Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 893a7d11 authored by Stephen Boyd's avatar Stephen Boyd Committed by Linus Walleij
Browse files

devicetree: bindings: Make msm8974-pinctrl documentation match code 



The compatible string doesn't have an x in it. Fix it. Also
remove the "qcom" prefix from pins and functions as this binding
uses the generic pinctrl bindings for the pins and functions.

Signed-off-by: default avatarStephen Boyd <sboyd@codeaurora.org>
Reviewed-by: default avatarBjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent e6fae2d0

Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt

+7 −7
Original line number Diff line number Diff line 
Qualcomm MSM8974 TLMM block



Required properties:

- compatible: "qcom,msm8x74-pinctrl"

- compatible: "qcom,msm8974-pinctrl"

- reg: Should be the base address and length of the TLMM block.

- interrupts: Should be the parent IRQ of the TLMM block.

- interrupt-controller: Marks the device node as an interrupt controller.
@@ -42,14 +42,14 @@ Non-empty subnodes must specify the 'pins' property. 
Note that not all properties are valid for all pins.





Valid values for qcom,pins are:

Valid values for pins are:

  gpio0-gpio145

    Supports mux, bias and drive-strength



  sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data

    Supports bias and drive-strength



Valid values for qcom,function are:

Valid values for function are:

  blsp_i2c2, blsp_i2c6, blsp_i2c11, blsp_spi1, blsp_uart2, blsp_uart8, slimbus



  (Note that this is not yet the complete list of functions)
@@ -73,18 +73,18 @@ Example: 


		uart2_default: uart2_default {

			mux {

				qcom,pins = "gpio4", "gpio5";

				qcom,function = "blsp_uart2";

				pins = "gpio4", "gpio5";

				function = "blsp_uart2";

			};



			tx {

				qcom,pins = "gpio4";

				pins = "gpio4";

				drive-strength = <4>;

				bias-disable;

			};



			rx {

				qcom,pins = "gpio5";

				pins = "gpio5";

				drive-strength = <2>;

				bias-pull-up;

			};