Loading Documentation/DocBook/device-drivers.tmpl +10 −2 Original line number Diff line number Diff line Loading @@ -102,9 +102,12 @@ X!Iinclude/linux/kobject.h !Iinclude/linux/device.h </sect1> <sect1><title>Device Drivers Base</title> !Idrivers/base/init.c !Edrivers/base/driver.c !Edrivers/base/core.c !Edrivers/base/syscore.c !Edrivers/base/class.c !Idrivers/base/node.c !Edrivers/base/firmware_class.c !Edrivers/base/transport_class.c <!-- Cannot be included, because Loading @@ -113,13 +116,18 @@ X!Iinclude/linux/kobject.h exceed allowed 44 characters maximum X!Edrivers/base/attribute_container.c --> !Edrivers/base/sys.c !Edrivers/base/dd.c <!-- X!Edrivers/base/interface.c --> !Iinclude/linux/platform_device.h !Edrivers/base/platform.c !Edrivers/base/bus.c </sect1> <sect1><title>Device Drivers DMA Management</title> !Edrivers/base/dma-buf.c !Edrivers/base/dma-coherent.c !Edrivers/base/dma-mapping.c </sect1> <sect1><title>Device Drivers Power Management</title> !Edrivers/base/power/main.c Loading Loading @@ -219,7 +227,7 @@ X!Isound/sound_firmware.c <chapter id="uart16x50"> <title>16x50 UART Driver</title> !Edrivers/tty/serial/serial_core.c !Edrivers/tty/serial/8250.c !Edrivers/tty/serial/8250/8250.c </chapter> <chapter id="fbdev"> Loading Documentation/input/event-codes.txt +64 −8 Original line number Diff line number Diff line Loading @@ -17,11 +17,11 @@ reports supported by a device are also provided by sysfs in class/input/event*/device/capabilities/, and the properties of a device are provided in class/input/event*/device/properties. Types: ========== Types are groupings of codes under a logical input construct. Each type has a set of applicable codes to be used in generating events. See the Codes section for details on valid codes for each type. Event types: =========== Event types are groupings of codes under a logical input construct. Each type has a set of applicable codes to be used in generating events. See the Codes section for details on valid codes for each type. * EV_SYN: - Used as markers to separate events. Events may be separated in time or in Loading Loading @@ -63,9 +63,9 @@ for details on valid codes for each type. * EV_FF_STATUS: - Used to receive force feedback device status. Codes: ========== Codes define the precise type of event. Event codes: =========== Event codes define the precise type of event. EV_SYN: ---------- Loading Loading @@ -220,6 +220,56 @@ EV_PWR: EV_PWR events are a special type of event used specifically for power mangement. Its usage is not well defined. To be addressed later. Device properties: ================= Normally, userspace sets up an input device based on the data it emits, i.e., the event types. In the case of two devices emitting the same event types, additional information can be provided in the form of device properties. INPUT_PROP_DIRECT + INPUT_PROP_POINTER: -------------------------------------- The INPUT_PROP_DIRECT property indicates that device coordinates should be directly mapped to screen coordinates (not taking into account trivial transformations, such as scaling, flipping and rotating). Non-direct input devices require non-trivial transformation, such as absolute to relative transformation for touchpads. Typical direct input devices: touchscreens, drawing tablets; non-direct devices: touchpads, mice. The INPUT_PROP_POINTER property indicates that the device is not transposed on the screen and thus requires use of an on-screen pointer to trace user's movements. Typical pointer devices: touchpads, tablets, mice; non-pointer device: touchscreen. If neither INPUT_PROP_DIRECT or INPUT_PROP_POINTER are set, the property is considered undefined and the device type should be deduced in the traditional way, using emitted event types. INPUT_PROP_BUTTONPAD: -------------------- For touchpads where the button is placed beneath the surface, such that pressing