Merge remote-tracking branch 'regulator/topic/helpers' into regulator-next (724d0544) · Commits · e / devices / android_kernel_teracube_2e

drivers/regulator/Makefile

+1 −1

Original line number	Diff line number	Diff line
		@@ -3,7 +3,7 @@
		#


		obj-$(CONFIG_REGULATOR) += core.o dummy.o fixed-helper.o
		obj-$(CONFIG_REGULATOR) += core.o dummy.o fixed-helper.o helpers.o
		obj-$(CONFIG_OF) += of_regulator.o
		obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
		obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o

drivers/regulator/core.c

+0 −427

Original line number	Diff line number	Diff line
		@@ -1904,77 +1904,6 @@ int regulator_disable_deferred(struct regulator *regulator, int ms)
		}
		EXPORT_SYMBOL_GPL(regulator_disable_deferred);

		/**
		* regulator_is_enabled_regmap - standard is_enabled() for regmap users
		*
		* @rdev: regulator to operate on
		*
		* Regulators that use regmap for their register I/O can set the
		* enable_reg and enable_mask fields in their descriptor and then use
		* this as their is_enabled operation, saving some code.
		*/
		int regulator_is_enabled_regmap(struct regulator_dev *rdev)
		{
		unsigned int val;
		int ret;

		ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
		if (ret != 0)
		return ret;

		if (rdev->desc->enable_is_inverted)
		return (val & rdev->desc->enable_mask) == 0;
		else
		return (val & rdev->desc->enable_mask) != 0;
		}
		EXPORT_SYMBOL_GPL(regulator_is_enabled_regmap);

		/**
		* regulator_enable_regmap - standard enable() for regmap users
		*
		* @rdev: regulator to operate on
		*
		* Regulators that use regmap for their register I/O can set the
		* enable_reg and enable_mask fields in their descriptor and then use
		* this as their enable() operation, saving some code.
		*/
		int regulator_enable_regmap(struct regulator_dev *rdev)
		{
		unsigned int val;

		if (rdev->desc->enable_is_inverted)
		val = 0;
		else
		val = rdev->desc->enable_mask;

		return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
		rdev->desc->enable_mask, val);
		}
		EXPORT_SYMBOL_GPL(regulator_enable_regmap);

		/**
		* regulator_disable_regmap - standard disable() for regmap users
		*
		* @rdev: regulator to operate on
		*
		* Regulators that use regmap for their register I/O can set the
		* enable_reg and enable_mask fields in their descriptor and then use
		* this as their disable() operation, saving some code.
		*/
		int regulator_disable_regmap(struct regulator_dev *rdev)
		{
		unsigned int val;

		if (rdev->desc->enable_is_inverted)
		val = rdev->desc->enable_mask;
		else
		val = 0;

		return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
		rdev->desc->enable_mask, val);
		}
		EXPORT_SYMBOL_GPL(regulator_disable_regmap);

		static int _regulator_is_enabled(struct regulator_dev *rdev)
		{
		/* A GPIO control always takes precedence */
		@@ -2059,92 +1988,6 @@ int regulator_count_voltages(struct regulator *regulator)
		}
		EXPORT_SYMBOL_GPL(regulator_count_voltages);

		/**
		* regulator_list_voltage_linear - List voltages with simple calculation
		*
		* @rdev: Regulator device
		* @selector: Selector to convert into a voltage
		*
		* Regulators with a simple linear mapping between voltages and
		* selectors can set min_uV and uV_step in the regulator descriptor
		* and then use this function as their list_voltage() operation,
		*/
		int regulator_list_voltage_linear(struct regulator_dev *rdev,
		unsigned int selector)
		{
		if (selector >= rdev->desc->n_voltages)
		return -EINVAL;
		if (selector < rdev->desc->linear_min_sel)
		return 0;

		selector -= rdev->desc->linear_min_sel;

		return rdev->desc->min_uV + (rdev->desc->uV_step * selector);
		}
		EXPORT_SYMBOL_GPL(regulator_list_voltage_linear);

