Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 84457949 authored by Jamie Iles's avatar Jamie Iles Committed by David Woodhouse
Browse files

mtd: denali: convert to generic DMA API 



Rather than using the PCI specific DMA API, convert to the generic
DMA API so that we can use the Denali NAND controller on other bus
types.

Signed-off-by: default avatarJamie Iles <jamie@jamieiles.com>
Signed-off-by: default avatarArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: default avatarDavid Woodhouse <David.Woodhouse@intel.com>
parent eff3bba6

drivers/mtd/nand/denali.c

+39 −43
Original line number Diff line number Diff line
@@ -19,6 +19,7 @@ 


#include <linux/interrupt.h>

#include <linux/delay.h>

#include <linux/dma-mapping.h>

#include <linux/wait.h>

#include <linux/mutex.h>

#include <linux/slab.h>
@@ -192,7 +193,7 @@ static void reset_bank(struct denali_nand_info *denali) 
	irq_status = wait_for_irq(denali, irq_mask);



	if (irq_status & operation_timeout[denali->flash_bank])

		dev_err(&denali->dev->dev, "reset bank failed.\n");

		dev_err(denali->dev, "reset bank failed.\n");

}



/* Reset the flash controller */
@@ -200,7 +201,7 @@ static uint16_t denali_nand_reset(struct denali_nand_info *denali) 
{

	uint32_t i;



	dev_dbg(&denali->dev->dev, "%s, Line %d, Function: %s\n",

	dev_dbg(denali->dev, "%s, Line %d, Function: %s\n",

		       __FILE__, __LINE__, __func__);



	for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++)
@@ -216,7 +217,7 @@ static uint16_t denali_nand_reset(struct denali_nand_info *denali) 
			cpu_relax();

		if (ioread32(denali->flash_reg + intr_status_addresses[i]) &

			operation_timeout[i])

			dev_dbg(&denali->dev->dev,

			dev_dbg(denali->dev,

			"NAND Reset operation timed out on bank %d\n", i);

	}
@@ -254,7 +255,7 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali, 
	uint16_t acc_clks;

	uint16_t addr_2_data, re_2_we, re_2_re, we_2_re, cs_cnt;



	dev_dbg(&denali->dev->dev, "%s, Line %d, Function: %s\n",

	dev_dbg(denali->dev, "%s, Line %d, Function: %s\n",

		       __FILE__, __LINE__, __func__);



	en_lo = CEIL_DIV(Trp[mode], CLK_X);
@@ -291,7 +292,7 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali, 
		acc_clks++;



	if ((data_invalid - acc_clks * CLK_X) < 2)

		dev_warn(&denali->dev->dev, "%s, Line %d: Warning!\n",

		dev_warn(denali->dev, "%s, Line %d: Warning!\n",

			__FILE__, __LINE__);



	addr_2_data = CEIL_DIV(Tadl[mode], CLK_X);
@@ -419,7 +420,7 @@ static void get_hynix_nand_para(struct denali_nand_info *denali, 
#endif

		break;

	default:

		dev_warn(&denali->dev->dev,

		dev_warn(denali->dev,

			"Spectra: Unknown Hynix NAND (Device ID: 0x%x)."

			"Will use default parameter values instead.\n",

			device_id);
@@ -441,7 +442,7 @@ static void find_valid_banks(struct denali_nand_info *denali) 
		index_addr_read_data(denali,

				(uint32_t)(MODE_11 | (i << 24) | 2), &id[i]);



		dev_dbg(&denali->dev->dev,

		dev_dbg(denali->dev,

			"Return 1st ID for bank[%d]: %x\n", i, id[i]);



		if (i == 0) {
@@ -461,13 +462,13 @@ static void find_valid_banks(struct denali_nand_info *denali) 
		 * Multichip support is not enabled.

		 */

		if (denali->total_used_banks != 1) {

			dev_err(&denali->dev->dev,

			dev_err(denali->dev,

					"Sorry, Intel CE4100 only supports "

					"a single NAND device.\n");

			BUG();

		}

	}

	dev_dbg(&denali->dev->dev,

	dev_dbg(denali->dev,

		"denali->total_used_banks: %d\n", denali->total_used_banks);

}
@@ -501,7 +502,7 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali) 
	uint32_t id_bytes[5], addr;

	uint8_t i, maf_id, device_id;



	dev_dbg(&denali->dev->dev,

	dev_dbg(denali->dev,

			"%s, Line %d, Function: %s\n",

			__FILE__, __LINE__, __func__);
@@ -530,7 +531,7 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali) 
		get_hynix_nand_para(denali, device_id);

	}



	dev_info(&denali->dev->dev,

	dev_info(denali->dev,

			"Dump timing register values:"

			"acc_clks: %d, re_2_we: %d, re_2_re: %d\n"