down on the pad causes a button click, this property should be set. Common in clickpad notebooks and macbooks from 2009 and onwards. Originally, the buttonpad property was coded into the bcm5974 driver version field under the name integrated button. For backwards compatibility, both methods need to be checked in userspace. INPUT_PROP_SEMI_MT: ------------------ Some touchpads, most common between 2008 and 2011, can detect the presence of multiple contacts without resolving the individual positions; only the number of contacts and a rectangular shape is known. For such touchpads, the semi-mt property should be set. Depending on the device, the rectangle may enclose all touches, like a bounding box, or just some of them, for instance the two most recent touches. The diversity makes the rectangle of limited use, but some gestures can normally be extracted from it. If INPUT_PROP_SEMI_MT is not set, the device is assumed to be a true MT device. Guidelines: ========== The guidelines below ensure proper single-touch and multi-finger functionality. Loading @@ -240,6 +290,8 @@ used to report when a touch is active on the screen. BTN_{MOUSE,LEFT,MIDDLE,RIGHT} must not be reported as the result of touch contact. BTN_TOOL_<name> events should be reported where possible. For new hardware, INPUT_PROP_DIRECT should be set. Trackpads: ---------- Legacy trackpads that only provide relative position information must report Loading @@ -250,6 +302,8 @@ location of the touch. BTN_TOUCH should be used to report when a touch is active on the trackpad. Where multi-finger support is available, BTN_TOOL_<name> should be used to report the number of touches active on the trackpad. For new hardware, INPUT_PROP_POINTER should be set. Tablets: ---------- BTN_TOOL_<name> events must be reported when a stylus or other tool is active on Loading @@ -260,3 +314,5 @@ button may be used for buttons on the tablet except BTN_{MOUSE,LEFT}. BTN_{0,1,2,etc} are good generic codes for unlabeled buttons. Do not use meaningful buttons, like BTN_FORWARD, unless the button is labeled for that purpose on the device. For new hardware, both INPUT_PROP_DIRECT and INPUT_PROP_POINTER should be set. Documentation/sysctl/kernel.txt +2 −0 Original line number Diff line number Diff line Loading @@ -601,6 +601,8 @@ can be ORed together: instead of using the one provided by the hardware. 512 - A kernel warning has occurred. 1024 - A module from drivers/staging was loaded. 2048 - The system is working around a severe firmware bug. 4096 - An out-of-tree module has been loaded. ============================================================== Loading MAINTAINERS +19 −31 Original line number Diff line number Diff line Loading @@ -159,7 +159,7 @@ S: Maintained F: drivers/net/ethernet/realtek/r8169.c 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER M: Greg Kroah-Hartman <gregkh@suse.de> M: Greg Kroah-Hartman <gregkh@linuxfoundation.org> L: linux-serial@vger.kernel.org W: http://serial.sourceforge.net S: Maintained Loading Loading @@ -789,12 +789,6 @@ F: arch/arm/mach-mx*/ F: arch/arm/mach-imx/ F: arch/arm/plat-mxc/ ARM/FREESCALE IMX51 M: Amit Kucheria <amit.kucheria@canonical.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-mx5/ ARM/FREESCALE IMX6 M: Shawn Guo <shawn.guo@linaro.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) Loading Loading @@ -1783,9 +1777,9 @@ X: net/wireless/wext* CHAR and MISC DRIVERS M: Arnd Bergmann <arnd@arndb.de> M: Greg Kroah-Hartman <greg@kroah.com> M: Greg Kroah-Hartman <gregkh@linuxfoundation.org> T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git S: Maintained S: Supported F: drivers/char/* F: drivers/misc/* Loading Loading @@ -2287,7 +2281,7 @@ F: drivers/acpi/dock.c DOCUMENTATION M: Randy Dunlap <rdunlap@xenotime.net> L: linux-doc@vger.kernel.org T: quilt http://userweb.kernel.org/~rdunlap/kernel-doc-patches/current/ T: