ARM: i.MX: Remove mach-cpuimx27sd board file (7c5deaf7) · Commits · e / devices / android_kernel_teracube_2e

arch/arm/configs/imx_v4_v5_defconfig

+0 −3

Original line number	Diff line number	Diff line
		@@ -31,9 +31,6 @@ CONFIG_MACH_EUKREA_CPUIMX25SD=y
		CONFIG_MACH_IMX25_DT=y
		CONFIG_MACH_MX27ADS=y
		CONFIG_MACH_PCM038=y
		CONFIG_MACH_CPUIMX27=y
		CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2=y
		CONFIG_MACH_EUKREA_CPUIMX27_USEUART4=y
		CONFIG_MACH_MX27_3DS=y
		CONFIG_MACH_IMX27_VISSTRIM_M10=y
		CONFIG_MACH_PCA100=y

arch/arm/mach-imx/Kconfig

+0 −50

Original line number	Diff line number	Diff line
		@@ -253,56 +253,6 @@ config MACH_PCM970_BASEBOARD

		endchoice

		config MACH_CPUIMX27
		bool "Eukrea CPUIMX27 module"
		select IMX_HAVE_PLATFORM_FSL_USB2_UDC
		select IMX_HAVE_PLATFORM_IMX2_WDT
		select IMX_HAVE_PLATFORM_IMX_I2C
		select IMX_HAVE_PLATFORM_IMX_UART
		select IMX_HAVE_PLATFORM_MXC_EHCI
		select IMX_HAVE_PLATFORM_MXC_NAND
		select IMX_HAVE_PLATFORM_MXC_W1
		select USB_ULPI_VIEWPORT if USB_ULPI
		select SOC_IMX27
		help
		Include support for Eukrea CPUIMX27 platform. This includes
		specific configurations for the module and its peripherals.

		config MACH_EUKREA_CPUIMX27_USESDHC2
		bool "CPUIMX27 integrates SDHC2 module"
		depends on MACH_CPUIMX27
		select IMX_HAVE_PLATFORM_MXC_MMC
		help
		This adds support for the internal SDHC2 used on CPUIMX27
		for wifi or eMMC.

		config MACH_EUKREA_CPUIMX27_USEUART4
		bool "CPUIMX27 integrates UART4 module"
		depends on MACH_CPUIMX27
		help
		This adds support for the internal UART4 used on CPUIMX27
		for bluetooth.

		choice
		prompt "Baseboard"
		depends on MACH_CPUIMX27
		default MACH_EUKREA_MBIMX27_BASEBOARD

		config MACH_EUKREA_MBIMX27_BASEBOARD
		bool "Eukrea MBIMX27 development board"
		select IMX_HAVE_PLATFORM_IMX_FB
		select IMX_HAVE_PLATFORM_IMX_KEYPAD
		select IMX_HAVE_PLATFORM_IMX_SSI
		select IMX_HAVE_PLATFORM_IMX_UART
		select IMX_HAVE_PLATFORM_MXC_MMC
		select IMX_HAVE_PLATFORM_SPI_IMX
		select LEDS_GPIO_REGISTER
		help
		This adds board specific devices that can be found on Eukrea's
		MBIMX27 evaluation board.

		endchoice

		config MACH_MX27_3DS
		bool "MX27PDK platform"
		select IMX_HAVE_PLATFORM_FSL_USB2_UDC

arch/arm/mach-imx/Makefile

+0 −2

Original line number	Diff line number	Diff line
		@@ -60,8 +60,6 @@ obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
		obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
		obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
		obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o
		obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
		obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
		obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
		obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
		obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o