		/**
		* regulator_list_voltage_linear_range - List voltages for linear ranges
		*
		* @rdev: Regulator device
		* @selector: Selector to convert into a voltage
		*
		* Regulators with a series of simple linear mappings between voltages
		* and selectors can set linear_ranges in the regulator descriptor and
		* then use this function as their list_voltage() operation,
		*/
		int regulator_list_voltage_linear_range(struct regulator_dev *rdev,
		unsigned int selector)
		{
		const struct regulator_linear_range *range;
		int i;

		if (!rdev->desc->n_linear_ranges) {
		BUG_ON(!rdev->desc->n_linear_ranges);
		return -EINVAL;
		}

		for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
		range = &rdev->desc->linear_ranges[i];

		if (!(selector >= range->min_sel &&
		selector <= range->max_sel))
		continue;

		selector -= range->min_sel;

		return range->min_uV + (range->uV_step * selector);
		}

		return -EINVAL;
		}
		EXPORT_SYMBOL_GPL(regulator_list_voltage_linear_range);

		/**
		* regulator_list_voltage_table - List voltages with table based mapping
		*
		* @rdev: Regulator device
		* @selector: Selector to convert into a voltage
		*
		* Regulators with table based mapping between voltages and
		* selectors can set volt_table in the regulator descriptor
		* and then use this function as their list_voltage() operation.
		*/
		int regulator_list_voltage_table(struct regulator_dev *rdev,
		unsigned int selector)
		{
		if (!rdev->desc->volt_table) {
		BUG_ON(!rdev->desc->volt_table);
		return -EINVAL;
		}

		if (selector >= rdev->desc->n_voltages)
		return -EINVAL;

		return rdev->desc->volt_table[selector];
		}
		EXPORT_SYMBOL_GPL(regulator_list_voltage_table);

		/**
		* regulator_list_voltage - enumerate supported voltages
		* @regulator: regulator source
		@@ -2239,235 +2082,6 @@ int regulator_is_supported_voltage(struct regulator *regulator,
		}
		EXPORT_SYMBOL_GPL(regulator_is_supported_voltage);

		/**
		* regulator_get_voltage_sel_regmap - standard get_voltage_sel for regmap users
		*
		* @rdev: regulator to operate on
		*
		* Regulators that use regmap for their register I/O can set the
		* vsel_reg and vsel_mask fields in their descriptor and then use this
		* as their get_voltage_vsel operation, saving some code.
		*/
		int regulator_get_voltage_sel_regmap(struct regulator_dev *rdev)
		{
		unsigned int val;
		int ret;

		ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
		if (ret != 0)
		return ret;

		val &= rdev->desc->vsel_mask;
		val >>= ffs(rdev->desc->vsel_mask) - 1;

		return val;
		}
		EXPORT_SYMBOL_GPL(regulator_get_voltage_sel_regmap);

		/**
		* regulator_set_voltage_sel_regmap - standard set_voltage_sel for regmap users
		*
		* @rdev: regulator to operate on
		* @sel: Selector to set
		*
		* Regulators that use regmap for their register I/O can set the
		* vsel_reg and vsel_mask fields in their descriptor and then use this
		* as their set_voltage_vsel operation, saving some code.
		*/
		int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel)
		{
		int ret;

		sel <<= ffs(rdev->desc->vsel_mask) - 1;

		ret = regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
		rdev->desc->vsel_mask, sel);
		if (ret)
		return ret;

		if (rdev->desc->apply_bit)
		ret = regmap_update_bits(rdev->regmap, rdev->desc->apply_reg,
		rdev->desc->apply_bit,
		rdev->desc->apply_bit);
		return ret;
		}
		EXPORT_SYMBOL_GPL(regulator_set_voltage_sel_regmap);

		/**
		* regulator_map_voltage_iterate - map_voltage() based on list_voltage()
		*
		* @rdev: Regulator to operate on
		* @min_uV: Lower bound for voltage
		* @max_uV: Upper bound for voltage
		*
		* Drivers implementing set_voltage_sel() and list_voltage() can use
		* this as their map_voltage() operation. It will find a suitable
		* voltage by calling list_voltage() until it gets something in bounds
		* for the requested voltages.
		*/
		int regulator_map_voltage_iterate(struct regulator_dev *rdev,
		int min_uV, int max_uV)
		{
		int best_val = INT_MAX;
		int selector = 0;
		int i, ret;

		/* Find the smallest voltage that falls within the specified
		* range.
		*/
		for (i = 0; i < rdev->desc->n_voltages; i++) {
		ret = rdev->desc->ops->list_voltage(rdev, i);
		if (ret < 0)
		continue;

		if (ret < best_val && ret >= min_uV && ret <= max_uV) {
		best_val = ret;
		selector = i;
		}
		}

		if (best_val != INT_MAX)
		return selector;
		else
		return -EINVAL;
		}
		EXPORT_SYMBOL_GPL(regulator_map_voltage_iterate);