quilt http://xenotime.net/kernel-doc-patches/current/ S: Maintained F: Documentation/ Loading Loading @@ -2320,7 +2314,7 @@ F: lib/lru_cache.c F: Documentation/blockdev/drbd/ DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS M: Greg Kroah-Hartman <gregkh@suse.de> M: Greg Kroah-Hartman <gregkh@linuxfoundation.org> T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6.git S: Supported F: Documentation/kobject.txt Loading Loading @@ -3992,11 +3986,11 @@ M: Rusty Russell <rusty@rustcorp.com.au> L: lguest@lists.ozlabs.org W: http://lguest.ozlabs.org/ S: Odd Fixes F: Documentation/virtual/lguest/ F: arch/x86/include/asm/lguest*.h F: arch/x86/lguest/ F: drivers/lguest/ F: include/linux/lguest*.h F: arch/x86/include/asm/lguest*.h F: tools/lguest/ LINUX FOR IBM pSERIES (RS/6000) M: Paul Mackerras <paulus@au.ibm.com> Loading Loading @@ -4136,7 +4130,7 @@ L: linux-ntfs-dev@lists.sourceforge.net W: http://www.linux-ntfs.org/content/view/19/37/ S: Maintained F: Documentation/ldm.txt F: fs/partitions/ldm.* F: block/partitions/ldm.* LogFS M: Joern Engel <joern@logfs.org> Loading Loading @@ -5633,7 +5627,7 @@ W: http://www.ibm.com/developerworks/linux/linux390/ S: Supported F: arch/s390/ F: drivers/s390/ F: fs/partitions/ibm.c F: block/partitions/ibm.c F: Documentation/s390/ F: Documentation/DocBook/s390* Loading Loading @@ -6276,15 +6270,15 @@ S: Maintained F: arch/alpha/kernel/srm_env.c STABLE BRANCH M: Greg Kroah-Hartman <greg@kroah.com> M: Greg Kroah-Hartman <gregkh@linuxfoundation.org> L: stable@vger.kernel.org S: Maintained S: Supported STAGING SUBSYSTEM M: Greg Kroah-Hartman <gregkh@suse.de> M: Greg Kroah-Hartman <gregkh@linuxfoundation.org> T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git L: devel@driverdev.osuosl.org S: Maintained S: Supported F: drivers/staging/ STAGING - AGERE HERMES II and II.5 WIRELESS DRIVERS Loading Loading @@ -6396,11 +6390,6 @@ M: Omar Ramirez Luna <omar.ramirez@ti.com> S: Odd Fixes F: drivers/staging/tidspbridge/ STAGING - TRIDENT TVMASTER TMxxxx USB VIDEO CAPTURE DRIVERS L: linux-media@vger.kernel.org S: Odd Fixes F: drivers/staging/tm6000/ STAGING - USB ENE SM/MS CARD READER DRIVER M: Al Cho <acho@novell.com> S: Odd Fixes Loading Loading @@ -6669,8 +6658,8 @@ S: Maintained K: ^Subject:.*(?i)trivial TTY LAYER M: Greg Kroah-Hartman <gregkh@suse.de> S: Maintained M: Greg Kroah-Hartman <gregkh@linuxfoundation.org> S: Supported T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git F: drivers/tty/ F: drivers/tty/serial/serial_core.c Loading Loading @@ -6958,7 +6947,7 @@ S: Maintained F: drivers/usb/serial/digi_acceleport.c USB SERIAL DRIVER M: Greg Kroah-Hartman <gregkh@suse.de> M: Greg Kroah-Hartman <gregkh@linuxfoundation.org> L: linux-usb@vger.kernel.org S: Supported F: Documentation/usb/usb-serial.txt Loading @@ -6973,9 +6962,8 @@ S: Maintained F: drivers/usb/serial/empeg.c USB SERIAL KEYSPAN DRIVER M: Greg Kroah-Hartman <greg@kroah.com> M: Greg Kroah-Hartman <gregkh@linuxfoundation.org> L: linux-usb@vger.kernel.org W: http://www.kroah.com/linux/ S: Maintained F: drivers/usb/serial/*keyspan* Loading Loading @@ -7003,7 +6991,7 @@ F: Documentation/video4linux/sn9c102.txt F: drivers/media/video/sn9c102/ USB SUBSYSTEM M: Greg Kroah-Hartman <gregkh@suse.de> M: Greg Kroah-Hartman <gregkh@linuxfoundation.org> L: linux-usb@vger.kernel.org W: http://www.linux-usb.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6.git Loading Loading @@ -7090,7 +7078,7 @@ F: fs/hppfs/ USERSPACE I/O (UIO) M: "Hans J. Koch" <hjk@hansjkoch.de> M: Greg Kroah-Hartman <gregkh@suse.de> M: Greg Kroah-Hartman <gregkh@linuxfoundation.org> S: Maintained F: Documentation/DocBook/uio-howto.tmpl F: drivers/uio/ Loading Makefile +1 −1 Original line number Diff line number Diff line VERSION = 3 PATCHLEVEL = 3 SUBLEVEL = 0 EXTRAVERSION = -rc2 EXTRAVERSION = -rc3 NAME = Saber-toothed Squirrel # *DOCUMENTATION* Loading Loading