arch/arm/mach-imx/eukrea-baseboards.h

+1 −9

Original line number	Diff line number	Diff line
		@@ -27,23 +27,15 @@
		* This CPU module needs a baseboard to work. After basic initializing
		* its own devices, it calls baseboard's init function.
		* TODO: Add your own baseboard init function and call it from
		* inside eukrea_cpuimx25_init() eukrea_cpuimx27_init()
		* eukrea_cpuimx35_init() eukrea_cpuimx51_init()
		* or eukrea_cpuimx51sd_init().
		* inside eukrea_cpuimx25_init() or eukrea_cpuimx35_init()
		*
		* This example here is for the development board. Refer
		* mach-mx25/eukrea_mbimxsd-baseboard.c for cpuimx25
		* mach-imx/eukrea_mbimx27-baseboard.c for cpuimx27
		* mach-mx3/eukrea_mbimxsd-baseboard.c for cpuimx35
		* mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51
		* mach-mx5/eukrea_mbimxsd-baseboard.c for cpuimx51sd
		*/

		extern void eukrea_mbimxsd25_baseboard_init(void);
		extern void eukrea_mbimx27_baseboard_init(void);
		extern void eukrea_mbimxsd35_baseboard_init(void);
		extern void eukrea_mbimx51_baseboard_init(void);
		extern void eukrea_mbimxsd51_baseboard_init(void);

		#endif

arch/arm/mach-imx/eukrea_mbimx27-baseboard.c

deleted100644 → 0

+0 −351

Original line number	Diff line number	Diff line
		/*
		* Copyright (C) 2009-2010 Eric Benard - eric@eukrea.com
		*
		* Based on pcm970-baseboard.c which is :
		* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
		*
		* This program is free software; you can redistribute it and/or
		* modify it under the terms of the GNU General Public License
		* as published by the Free Software Foundation; either version 2
		* of the License, or (at your option) any later version.
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*
		* You should have received a copy of the GNU General Public License
		* along with this program; if not, write to the Free Software
		* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
		* MA 02110-1301, USA.
		*/

		#include <linux/gpio.h>
		#include <linux/irq.h>
		#include <linux/platform_device.h>
		#include <linux/spi/spi.h>
		#include <linux/spi/ads7846.h>
		#include <linux/backlight.h>
		#include <video/platform_lcd.h>

		#include <asm/mach/arch.h>

		#include "common.h"
		#include "devices-imx27.h"
		#include "hardware.h"
		#include "iomux-mx27.h"

		static const int eukrea_mbimx27_pins[] __initconst = {
		/* UART2 */
		PE3_PF_UART2_CTS,
		PE4_PF_UART2_RTS,
		PE6_PF_UART2_TXD,
		PE7_PF_UART2_RXD,
		/* UART3 */
		PE8_PF_UART3_TXD,
		PE9_PF_UART3_RXD,
		PE10_PF_UART3_CTS,
		PE11_PF_UART3_RTS,
		/* UART4 */
		#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
		PB26_AF_UART4_RTS,
		PB28_AF_UART4_TXD,
		PB29_AF_UART4_CTS,
		PB31_AF_UART4_RXD,
		#endif
		/* SDHC1*/
		PE18_PF_SD1_D0,
		PE19_PF_SD1_D1,
		PE20_PF_SD1_D2,
		PE21_PF_SD1_D3,
		PE22_PF_SD1_CMD,
		PE23_PF_SD1_CLK,
		/* display */
		PA5_PF_LSCLK,
		PA6_PF_LD0,
		PA7_PF_LD1,
		PA8_PF_LD2,
		PA9_PF_LD3,
		PA10_PF_LD4,
		PA11_PF_LD5,
		PA12_PF_LD6,
		PA13_PF_LD7,
		PA14_PF_LD8,
		PA15_PF_LD9,
		PA16_PF_LD10,
		PA17_PF_LD11,
		PA18_PF_LD12,
		PA19_PF_LD13,
		PA20_PF_LD14,
		PA21_PF_LD15,
		PA22_PF_LD16,
		PA23_PF_LD17,
		PA28_PF_HSYNC,
		PA29_PF_VSYNC,
		PA30_PF_CONTRAST,
		PA31_PF_OE_ACD,
		/* SPI1 */
		PD29_PF_CSPI1_SCLK,
		PD30_PF_CSPI1_MISO,
		PD31_PF_CSPI1_MOSI,
		/* SSI4 */
		#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \
		\|\| defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE)
		PC16_PF_SSI4_FS,
		PC17_PF_SSI4_RXD \| GPIO_PUEN,
		PC18_PF_SSI4_TXD \| GPIO_PUEN,
		PC19_PF_SSI4_CLK,
		#endif
		};

