Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 6680d940 authored by Sundar Iyer's avatar Sundar Iyer Committed by Samuel Ortiz
Browse files

mfd/ab8500: remove spi support



Since the Ab8500 v1.0, the SPI support is deprecated on the HW.

Signed-off-by: default avatarSundar Iyer <sundar.iyer@stericsson.com>
Signed-off-by: default avatarSamuel Ortiz <sameo@linux.intel.com>
parent 1d83864c
Loading
Loading
Loading
Loading
+4 −4
Original line number Diff line number Diff line
@@ -496,13 +496,13 @@ config EZX_PCAP

config AB8500_CORE
	bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
	depends on GENERIC_HARDIRQS && ABX500_CORE && SPI_MASTER
	depends on GENERIC_HARDIRQS && ABX500_CORE
	select MFD_CORE
	help
	  Select this option to enable access to AB8500 power management
	  chip. This connects to U8500 either on the SSP/SPI bus
	  or the I2C bus via PRCMU. It also adds the irq_chip
	  parts for handling the Mixed Signal chip events.
	  chip. This connects to U8500 either on the SSP/SPI bus (deprecated
	  since hardware version v1.0) or the I2C bus via PRCMU. It also adds
	  the irq_chip parts for handling the Mixed Signal chip events.
	  This chip embeds various other multimedia funtionalities as well.

config AB8500_I2C_CORE
+1 −1
Original line number Diff line number Diff line
@@ -70,7 +70,7 @@ obj-$(CONFIG_ABX500_CORE) += abx500-core.o
obj-$(CONFIG_AB3100_CORE)	+= ab3100-core.o
obj-$(CONFIG_AB3100_OTP)	+= ab3100-otp.o
obj-$(CONFIG_AB3550_CORE)	+= ab3550-core.o
obj-$(CONFIG_AB8500_CORE)	+= ab8500-core.o ab8500-spi.o
obj-$(CONFIG_AB8500_CORE)	+= ab8500-core.o
obj-$(CONFIG_AB8500_I2C_CORE)	+= ab8500-i2c.o
obj-$(CONFIG_AB8500_DEBUG)	+= ab8500-debugfs.o
obj-$(CONFIG_MFD_TIMBERDALE)    += timberdale.o

drivers/mfd/ab8500-spi.c

deleted100644 → 0
+0 −143
Original line number Diff line number Diff line
/*
 * Copyright (C) ST-Ericsson SA 2010
 *
 * License Terms: GNU General Public License v2
 * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
 */

#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/mfd/ab8500.h>

/*
 * This funtion writes to any AB8500 registers using
 * SPI protocol &  before it writes it packs the data
 * in the below 24 bit frame format
 *
 *	 *|------------------------------------|
 *	 *| 23|22...18|17.......10|9|8|7......0|
 *	 *| r/w  bank       adr          data  |
 *	 * ------------------------------------
 *
 * This function shouldn't be called from interrupt
 * context
 */
static int ab8500_spi_write(struct ab8500 *ab8500, u16 addr, u8 data)
{
	struct spi_device *spi = container_of(ab8500->dev, struct spi_device,
					      dev);
	unsigned long spi_data = addr << 10 | data;
	struct spi_transfer xfer;
	struct spi_message msg;

	ab8500->tx_buf[0] = spi_data;
	ab8500->rx_buf[0] = 0;

	xfer.tx_buf	= ab8500->tx_buf;
	xfer.rx_buf	= NULL;
	xfer.len	= sizeof(unsigned long);

	spi_message_init(&msg);
	spi_message_add_tail(&xfer, &msg);

	return spi_sync(spi, &msg);
}

static int ab8500_spi_read(struct ab8500 *ab8500, u16 addr)
{
	struct spi_device *spi = container_of(ab8500->dev, struct spi_device,
					      dev);
	unsigned long spi_data = 1 << 23 | addr << 10;
	struct spi_transfer xfer;
	struct spi_message msg;
	int ret;

	ab8500->tx_buf[0] = spi_data;
	ab8500->rx_buf[0] = 0;

	xfer.tx_buf	= ab8500->tx_buf;
	xfer.rx_buf	= ab8500->rx_buf;
	xfer.len	= sizeof(unsigned long);

	spi_message_init(&msg);
	spi_message_add_tail(&xfer, &msg);

	ret = spi_sync(spi, &msg);
	if (!ret)
		/*
		 * Only the 8 lowermost bytes are
		 * defined with value, the rest may
		 * vary depending on chip/board noise.
		 */
		ret = ab8500->rx_buf[0] & 0xFFU;

	return ret;
}

static int __devinit ab8500_spi_probe(struct spi_device *spi)
{
	struct ab8500 *ab8500;
	int ret;

	spi->bits_per_word = 24;
	ret = spi_setup(spi);
	if (ret < 0)
		return ret;

	ab8500 = kzalloc(sizeof *ab8500, GFP_KERNEL);
	if (!ab8500)
		return -ENOMEM;

	ab8500->dev = &spi->dev;
	ab8500->irq = spi->irq;

	ab8500->read = ab8500_spi_read;
	ab8500->write = ab8500_spi_write;

	spi_set_drvdata(spi, ab8500);

	ret = ab8500_init(ab8500);
	if (ret)
		kfree(ab8500);

	return ret;
}

static int __devexit ab8500_spi_remove(struct spi_device *spi)
{
	struct ab8500 *ab8500 = spi_get_drvdata(spi);

	ab8500_exit(ab8500);
	kfree(ab8500);

	return 0;
}

static struct spi_driver ab8500_spi_driver = {
	.driver = {
		.name = "ab8500-spi",
		.owner = THIS_MODULE,
	},
	.probe	= ab8500_spi_probe,
	.remove	= __devexit_p(ab8500_spi_remove)
};

static int __init ab8500_spi_init(void)
{
	return spi_register_driver(&ab8500_spi_driver);
}
subsys_initcall(ab8500_spi_init);

static void __exit ab8500_spi_exit(void)
{
	spi_unregister_driver(&ab8500_spi_driver);
}
module_exit(ab8500_spi_exit);

MODULE_AUTHOR("Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com");
MODULE_DESCRIPTION("AB8500 SPI");
MODULE_LICENSE("GPL v2");