Documentation/DocBook/device-drivers.tmpl +10 −2 Original line number Diff line number Diff line Loading @@ -102,9 +102,12 @@ X!Iinclude/linux/kobject.h !Iinclude/linux/device.h </sect1> <sect1><title>Device Drivers Base</title> !Idrivers/base/init.c !Edrivers/base/driver.c !Edrivers/base/core.c !Edrivers/base/syscore.c !Edrivers/base/class.c !Idrivers/base/node.c !Edrivers/base/firmware_class.c !Edrivers/base/transport_class.c <!-- Cannot be included, because Loading @@ -113,13 +116,18 @@ X!Iinclude/linux/kobject.h exceed allowed 44 characters maximum X!Edrivers/base/attribute_container.c --> !Edrivers/base/sys.c !Edrivers/base/dd.c <!-- X!Edrivers/base/interface.c --> !Iinclude/linux/platform_device.h !Edrivers/base/platform.c !Edrivers/base/bus.c </sect1> <sect1><title>Device Drivers DMA Management</title> !Edrivers/base/dma-buf.c !Edrivers/base/dma-coherent.c !Edrivers/base/dma-mapping.c </sect1> <sect1><title>Device Drivers Power Management</title> !Edrivers/base/power/main.c Loading Loading @@ -219,7 +227,7 @@ X!Isound/sound_firmware.c <chapter id="uart16x50"> <title>16x50 UART Driver</title> !Edrivers/tty/serial/serial_core.c !Edrivers/tty/serial/8250.c !Edrivers/tty/serial/8250/8250.c </chapter> <chapter id="fbdev"> Loading
Documentation/input/event-codes.txt +64 −8 Original line number Diff line number Diff line Loading @@ -17,11 +17,11 @@ reports supported by a device are also provided by sysfs in class/input/event*/device/capabilities/, and the properties of a device are provided in class/input/event*/device/properties. Types: ========== Types are groupings of codes under a logical input construct. Each type has a set of applicable codes to be used in generating events. See the Codes section for details on valid codes for each type. Event types: =========== Event types are groupings of codes under a logical input construct. Each type has a set of applicable codes to be used in generating events. See the Codes section for details on valid codes for each type. * EV_SYN: - Used as markers to separate events. Events may be separated in time or in Loading Loading @@ -63,9 +63,9 @@ for details on valid codes for each type. * EV_FF_STATUS: - Used to receive force feedback device status. Codes: ========== Codes define the precise type of event. Event codes: =========== Event codes define the precise type of event. EV_SYN: ---------- Loading Loading @@ -220,6 +220,56 @@ EV_PWR: EV_PWR events are a special type of event used specifically for power mangement. Its usage is not well defined. To be addressed later. Device properties: ================= Normally, userspace sets up an input device based on the data it emits, i.e., the event types. In the case of two devices emitting the same event types, additional information can be provided in the form of device properties. INPUT_PROP_DIRECT + INPUT_PROP_POINTER: -------------------------------------- The INPUT_PROP_DIRECT property indicates that device coordinates should be directly mapped to screen coordinates (not taking into account trivial transformations, such as scaling, flipping and rotating). Non-direct input devices require non-trivial transformation, such as absolute to relative transformation for touchpads. Typical direct input devices: touchscreens, drawing tablets; non-direct devices: touchpads, mice. The INPUT_PROP_POINTER property indicates that the device is not transposed on the screen and thus requires use of an on-screen pointer to trace user's movements. Typical pointer devices: touchpads, tablets, mice; non-pointer device: touchscreen. If neither INPUT_PROP_DIRECT or INPUT_PROP_POINTER are set, the property is considered undefined and the device type should be deduced in the traditional way, using emitted event types. INPUT_PROP_BUTTONPAD: -------------------- For touchpads where the button is placed beneath the surface, such that pressing