		/**
		* regulator_map_voltage_ascend - map_voltage() for ascendant voltage list
		*
		* @rdev: Regulator to operate on
		* @min_uV: Lower bound for voltage
		* @max_uV: Upper bound for voltage
		*
		* Drivers that have ascendant voltage list can use this as their
		* map_voltage() operation.
		*/
		int regulator_map_voltage_ascend(struct regulator_dev *rdev,
		int min_uV, int max_uV)
		{
		int i, ret;

		for (i = 0; i < rdev->desc->n_voltages; i++) {
		ret = rdev->desc->ops->list_voltage(rdev, i);
		if (ret < 0)
		continue;

		if (ret > max_uV)
		break;

		if (ret >= min_uV && ret <= max_uV)
		return i;
		}

		return -EINVAL;
		}
		EXPORT_SYMBOL_GPL(regulator_map_voltage_ascend);

		/**
		* regulator_map_voltage_linear - map_voltage() for simple linear mappings
		*
		* @rdev: Regulator to operate on
		* @min_uV: Lower bound for voltage
		* @max_uV: Upper bound for voltage
		*
		* Drivers providing min_uV and uV_step in their regulator_desc can
		* use this as their map_voltage() operation.
		*/
		int regulator_map_voltage_linear(struct regulator_dev *rdev,
		int min_uV, int max_uV)
		{
		int ret, voltage;

		/* Allow uV_step to be 0 for fixed voltage */
		if (rdev->desc->n_voltages == 1 && rdev->desc->uV_step == 0) {
		if (min_uV <= rdev->desc->min_uV && rdev->desc->min_uV <= max_uV)
		return 0;
		else
		return -EINVAL;
		}

		if (!rdev->desc->uV_step) {
		BUG_ON(!rdev->desc->uV_step);
		return -EINVAL;
		}

		if (min_uV < rdev->desc->min_uV)
		min_uV = rdev->desc->min_uV;

		ret = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step);
		if (ret < 0)
		return ret;

		ret += rdev->desc->linear_min_sel;

		/* Map back into a voltage to verify we're still in bounds */
		voltage = rdev->desc->ops->list_voltage(rdev, ret);
		if (voltage < min_uV \|\| voltage > max_uV)
		return -EINVAL;

		return ret;
		}
		EXPORT_SYMBOL_GPL(regulator_map_voltage_linear);

		/**
		* regulator_map_voltage_linear - map_voltage() for multiple linear ranges
		*
		* @rdev: Regulator to operate on
		* @min_uV: Lower bound for voltage
		* @max_uV: Upper bound for voltage
		*
		* Drivers providing linear_ranges in their descriptor can use this as
		* their map_voltage() callback.
		*/
		int regulator_map_voltage_linear_range(struct regulator_dev *rdev,
		int min_uV, int max_uV)
		{
		const struct regulator_linear_range *range;
		int ret = -EINVAL;
		int voltage, i;

		if (!rdev->desc->n_linear_ranges) {
		BUG_ON(!rdev->desc->n_linear_ranges);
		return -EINVAL;
		}

		for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
		range = &rdev->desc->linear_ranges[i];

		if (!(min_uV <= range->max_uV && max_uV >= range->min_uV))
		continue;

		if (min_uV <= range->min_uV)
		min_uV = range->min_uV;

		/* range->uV_step == 0 means fixed voltage range */
		if (range->uV_step == 0) {
		ret = 0;
		} else {
		ret = DIV_ROUND_UP(min_uV - range->min_uV,
		range->uV_step);
		if (ret < 0)
		return ret;
		}

		ret += range->min_sel;

		break;
		}

		if (i == rdev->desc->n_linear_ranges)
		return -EINVAL;

		/* Map back into a voltage to verify we're still in bounds */
		voltage = rdev->desc->ops->list_voltage(rdev, ret);
		if (voltage < min_uV \|\| voltage > max_uV)
		return -EINVAL;

		return ret;
		}
		EXPORT_SYMBOL_GPL(regulator_map_voltage_linear_range);

		static int _regulator_do_set_voltage(struct regulator_dev *rdev,
		int min_uV, int max_uV)
		{
		@@ -3070,47 +2684,6 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load)
		}
		EXPORT_SYMBOL_GPL(regulator_set_optimum_mode);

