Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 6adb21c2 authored by Ravishankar Karkala Mallikarjunayya's avatar Ravishankar Karkala Mallikarjunayya Committed by Greg Kroah-Hartman
Browse files

Staging: comedi: dt2814: Block comment issue fixed 



This fixes up a WARNING: 'Block comments use a trailing */ on a
separate line' found by the checkpatch.pl tool.

Signed-off-by: default avatarRavishankar Karkala Mallikarjunayya <ravishankarkm32@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent c9b0f2b6

drivers/staging/comedi/drivers/dt2814.c

+37 −35
Original line number Diff line number Diff line 
/*

    comedi/drivers/dt2814.c

    Hardware driver for Data Translation DT2814



    COMEDI - Linux Control and Measurement Device Interface

    Copyright (C) 1998 David A. Schleef <ds@schleef.org>



    This program is free software; you can redistribute it and/or modify

    it under the terms of the GNU General Public License as published by

    the Free Software Foundation; either version 2 of the License, or

    (at your option) any later version.



    This program is distributed in the hope that it will be useful,

    but WITHOUT ANY WARRANTY; without even the implied warranty of

    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

    GNU General Public License for more details.

 * comedi/drivers/dt2814.c

 * Hardware driver for Data Translation DT2814

 *

 * COMEDI - Linux Control and Measurement Device Interface

 * Copyright (C) 1998 David A. Schleef <ds@schleef.org>

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; either version 2 of the License, or

 * (at your option) any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */

/*

Driver: dt2814

Description: Data Translation DT2814

Author: ds

Status: complete

Devices: [Data Translation] DT2814 (dt2814)



Configuration options:

  [0] - I/O port base address

  [1] - IRQ



This card has 16 analog inputs multiplexed onto a 12 bit ADC.  There

is a minimally useful onboard clock.  The base frequency for the

clock is selected by jumpers, and the clock divider can be selected

via programmed I/O.  Unfortunately, the clock divider can only be

a power of 10, from 1 to 10^7, of which only 3 or 4 are useful.  In

addition, the clock does not seem to be very accurate.

 * Driver: dt2814

 * Description: Data Translation DT2814

 * Author: ds

 * Status: complete

 * Devices: [Data Translation] DT2814 (dt2814)

 *

 * Configuration options:

 * [0] - I/O port base address

 * [1] - IRQ

 *

 * This card has 16 analog inputs multiplexed onto a 12 bit ADC.  There

 * is a minimally useful onboard clock.  The base frequency for the

 * clock is selected by jumpers, and the clock divider can be selected

 * via programmed I/O.  Unfortunately, the clock divider can only be

 * a power of 10, from 1 to 10^7, of which only 3 or 4 are useful.  In

 * addition, the clock does not seem to be very accurate.

 */



#include <linux/module.h>
@@ -215,8 +215,10 @@ static irqreturn_t dt2814_interrupt(int irq, void *d) 
		int i;



		outb(0, dev->iobase + DT2814_CSR);

		/* note: turning off timed mode triggers another

		   sample. */

		/*

		 * note: turning off timed mode triggers another

		 * sample.

		 */



		for (i = 0; i < DT2814_TIMEOUT; i++) {

			if (inb(dev->iobase + DT2814_CSR) & DT2814_FINISH)