			"we_2_re: %d, addr_2_data: %d, rdwr_en_lo_cnt: %d\n"
@@ -560,7 +561,7 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali) 
static void denali_set_intr_modes(struct denali_nand_info *denali,

					uint16_t INT_ENABLE)

{

	dev_dbg(&denali->dev->dev, "%s, Line %d, Function: %s\n",

	dev_dbg(denali->dev, "%s, Line %d, Function: %s\n",

		       __FILE__, __LINE__, __func__);



	if (INT_ENABLE)
@@ -800,7 +801,7 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, 
			irq_status = wait_for_irq(denali, irq_mask);



			if (irq_status == 0) {

				dev_err(&denali->dev->dev,

				dev_err(denali->dev,

						"cmd, page, addr on timeout "

						"(0x%x, 0x%x, 0x%x)\n",

						cmd, denali->page, addr);
@@ -875,11 +876,11 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) 
		irq_status = wait_for_irq(denali, irq_mask);



		if (irq_status == 0) {

			dev_err(&denali->dev->dev, "OOB write failed\n");

			dev_err(denali->dev, "OOB write failed\n");

			status = -EIO;

		}

	} else {

		dev_err(&denali->dev->dev, "unable to send pipeline command\n");

		dev_err(denali->dev, "unable to send pipeline command\n");

		status = -EIO;

	}

	return status;
@@ -904,7 +905,7 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) 
		irq_status = wait_for_irq(denali, irq_mask);



		if (irq_status == 0)

			dev_err(&denali->dev->dev, "page on OOB timeout %d\n",

			dev_err(denali->dev, "page on OOB timeout %d\n",

					denali->page);



		/* We set the device back to MAIN_ACCESS here as I observed
@@ -1045,7 +1046,6 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip, 
			const uint8_t *buf, bool raw_xfer)

{

	struct denali_nand_info *denali = mtd_to_denali(mtd);

	struct pci_dev *pci_dev = denali->dev;



	dma_addr_t addr = denali->buf.dma_buf;

	size_t size = denali->mtd.writesize + denali->mtd.oobsize;
@@ -1071,7 +1071,7 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip, 
			mtd->oobsize);

	}



	pci_dma_sync_single_for_device(pci_dev, addr, size, PCI_DMA_TODEVICE);

	dma_sync_single_for_device(denali->dev, addr, size, DMA_TO_DEVICE);



	clear_interrupts(denali);

	denali_enable_dma(denali, true);
@@ -1082,7 +1082,7 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip, 
	irq_status = wait_for_irq(denali, irq_mask);



	if (irq_status == 0) {

		dev_err(&denali->dev->dev,

		dev_err(denali->dev,

				"timeout on write_page (type = %d)\n",

				raw_xfer);

		denali->status =
@@ -1091,7 +1091,7 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip, 
	}



	denali_enable_dma(denali, false);

	pci_dma_sync_single_for_cpu(pci_dev, addr, size, PCI_DMA_TODEVICE);

	dma_sync_single_for_cpu(denali->dev, addr, size, DMA_TO_DEVICE);

}



/* NAND core entry points */
@@ -1139,7 +1139,6 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, 
			    uint8_t *buf, int page)

{

	struct denali_nand_info *denali = mtd_to_denali(mtd);

	struct pci_dev *pci_dev = denali->dev;



	dma_addr_t addr = denali->buf.dma_buf;

	size_t size = denali->mtd.writesize + denali->mtd.oobsize;
@@ -1150,7 +1149,7 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, 
	bool check_erased_page = false;



	if (page != denali->page) {

		dev_err(&denali->dev->dev, "IN %s: page %d is not"

		dev_err(denali->dev, "IN %s: page %d is not"

				" equal to denali->page %d, investigate!!",

				__func__, page, denali->page);

		BUG();
@@ -1159,7 +1158,7 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, 
	setup_ecc_for_xfer(denali, true, false);



	denali_enable_dma(denali, true);

	pci_dma_sync_single_for_device(pci_dev, addr, size, PCI_DMA_FROMDEVICE);

	dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE);



	clear_interrupts(denali);

	denali_setup_dma(denali, DENALI_READ);
@@ -1167,7 +1166,7 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, 
	/* wait for operation to complete */

	irq_status = wait_for_irq(denali, irq_mask);



	pci_dma_sync_single_for_cpu(pci_dev, addr, size, PCI_DMA_FROMDEVICE);

	dma_sync_single_for_cpu(denali->dev, addr, size, DMA_FROM_DEVICE);



	memcpy(buf, denali->buf.buf, mtd->writesize);
@@ -1192,7 +1191,6 @@ static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, 
				uint8_t *buf, int page)

