Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 73254c30 authored by Laurent Pinchart's avatar Laurent Pinchart Committed by Mauro Carvalho Chehab
Browse files

[media] mt9m032: Define MT9M032_READ_MODE1 bits 



Replace hardcoded values with #define's.

Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent a54b80b1

drivers/media/i2c/mt9m032.c

+21 −1
Original line number Diff line number Diff line
@@ -90,6 +90,24 @@ 
#define		MT9M032_PLL_CONFIG1_PREDIV_MASK		0x3f

#define		MT9M032_PLL_CONFIG1_MUL_SHIFT		8

#define MT9M032_READ_MODE1				0x1e

#define		MT9M032_READ_MODE1_OUTPUT_BAD_FRAMES	(1 << 13)

#define		MT9M032_READ_MODE1_MAINTAIN_FRAME_RATE	(1 << 12)

#define		MT9M032_READ_MODE1_XOR_LINE_VALID	(1 << 11)

#define		MT9M032_READ_MODE1_CONT_LINE_VALID	(1 << 10)

#define		MT9M032_READ_MODE1_INVERT_TRIGGER	(1 << 9)

#define		MT9M032_READ_MODE1_SNAPSHOT		(1 << 8)

#define		MT9M032_READ_MODE1_GLOBAL_RESET		(1 << 7)

#define		MT9M032_READ_MODE1_BULB_EXPOSURE	(1 << 6)

#define		MT9M032_READ_MODE1_INVERT_STROBE	(1 << 5)

#define		MT9M032_READ_MODE1_STROBE_ENABLE	(1 << 4)

#define		MT9M032_READ_MODE1_STROBE_START_TRIG1	(0 << 2)

#define		MT9M032_READ_MODE1_STROBE_START_EXP	(1 << 2)

#define		MT9M032_READ_MODE1_STROBE_START_SHUTTER	(2 << 2)

#define		MT9M032_READ_MODE1_STROBE_START_TRIG2	(3 << 2)

#define		MT9M032_READ_MODE1_STROBE_END_TRIG1	(0 << 0)

#define		MT9M032_READ_MODE1_STROBE_END_EXP	(1 << 0)

#define		MT9M032_READ_MODE1_STROBE_END_SHUTTER	(2 << 0)

#define		MT9M032_READ_MODE1_STROBE_END_TRIG2	(3 << 0)

#define MT9M032_READ_MODE2				0x20

#define		MT9M032_READ_MODE2_VFLIP_SHIFT		15

#define		MT9M032_READ_MODE2_HFLIP_SHIFT		14
@@ -282,7 +300,9 @@ static int mt9m032_setup_pll(struct mt9m032 *sensor) 
				    MT9P031_PLL_CONTROL_PWRON |

				    MT9P031_PLL_CONTROL_USEPLL);

	if (!ret)		/* more reserved, Continuous, Master Mode */

		ret = mt9m032_write(client, MT9M032_READ_MODE1, 0x8006);

		ret = mt9m032_write(client, MT9M032_READ_MODE1, 0x8000 |

				    MT9M032_READ_MODE1_STROBE_START_EXP |

				    MT9M032_READ_MODE1_STROBE_END_SHUTTER);

	if (!ret) {

		reg_val = (pll.p1 == 6 ? MT9M032_FORMATTER1_PLL_P1_6 : 0)

			| MT9M032_FORMATTER1_PARALLEL | 0x001e; /* 14-bit */