@ -79,7 +79,7 @@ Description: 


What:		/sys/devices/.../power/wakeup_count

Date:		September 2010

Contact:	Rafael J. Wysocki <rjw@sisk.pl>

Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>

Description:

		The /sys/devices/.../wakeup_count attribute contains the number

		of signaled wakeup events associated with the device.  This
@@ -88,7 +88,7 @@ Description: 


What:		/sys/devices/.../power/wakeup_active_count

Date:		September 2010

Contact:	Rafael J. Wysocki <rjw@sisk.pl>

Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>

Description:

		The /sys/devices/.../wakeup_active_count attribute contains the

		number of times the processing of wakeup events associated with
@@ -98,7 +98,7 @@ Description: 


What:		/sys/devices/.../power/wakeup_abort_count

Date:		February 2012

Contact:	Rafael J. Wysocki <rjw@sisk.pl>

Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>

Description:

		The /sys/devices/.../wakeup_abort_count attribute contains the

		number of times the processing of a wakeup event associated with
@@ -109,7 +109,7 @@ Description: 


What:		/sys/devices/.../power/wakeup_expire_count

Date:		February 2012

Contact:	Rafael J. Wysocki <rjw@sisk.pl>

Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>

Description:

		The /sys/devices/.../wakeup_expire_count attribute contains the

		number of times a wakeup event associated with the device has
@@ -119,7 +119,7 @@ Description: 


What:		/sys/devices/.../power/wakeup_active

Date:		September 2010

Contact:	Rafael J. Wysocki <rjw@sisk.pl>

Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>

Description:

		The /sys/devices/.../wakeup_active attribute contains either 1,

		or 0, depending on whether or not a wakeup event associated with
@@ -129,7 +129,7 @@ Description: 


What:		/sys/devices/.../power/wakeup_total_time_ms

Date:		September 2010

Contact:	Rafael J. Wysocki <rjw@sisk.pl>

Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>

Description:

		The /sys/devices/.../wakeup_total_time_ms attribute contains

		the total time of processing wakeup events associated with the
@@ -139,7 +139,7 @@ Description: 


What:		/sys/devices/.../power/wakeup_max_time_ms

Date:		September 2010

Contact:	Rafael J. Wysocki <rjw@sisk.pl>

Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>

Description:

		The /sys/devices/.../wakeup_max_time_ms attribute contains

		the maximum time of processing a single wakeup event associated
@@ -149,7 +149,7 @@ Description: 


What:		/sys/devices/.../power/wakeup_last_time_ms

Date:		September 2010

Contact:	Rafael J. Wysocki <rjw@sisk.pl>

Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>

Description:

		The /sys/devices/.../wakeup_last_time_ms attribute contains

		the value of the monotonic clock corresponding to the time of
@@ -160,7 +160,7 @@ Description: 


What:		/sys/devices/.../power/wakeup_prevent_sleep_time_ms

Date:		February 2012

Contact:	Rafael J. Wysocki <rjw@sisk.pl>

Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>

Description:

		The /sys/devices/.../wakeup_prevent_sleep_time_ms attribute

		contains the total time the device has been preventing
@@ -189,7 +189,7 @@ Description: 


What:		/sys/devices/.../power/pm_qos_latency_us

Date:		March 2012

Contact:	Rafael J. Wysocki <rjw@sisk.pl>

Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>

Description:

		The /sys/devices/.../power/pm_qos_resume_latency_us attribute

		contains the PM QoS resume latency limit for the given device,
@@ -207,7 +207,7 @@ Description: 


What:		/sys/devices/.../power/pm_qos_no_power_off

Date:		September 2012

Contact:	Rafael J. Wysocki <rjw@sisk.pl>

Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>

Description:

		The /sys/devices/.../power/pm_qos_no_power_off attribute

		is used for manipulating the PM QoS "no power off" flag.  If
@@ -222,7 +222,7 @@ Description: 


What:		/sys/devices/.../power/pm_qos_remote_wakeup

Date:		September 2012

Contact:	Rafael J. Wysocki <rjw@sisk.pl>

Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>

Description:

		The /sys/devices/.../power/pm_qos_remote_wakeup attribute

		is used for manipulating the PM QoS "remote wakeup required"

Documentation/ABI/testing/sysfs-power

+11 −11
Original line number Diff line number Diff line 
What:		/sys/power/

Date:		August 2006

Contact:	Rafael J. Wysocki <rjw@sisk.pl>

Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>

Description:

		The /sys/power directory will contain files that will

		provide a unified interface to the power management
@@ -8,7 +8,7 @@ Description: 


What:		/sys/power/state

Date:		August 2006

Contact:	Rafael J. Wysocki <rjw@sisk.pl>

Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>

Description:

		The /sys/power/state file controls the system power state.