		static const uint32_t eukrea_mbimx27_keymap[] = {
		KEY(0, 0, KEY_UP),
		KEY(0, 1, KEY_DOWN),
		KEY(1, 0, KEY_RIGHT),
		KEY(1, 1, KEY_LEFT),
		};

		static const struct matrix_keymap_data
		eukrea_mbimx27_keymap_data __initconst = {
		.keymap = eukrea_mbimx27_keymap,
		.keymap_size = ARRAY_SIZE(eukrea_mbimx27_keymap),
		};

		static const struct gpio_led eukrea_mbimx27_gpio_leds[] __initconst = {
		{
		.name = "led1",
		.default_trigger = "heartbeat",
		.active_low = 1,
		.gpio = GPIO_PORTF \| 16,
		},
		{
		.name = "led2",
		.default_trigger = "none",
		.active_low = 1,
		.gpio = GPIO_PORTF \| 19,
		},
		};

		static const struct gpio_led_platform_data
		eukrea_mbimx27_gpio_led_info __initconst = {
		.leds = eukrea_mbimx27_gpio_leds,
		.num_leds = ARRAY_SIZE(eukrea_mbimx27_gpio_leds),
		};

		static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
		{
		.mode = {
		.name = "CMO-QVGA",
		.refresh = 60,
		.xres = 320,
		.yres = 240,
		.pixclock = 156000,
		.hsync_len = 30,
		.left_margin = 38,
		.right_margin = 20,
		.vsync_len = 3,
		.upper_margin = 15,
		.lower_margin = 4,
		},
		.pcr = 0xFAD08B80,
		.bpp = 16,
		}, {
		.mode = {
		.name = "DVI-VGA",
		.refresh = 60,
		.xres = 640,
		.yres = 480,
		.pixclock = 32000,
		.hsync_len = 1,
		.left_margin = 35,
		.right_margin = 0,
		.vsync_len = 1,
		.upper_margin = 7,
		.lower_margin = 0,
		},
		.pcr = 0xFA208B80,
		.bpp = 16,
		}, {
		.mode = {
		.name = "DVI-SVGA",
		.refresh = 60,
		.xres = 800,
		.yres = 600,
		.pixclock = 25000,
		.hsync_len = 1,
		.left_margin = 35,
		.right_margin = 0,
		.vsync_len = 1,
		.upper_margin = 7,
		.lower_margin = 0,
		},
		.pcr = 0xFA208B80,
		.bpp = 16,
		},
		};

		static const struct imx_fb_platform_data eukrea_mbimx27_fb_data __initconst = {
		.mode = eukrea_mbimx27_modes,
		.num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),

		.pwmr = 0x00A903FF,
		.lscr1 = 0x00120300,
		.dmacr = 0x00040060,
		};

		static void eukrea_mbimx27_bl_set_intensity(int intensity)
		{
		if (intensity)
		gpio_direction_output(GPIO_PORTE \| 5, 1);
		else
		gpio_direction_output(GPIO_PORTE \| 5, 0);
		}

		static struct generic_bl_info eukrea_mbimx27_bl_info = {
		.name = "eukrea_mbimx27-bl",
		.max_intensity = 0xff,
		.default_intensity = 0xff,
		.set_bl_intensity = eukrea_mbimx27_bl_set_intensity,
		};

		static struct platform_device eukrea_mbimx27_bl_dev = {
		.name = "generic-bl",
		.id = 1,
		.dev = {
		.platform_data = &eukrea_mbimx27_bl_info,
		},
		};

		static void eukrea_mbimx27_lcd_power_set(struct plat_lcd_data *pd,
		unsigned int power)
		{
		if (power)
		gpio_direction_output(GPIO_PORTA \| 25, 1);
		else
		gpio_direction_output(GPIO_PORTA \| 25, 0);
		}

		static struct plat_lcd_data eukrea_mbimx27_lcd_power_data = {
		.set_power = eukrea_mbimx27_lcd_power_set,
		};

		static struct platform_device eukrea_mbimx27_lcd_powerdev = {
		.name = "platform-lcd",
		.dev.platform_data = &eukrea_mbimx27_lcd_power_data,
		};

		static const struct imxuart_platform_data uart_pdata __initconst = {
		.flags = IMXUART_HAVE_RTSCTS,
		};

