Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 5bb47b9f authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (171 commits)
  Blackfin arch: fix bug - BF527 0.2 silicon has different CPUID (DSPID) value
  Blackfin arch: Enlarge flash partition for kenel for bf533/bf537 boards
  Blackfin arch: fix bug: kernel crash when enable SDIO host driver
  Blackfin arch: Print FP at level KERN_NOTICE
  Blackfin arch: drop ad73311 test code
  Blackfin arch: update board default configs
  Blackfin arch: Set PB4 as the default irq for bf548 board v1.4+.
  Blackfin arch: fix typo in early printk bit size processing
  Blackfin arch: enable reprogram cclk and sclk for bf518f-ezbrd
  Blackfin arch: add SDIO host driver platform data
  Blackfin arch: fix bug - kernel stops at initial console
  Blackfin arch: fix bug - kernel crash after config IP for ethernet port
  Blackfin arch: add sdh support for bf518f-ezbrd
  Blackfin arch: fix bug - kernel detects BF532 incorrectly
  Blackfin arch: add () to avoid warnings from gcc
  Blackfin arch: change HWTRACE Kconfig and set it on default
  Blackfin arch: Clean oprofile build path for blackfin
  Blackfin arch: remove hardware PM code, oprofile not use it
  Blackfin arch: rewrite get_sclk()/get_vco()
  Blackfin arch: cleanup and unify the ins functions
  ...
parents 2f2408a8 06af15e0

Documentation/blackfin/00-INDEX

+3 −0
Original line number Diff line number Diff line
@@ -9,3 +9,6 @@ cachefeatures.txt 


Filesystems

	- Requirements for mounting the root file system.



bfin-gpio-note.txt

	- Notes in developing/using bfin-gpio driver.

Documentation/blackfin/bfin-gpio-notes.txt

0 → 100644
+71 −0
Original line number Diff line number Diff line 
/*

 * File:         Documentation/blackfin/bfin-gpio-note.txt

 * Based on:

 * Author:

 *

 * Created:      $Id: bfin-gpio-note.txt 2008-11-24 16:42 grafyang $

 * Description:  This file contains the notes in developing/using bfin-gpio.

 *

 *

 * Rev:

 *

 * Modified:

 *               Copyright 2004-2008 Analog Devices Inc.

 *

 * Bugs:         Enter bugs at http://blackfin.uclinux.org/

 *

 */





1. Blackfin GPIO introduction



    There are many GPIO pins on Blackfin. Most of these pins are muxed to

    multi-functions. They can be configured as peripheral, or just as GPIO,

    configured to input with interrupt enabled, or output.



    For detailed information, please see "arch/blackfin/kernel/bfin_gpio.c",

    or the relevant HRM.





2. Avoiding resource conflict



    Followed function groups are used to avoiding resource conflict,

    - Use the pin as peripheral,

	int peripheral_request(unsigned short per, const char *label);

	int peripheral_request_list(const unsigned short per[], const char *label);

	void peripheral_free(unsigned short per);

	void peripheral_free_list(const unsigned short per[]);

    - Use the pin as GPIO,

	int bfin_gpio_request(unsigned gpio, const char *label);

	void bfin_gpio_free(unsigned gpio);

    - Use the pin as GPIO interrupt,

	int bfin_gpio_irq_request(unsigned gpio, const char *label);

	void bfin_gpio_irq_free(unsigned gpio);



    The request functions will record the function state for a certain pin,

    the free functions will clear it's function state.

    Once a pin is requested, it can't be requested again before it is freed by

    previous caller, otherwise kernel will dump stacks, and the request

    function fail.

    These functions are wrapped by other functions, most of the users need not

    care.





3. But there are some exceptions

    - Kernel permit the identical GPIO be requested both as GPIO and GPIO

    interrut.

    Some drivers, like gpio-keys, need this behavior. Kernel only print out

    warning messages like,

	bfin-gpio: GPIO 24 is already reserved by gpio-keys: BTN0, and you are

configuring it as IRQ!



        Note: Consider the case that, if there are two drivers need the

	identical GPIO, one of them use it as GPIO, the other use it as

	GPIO interrupt. This will really cause resource conflict. So if

	there is any abnormal driver behavior, please check the bfin-gpio

	warning messages.



    - Kernel permit the identical GPIO be requested from the same driver twice.

arch/blackfin/Kconfig

+167 −37
Original line number Diff line number Diff line
@@ -26,6 +26,7 @@ config BLACKFIN 
	default y

	select HAVE_IDE

	select HAVE_OPROFILE

	select ARCH_WANT_OPTIONAL_GPIOLIB



config ZONE_DMA

	bool
@@ -59,10 +60,6 @@ config GENERIC_CALIBRATE_DELAY 
	bool

	default y



config HARDWARE_PM

	def_bool y

	depends on OPROFILE



source "init/Kconfig"



source "kernel/Kconfig.preempt"
@@ -77,6 +74,26 @@ choice 
	prompt "CPU"

	default BF533



config BF512

	bool "BF512"

	help

	  BF512 Processor Support.