		Reading from this file returns what states are supported,
@@ -22,7 +22,7 @@ Description: 


What:		/sys/power/disk

Date:		September 2006

Contact:	Rafael J. Wysocki <rjw@sisk.pl>

Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>

Description:

		The /sys/power/disk file controls the operating mode of the

		suspend-to-disk mechanism.  Reading from this file returns
@@ -67,7 +67,7 @@ Description: 


What:		/sys/power/image_size

Date:		August 2006

Contact:	Rafael J. Wysocki <rjw@sisk.pl>

Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>

Description:

		The /sys/power/image_size file controls the size of the image

		created by the suspend-to-disk mechanism.  It can be written a
@@ -84,7 +84,7 @@ Description: 


What:		/sys/power/pm_trace

Date:		August 2006

Contact:	Rafael J. Wysocki <rjw@sisk.pl>

Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>

Description:

		The /sys/power/pm_trace file controls the code which saves the

		last PM event point in the RTC across reboots, so that you can
@@ -133,7 +133,7 @@ Description: 


What:		/sys/power/pm_async

Date:		January 2009

Contact:	Rafael J. Wysocki <rjw@sisk.pl>

Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>

Description:

		The /sys/power/pm_async file controls the switch allowing the

		user space to enable or disable asynchronous suspend and resume
@@ -146,7 +146,7 @@ Description: 


What:		/sys/power/wakeup_count

Date:		July 2010

Contact:	Rafael J. Wysocki <rjw@sisk.pl>

Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>

Description:

		The /sys/power/wakeup_count file allows user space to put the

		system into a sleep state while taking into account the
@@ -161,7 +161,7 @@ Description: 


What:		/sys/power/reserved_size

Date:		May 2011

Contact:	Rafael J. Wysocki <rjw@sisk.pl>

Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>

Description:

		The /sys/power/reserved_size file allows user space to control

		the amount of memory reserved for allocations made by device
@@ -175,7 +175,7 @@ Description: 


What:		/sys/power/autosleep

Date:		April 2012

Contact:	Rafael J. Wysocki <rjw@sisk.pl>

Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>

Description:

		The /sys/power/autosleep file can be written one of the strings

		returned by reads from /sys/power/state.  If that happens, a
@@ -192,7 +192,7 @@ Description: 


What:		/sys/power/wake_lock

Date:		February 2012

Contact:	Rafael J. Wysocki <rjw@sisk.pl>

Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>

Description:

		The /sys/power/wake_lock file allows user space to create

		wakeup source objects and activate them on demand (if one of
@@ -219,7 +219,7 @@ Description: 


What:		/sys/power/wake_unlock

Date:		February 2012

Contact:	Rafael J. Wysocki <rjw@sisk.pl>

Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>

Description:

		The /sys/power/wake_unlock file allows user space to deactivate

		wakeup sources created with the help of /sys/power/wake_lock.

Documentation/acpi/dsdt-override.txt

+1 −1
Original line number Diff line number Diff line
@@ -4,4 +4,4 @@ CONFIG_ACPI_CUSTOM_DSDT builds the image into the kernel. 


When to use this method is described in detail on the

Linux/ACPI home page:

http://www.lesswatts.org/projects/acpi/overridingDSDT.php
 
https://01.org/linux-acpi/documentation/overriding-dsdt

Documentation/block/00-INDEX

+2 −0
Original line number Diff line number Diff line
@@ -6,6 +6,8 @@ capability.txt 
	- Generic Block Device Capability (/sys/block/<device>/capability)

cfq-iosched.txt

	- CFQ IO scheduler tunables

cmdline-partition.txt

	- how to specify block device partitions on kernel command line

data-integrity.txt

	- Block data integrity

deadline-iosched.txt