{

	struct denali_nand_info *denali = mtd_to_denali(mtd);

	struct pci_dev *pci_dev = denali->dev;



	dma_addr_t addr = denali->buf.dma_buf;

	size_t size = denali->mtd.writesize + denali->mtd.oobsize;
@@ -1201,7 +1199,7 @@ static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, 
	uint32_t irq_mask = INTR_STATUS0__DMA_CMD_COMP;



	if (page != denali->page) {

		dev_err(&denali->dev->dev, "IN %s: page %d is not"

		dev_err(denali->dev, "IN %s: page %d is not"

				" equal to denali->page %d, investigate!!",

				__func__, page, denali->page);

		BUG();
@@ -1210,7 +1208,7 @@ static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, 
	setup_ecc_for_xfer(denali, false, true);

	denali_enable_dma(denali, true);



	pci_dma_sync_single_for_device(pci_dev, addr, size, PCI_DMA_FROMDEVICE);

	dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE);



	clear_interrupts(denali);

	denali_setup_dma(denali, DENALI_READ);
@@ -1218,7 +1216,7 @@ static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, 
	/* wait for operation to complete */

	irq_status = wait_for_irq(denali, irq_mask);



	pci_dma_sync_single_for_cpu(pci_dev, addr, size, PCI_DMA_FROMDEVICE);

	dma_sync_single_for_cpu(denali->dev, addr, size, DMA_FROM_DEVICE);



	denali_enable_dma(denali, false);
@@ -1330,7 +1328,7 @@ static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data, 
				uint8_t *ecc_code)

{

	struct denali_nand_info *denali = mtd_to_denali(mtd);

	dev_err(&denali->dev->dev,

	dev_err(denali->dev,

			"denali_ecc_calculate called unexpectedly\n");

	BUG();

	return -EIO;
@@ -1340,7 +1338,7 @@ static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data, 
				uint8_t *read_ecc, uint8_t *calc_ecc)

{

	struct denali_nand_info *denali = mtd_to_denali(mtd);

	dev_err(&denali->dev->dev,

	dev_err(denali->dev,

			"denali_ecc_correct called unexpectedly\n");

	BUG();

	return -EIO;
@@ -1349,7 +1347,7 @@ static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data, 
static void denali_ecc_hwctl(struct mtd_info *mtd, int mode)

{

	struct denali_nand_info *denali = mtd_to_denali(mtd);

	dev_err(&denali->dev->dev,

	dev_err(denali->dev,

			"denali_ecc_hwctl called unexpectedly\n");

	BUG();

}
@@ -1484,24 +1482,22 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) 
	}



	/* Is 32-bit DMA supported? */

	ret = pci_set_dma_mask(dev, DMA_BIT_MASK(32));



	ret = dma_set_mask(&dev->dev, DMA_BIT_MASK(32));

	if (ret) {

		printk(KERN_ERR "Spectra: no usable DMA configuration\n");

		goto failed_enable_dev;

	}

	denali->buf.dma_buf =

		pci_map_single(dev, denali->buf.buf,

	denali->buf.dma_buf = dma_map_single(&dev->dev, denali->buf.buf,

					     DENALI_BUF_SIZE,

						PCI_DMA_BIDIRECTIONAL);

					     DMA_BIDIRECTIONAL);



	if (pci_dma_mapping_error(dev, denali->buf.dma_buf)) {

	if (dma_mapping_error(&dev->dev, denali->buf.dma_buf)) {

		dev_err(&dev->dev, "Spectra: failed to map DMA buffer\n");

		goto failed_enable_dev;

	}



	pci_set_master(dev);

	denali->dev = dev;

	denali->dev = &dev->dev;

	denali->mtd.dev.parent = &dev->dev;



	ret = pci_request_regions(dev, DENALI_NAND_NAME);
@@ -1681,8 +1677,8 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) 
failed_req_regions:

	pci_release_regions(dev);

failed_dma_map:

	pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE,

							PCI_DMA_BIDIRECTIONAL);

	dma_unmap_single(&dev->dev, denali->buf.dma_buf, DENALI_BUF_SIZE,

			 DMA_BIDIRECTIONAL);

failed_enable_dev:

	pci_disable_device(dev);

failed_alloc_memery:
@@ -1704,8 +1700,8 @@ static void denali_pci_remove(struct pci_dev *dev) 
	iounmap(denali->flash_mem);

	pci_release_regions(dev);

	pci_disable_device(dev);

	pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE,

							PCI_DMA_BIDIRECTIONAL);

	dma_unmap_single(&dev->dev, denali->buf.dma_buf, DENALI_BUF_SIZE,

			 DMA_BIDIRECTIONAL);

	pci_set_drvdata(dev, NULL);

	kfree(denali);

}

drivers/mtd/nand/denali.h

+1 −1
Original line number Diff line number Diff line
@@ -732,7 +732,7 @@ struct denali_nand_info { 
	int status;

	int platform;

	struct nand_buf buf;

	struct pci_dev *dev;

	struct device *dev;

	int total_used_banks;

	uint32_t block;  /* stored for future use */

	uint16_t page;