		#define ADS7846_PENDOWN (GPIO_PORTD \| 25)

		static void __maybe_unused ads7846_dev_init(void)
		{
		if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
		return;
		}
		gpio_direction_input(ADS7846_PENDOWN);
		}

		static int ads7846_get_pendown_state(void)
		{
		return !gpio_get_value(ADS7846_PENDOWN);
		}

		static struct ads7846_platform_data ads7846_config __initdata = {
		.get_pendown_state = ads7846_get_pendown_state,
		.keep_vref_on = 1,
		};

		static struct spi_board_info __maybe_unused
		eukrea_mbimx27_spi_board_info[] __initdata = {
		[0] = {
		.modalias = "ads7846",
		.bus_num = 0,
		.chip_select = 0,
		.max_speed_hz = 1500000,
		/* irq number is run-time assigned */
		.platform_data = &ads7846_config,
		.mode = SPI_MODE_2,
		},
		};

		static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD \| 28};

		static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = {
		.chipselect = eukrea_mbimx27_spi_cs,
		.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
		};

		static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
		{
		I2C_BOARD_INFO("tlv320aic23", 0x1a),
		},
		};

		static const struct imxmmc_platform_data sdhc_pdata __initconst = {
		.dat3_card_detect = 1,
		};

		static const
		struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata __initconst = {
		.flags = IMX_SSI_DMA \| IMX_SSI_USE_I2S_SLAVE,
		};

		/*
		* system init for baseboard usage. Will be called by cpuimx27 init.
		*
		* Add platform devices present on this baseboard and init
		* them from CPU side as far as required to use them later on
		*/
		void __init eukrea_mbimx27_baseboard_init(void)
		{
		mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
		ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");

		imx27_add_imx_uart1(&uart_pdata);
		imx27_add_imx_uart2(&uart_pdata);
		#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
		imx27_add_imx_uart3(&uart_pdata);
		#endif

		imx27_add_imx_fb(&eukrea_mbimx27_fb_data);
		imx27_add_mxc_mmc(0, &sdhc_pdata);

		i2c_register_board_info(0, eukrea_mbimx27_i2c_devices,
		ARRAY_SIZE(eukrea_mbimx27_i2c_devices));

		imx27_add_imx_ssi(0, &eukrea_mbimx27_ssi_pdata);

		#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
		\|\| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
		/* ADS7846 Touchscreen controller init */
		mxc_gpio_mode(GPIO_PORTD \| 25 \| GPIO_GPIO \| GPIO_IN);
		ads7846_dev_init();
		#endif

		/* SPI_CS0 init */
		mxc_gpio_mode(GPIO_PORTD \| 28 \| GPIO_GPIO \| GPIO_OUT);
		imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data);
		eukrea_mbimx27_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(4, 25));
		spi_register_board_info(eukrea_mbimx27_spi_board_info,
		ARRAY_SIZE(eukrea_mbimx27_spi_board_info));

		/* Leds configuration */
		mxc_gpio_mode(GPIO_PORTF \| 16 \| GPIO_GPIO \| GPIO_OUT);
		mxc_gpio_mode(GPIO_PORTF \| 19 \| GPIO_GPIO \| GPIO_OUT);
		/* Backlight */
		mxc_gpio_mode(GPIO_PORTE \| 5 \| GPIO_GPIO \| GPIO_OUT);
		gpio_request(GPIO_PORTE \| 5, "backlight");
		platform_device_register(&eukrea_mbimx27_bl_dev);
		/* LCD Reset */
		mxc_gpio_mode(GPIO_PORTA \| 25 \| GPIO_GPIO \| GPIO_OUT);
		gpio_request(GPIO_PORTA \| 25, "lcd_enable");
		platform_device_register(&eukrea_mbimx27_lcd_powerdev);

		imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data);

		gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info);
		imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
		}