		/**
		* regulator_set_bypass_regmap - Default set_bypass() using regmap
		*
		* @rdev: device to operate on.
		* @enable: state to set.
		*/
		int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable)
		{
		unsigned int val;

		if (enable)
		val = rdev->desc->bypass_mask;
		else
		val = 0;

		return regmap_update_bits(rdev->regmap, rdev->desc->bypass_reg,
		rdev->desc->bypass_mask, val);
		}
		EXPORT_SYMBOL_GPL(regulator_set_bypass_regmap);

		/**
		* regulator_get_bypass_regmap - Default get_bypass() using regmap
		*
		* @rdev: device to operate on.
		* @enable: current state.
		*/
		int regulator_get_bypass_regmap(struct regulator_dev rdev, bool enable)
		{
		unsigned int val;
		int ret;

		ret = regmap_read(rdev->regmap, rdev->desc->bypass_reg, &val);
		if (ret != 0)
		return ret;

		*enable = val & rdev->desc->bypass_mask;

		return 0;
		}
		EXPORT_SYMBOL_GPL(regulator_get_bypass_regmap);

		/**
		* regulator_allow_bypass - allow the regulator to go into bypass mode
		*

drivers/regulator/da903x.c

+10 −35

Original line number	Diff line number	Diff line
		@@ -252,39 +252,12 @@ static int da9034_set_dvc_voltage_sel(struct regulator_dev *rdev,
		return ret;
		}

		static int da9034_map_ldo12_voltage(struct regulator_dev *rdev,
		int min_uV, int max_uV)
		{
		struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
		int sel;

		if (check_range(info, min_uV, max_uV)) {
		pr_err("invalid voltage range (%d, %d) uV\n", min_uV, max_uV);
		return -EINVAL;
		}

		sel = DIV_ROUND_UP(min_uV - info->desc.min_uV, info->desc.uV_step);
		sel = (sel >= 20) ? sel - 12 : ((sel > 7) ? 8 : sel);

		return sel;
		}

		static int da9034_list_ldo12_voltage(struct regulator_dev *rdev,
		unsigned selector)
		{
		struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
		int volt;

		if (selector >= 8)
		volt = 2700000 + rdev->desc->uV_step * (selector - 8);
		else
		volt = rdev->desc->min_uV + rdev->desc->uV_step * selector;

		if (volt > info->max_uV)
		return -EINVAL;

		return volt;
		}
		static const struct regulator_linear_range da9034_ldo12_ranges[] = {
		{ .min_uV = 1700000, .max_uV = 2050000, .min_sel = 0, .max_sel = 7,
		.uV_step = 50000 },
		{ .min_uV = 2700000, .max_uV = 3050000, .min_sel = 8, .max_sel = 15,
		.uV_step = 50000 },
		};

		static struct regulator_ops da903x_regulator_ldo_ops = {
		.set_voltage_sel = da903x_set_voltage_sel,
		@@ -332,8 +305,8 @@ static struct regulator_ops da9034_regulator_dvc_ops = {
		static struct regulator_ops da9034_regulator_ldo12_ops = {
		.set_voltage_sel = da903x_set_voltage_sel,
		.get_voltage_sel = da903x_get_voltage_sel,
		.list_voltage = da9034_list_ldo12_voltage,
		.map_voltage = da9034_map_ldo12_voltage,
		.list_voltage = regulator_list_voltage_linear_range,
		.map_voltage = regulator_map_voltage_linear_range,
		.enable = da903x_enable,
		.disable = da903x_disable,
		.is_enabled = da903x_is_enabled,
		@@ -476,6 +449,8 @@ static int da903x_regulator_probe(struct platform_device *pdev)
		if (ri->desc.id == DA9034_ID_LDO12) {
		ri->desc.ops = &da9034_regulator_ldo12_ops;
		ri->desc.n_voltages = 16;
		ri->desc.linear_ranges = da9034_ldo12_ranges;
		ri->desc.n_linear_ranges = ARRAY_SIZE(da9034_ldo12_ranges);
		}

		if (ri->desc.id == DA9030_ID_LDO14)

drivers/regulator/helpers.c

0 → 100644

+447 −0

File added.

Preview size limit exceeded, changes collapsed.