down on the pad causes a button click, this property should be set. Common in clickpad notebooks and macbooks from 2009 and onwards. Originally, the buttonpad property was coded into the bcm5974 driver version field under the name integrated button. For backwards compatibility, both methods need to be checked in userspace. INPUT_PROP_SEMI_MT: ------------------ Some touchpads, most common between 2008 and 2011, can detect the presence of multiple contacts without resolving the individual positions; only the number of contacts and a rectangular shape is known. For such touchpads, the semi-mt property should be set. Depending on the device, the rectangle may enclose all touches, like a bounding box, or just some of them, for instance the two most recent touches. The diversity makes the rectangle of limited use, but some gestures can normally be extracted from it. If INPUT_PROP_SEMI_MT is not set, the device is assumed to be a true MT device. Guidelines: ========== The guidelines below ensure proper single-touch and multi-finger functionality. Loading @@ -240,6 +290,8 @@ used to report when a touch is active on the screen. BTN_{MOUSE,LEFT,MIDDLE,RIGHT} must not be reported as the result of touch contact. BTN_TOOL_<name> events should be reported where possible. For new hardware, INPUT_PROP_DIRECT should be set. Trackpads: ---------- Legacy trackpads that only provide relative position information must report Loading @@ -250,6 +302,8 @@ location of the touch. BTN_TOUCH should be used to report when a touch is active on the trackpad. Where multi-finger support is available, BTN_TOOL_<name> should be used to report the number of touches active on the trackpad. For new hardware, INPUT_PROP_POINTER should be set. Tablets: ---------- BTN_TOOL_<name> events must be reported when a stylus or other tool is active on Loading @@ -260,3 +314,5 @@ button may be used for buttons on the tablet except BTN_{MOUSE,LEFT}. BTN_{0,1,2,etc} are good generic codes for unlabeled buttons. Do not use meaningful buttons, like BTN_FORWARD, unless the button is labeled for that purpose on the device. For new hardware, both INPUT_PROP_DIRECT and INPUT_PROP_POINTER should be set.
Documentation/sysctl/kernel.txt +2 −0 Original line number Diff line number Diff line Loading @@ -601,6 +601,8 @@ can be ORed together: instead of using the one provided by the hardware. 512 - A kernel warning has occurred. 1024 - A module from drivers/staging was loaded. 2048 - The system is working around a severe firmware bug. 4096 - An out-of-tree module has been loaded. ============================================================== Loading
MAINTAINERS +19 −31 Original line number Diff line number Diff line Loading @@ -159,7 +159,7 @@ S: Maintained F: drivers/net/ethernet/realtek/r8169.c 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER M: Greg Kroah-Hartman <gregkh@suse.de> M: Greg Kroah-Hartman <gregkh@linuxfoundation.org> L: linux-serial@vger.kernel.org W: http://serial.sourceforge.net S: Maintained Loading Loading @@ -789,12 +789,6 @@ F: arch/arm/mach-mx*/ F: arch/arm/mach-imx/ F: arch/arm/plat-mxc/ ARM/FREESCALE IMX51 M: Amit Kucheria <amit.kucheria@canonical.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-mx5/ ARM/FREESCALE IMX6 M: Shawn Guo <shawn.guo@linaro.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) Loading Loading @@ -1783,9 +1777,9 @@ X: net/wireless/wext* CHAR and MISC DRIVERS M: Arnd Bergmann <arnd@arndb.de> M: Greg Kroah-Hartman <greg@kroah.com> M: Greg Kroah-Hartman <gregkh@linuxfoundation.org> T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git S: Maintained S: Supported F: drivers/char/* F: drivers/misc/* Loading Loading @@ -2287,7 +2281,7 @@ F: drivers/acpi/dock.c DOCUMENTATION M: Randy Dunlap <rdunlap@xenotime.net> L: linux-doc@vger.kernel.org T: quilt http://userweb.kernel.org/~rdunlap/kernel-doc-patches/current/ T: quilt http://xenotime.net/kernel-doc-patches/current/ S: Maintained F: Documentation/ Loading Loading @@ -2320,7 +2314,7 @@ F: lib/lru_cache.c F: Documentation/blockdev/drbd/ DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS M: Greg Kroah-Hartman <gregkh@suse.de> M: Greg Kroah-Hartman <gregkh@linuxfoundation.org> T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6.git S: Supported F: Documentation/kobject.txt Loading Loading @@ -3992,11 +3986,11 @@ M: Rusty Russell <rusty@rustcorp.com.au> L: lguest@lists.ozlabs.org W: http://lguest.ozlabs.org/ S: Odd Fixes F: Documentation/virtual/lguest/ F: arch/x86/include/asm/lguest*.h F: arch/x86/lguest/ F: drivers/lguest/ F: include/linux/lguest*.h F: arch/x86/include/asm/lguest*.h F: tools/lguest/ LINUX FOR IBM pSERIES (RS/6000) M: Paul Mackerras <paulus@au.ibm.com> Loading Loading @@ -4136,7 +4130,7 @@ L: linux-ntfs-dev@lists.sourceforge.net W: http://www.linux-ntfs.org/content/view/19/37/ S: Maintained F: Documentation/ldm.txt F: fs/partitions/ldm.* F: block/partitions/ldm.* LogFS M: Joern Engel <joern@logfs.org> Loading Loading @@ -5633,7 +5627,7 @@ W: http://www.ibm.com/developerworks/linux/linux390/ S: Supported F: arch/s390/ F: drivers/s390/ F: fs/partitions/ibm.c F: block/partitions/ibm.c F: Documentation/s390/ F: Documentation/DocBook/s390* Loading Loading @@ -6276,15 +6270,15 @@ S: Maintained F: arch/alpha/kernel/srm_env.c STABLE BRANCH M: Greg Kroah-Hartman <greg@kroah.com> M: Greg Kroah-Hartman <gregkh@linuxfoundation.org> L: stable@vger.kernel.org S: Maintained S: Supported STAGING SUBSYSTEM M: Greg Kroah-Hartman <gregkh@suse.de> M: Greg Kroah-Hartman <gregkh@linuxfoundation.org> T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git L: devel@driverdev.osuosl.org S: Maintained S: Supported F: drivers/staging/ STAGING - AGERE HERMES II and II.5 WIRELESS DRIVERS Loading Loading @@ -6396,11 +6390,6 @@ M: Omar Ramirez Luna <omar.ramirez@ti.com> S: Odd Fixes F: drivers/staging/tidspbridge/ STAGING - TRIDENT TVMASTER TMxxxx USB VIDEO CAPTURE DRIVERS L: linux-media@vger.kernel.org S: Odd Fixes F: drivers/staging/tm6000/ STAGING - USB ENE SM/MS CARD READER DRIVER M: Al Cho <acho@novell.com> S: Odd Fixes Loading Loading @@ -6669,8 +6658,8 @@ S: Maintained K: ^Subject:.*(?i)trivial TTY LAYER M: Greg Kroah-Hartman <gregkh@suse.de> S: Maintained M: Greg Kroah-Hartman <gregkh@linuxfoundation.org> S: Supported T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git F: drivers/tty/ F: drivers/tty/serial/serial_core.c Loading Loading @@ -6958,7 +6947,7 @@ S: Maintained F: drivers/usb/serial/digi_acceleport.c USB SERIAL DRIVER M: Greg Kroah-Hartman <gregkh@suse.de> M: Greg Kroah-Hartman <gregkh@linuxfoundation.org> L: linux-usb@vger.kernel.org S: Supported F: Documentation/usb/usb-serial.txt Loading @@ -6973,9 +6962,8 @@ S: Maintained F: drivers/usb/serial/empeg.c USB SERIAL KEYSPAN DRIVER M: Greg Kroah-Hartman <greg@kroah.com> M: Greg Kroah-Hartman <gregkh@linuxfoundation.org> L: linux-usb@vger.kernel.org W: http://www.kroah.com/linux/ S: Maintained F: drivers/usb/serial/*keyspan* Loading Loading @@ -7003,7 +6991,7 @@ F: Documentation/video4linux/sn9c102.txt F: drivers/media/video/sn9c102/ USB SUBSYSTEM M: Greg Kroah-Hartman <gregkh@suse.de> M: Greg Kroah-Hartman <gregkh@linuxfoundation.org> L: linux-usb@vger.kernel.org W: http://www.linux-usb.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6.git Loading Loading @@ -7090,7 +7078,7 @@ F: fs/hppfs/ USERSPACE I/O (UIO) M: "Hans J. Koch" <hjk@hansjkoch.de> M: Greg Kroah-Hartman <gregkh@suse.de> M: Greg Kroah-Hartman <gregkh@linuxfoundation.org> S: Maintained F: Documentation/DocBook/uio-howto.tmpl F: drivers/uio/ Loading
Makefile +1 −1 Original line number Diff line number Diff line VERSION = 3 PATCHLEVEL = 3 SUBLEVEL = 0 EXTRAVERSION = -rc2 EXTRAVERSION = -rc3 NAME = Saber-toothed Squirrel # *DOCUMENTATION* Loading