config BF514

	bool "BF514"

	help

	  BF514 Processor Support.



config BF516

	bool "BF516"

	help

	  BF516 Processor Support.



config BF518

	bool "BF518"

	help

	  BF518 Processor Support.



config BF522

	bool "BF522"

	help
@@ -137,6 +154,16 @@ config BF537 
	help

	  BF537 Processor Support.



config BF538

	bool "BF538"

	help

	  BF538 Processor Support.



config BF539

	bool "BF539"

	help

	  BF539 Processor Support.



config BF542

	bool "BF542"

	help
@@ -169,28 +196,55 @@ config BF561 


endchoice



config SMP

	depends on BF561

	bool "Symmetric multi-processing support"

	---help---

	  This enables support for systems with more than one CPU,

	  like the dual core BF561. If you have a system with only one

	  CPU, say N. If you have a system with more than one CPU, say Y.



	  If you don't know what to do here, say N.



config NR_CPUS

	int

	depends on SMP

	default 2 if BF561



config IRQ_PER_CPU

	bool

	depends on SMP

	default y



config TICK_SOURCE_SYSTMR0

	bool

	select BFIN_GPTIMERS

	depends on SMP

	default y



config BF_REV_MIN

	int

	default 0 if (BF52x || BF54x)

	default 0 if (BF51x || BF52x || BF54x)

	default 2 if (BF537 || BF536 || BF534)

	default 3 if (BF561 ||BF533 || BF532 || BF531)

	default 4 if (BF538 || BF539)



config BF_REV_MAX

	int

	default 2 if (BF52x || BF54x)

	default 2 if (BF51x || BF52x || BF54x)

	default 3 if (BF537 || BF536 || BF534)

	default 5 if (BF561)

	default 5 if (BF561 || BF538 || BF539)

	default 6 if (BF533 || BF532 || BF531)



choice

	prompt "Silicon Rev"

	default BF_REV_0_1 if (BF52x || BF54x)

	default BF_REV_0_1 if (BF51x || BF52x || BF54x)

	default BF_REV_0_2 if (BF534 || BF536 || BF537)

	default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF561)



config BF_REV_0_0

	bool "0.0"

	depends on (BF52x || BF54x)

	depends on (BF51x || BF52x || BF54x)



config BF_REV_0_1

	bool "0.1"
@@ -206,11 +260,11 @@ config BF_REV_0_3 


config BF_REV_0_4

	bool "0.4"

	depends on (BF561 || BF533 || BF532 || BF531)

	depends on (BF561 || BF533 || BF532 || BF531 || BF538 || BF539)



config BF_REV_0_5

	bool "0.5"

	depends on (BF561 || BF533 || BF532 || BF531)

	depends on (BF561 || BF533 || BF532 || BF531 || BF538 || BF539)



config BF_REV_0_6

	bool "0.6"
@@ -224,6 +278,11 @@ config BF_REV_NONE 


endchoice



config BF51x

	bool

	depends on (BF512 || BF514 || BF516 || BF518)

	default y



config BF52x

	bool

	depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527)
@@ -258,7 +317,7 @@ config MEM_MT48LC16M16A2TG_75 


config MEM_MT48LC32M8A2_75

	bool

	depends on (BFIN537_STAMP || PNAV10)

	depends on (BFIN537_STAMP || PNAV10 || BFIN538_EZKIT)

	default y



config MEM_MT48LC8M32B2B5_7
@@ -271,10 +330,17 @@ config MEM_MT48LC32M16A2TG_75 
	depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP || BFIN526_EZBRD)

	default y



config MEM_MT48LC32M8A2_75

	bool

	depends on (BFIN518F_EZBRD)

	default y



source "arch/blackfin/mach-bf518/Kconfig"

source "arch/blackfin/mach-bf527/Kconfig"

source "arch/blackfin/mach-bf533/Kconfig"

source "arch/blackfin/mach-bf561/Kconfig"

source "arch/blackfin/mach-bf537/Kconfig"

source "arch/blackfin/mach-bf538/Kconfig"

source "arch/blackfin/mach-bf548/Kconfig"



menu "Board customizations"
@@ -307,6 +373,7 @@ config BOOT_LOAD 


config ROM_BASE

	hex "Kernel ROM Base"

	depends on ROMKERNEL

	default "0x20040000"

	range 0x20000000 0x20400000 if !(BF54x || BF561)

	range 0x20000000 0x30000000 if (BF54x || BF561)
@@ -318,7 +385,7 @@ config CLKIN_HZ 
	int "Frequency of the crystal on the board in Hz"

	default "11059200" if BFIN533_STAMP

	default "27000000" if BFIN533_EZKIT

	default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD)

	default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN538_EZKIT || BFIN518F-EZBRD)

	default "30000000" if BFIN561_EZKIT

	default "24576000" if PNAV10

	default "10000000" if BFIN532_IP0X
@@ -354,11 +421,11 @@ config VCO_MULT 
	range 1 64

	default "22" if BFIN533_EZKIT

	default "45" if BFIN533_STAMP

	default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM)

	default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT)

	default "22" if BFIN533_BLUETECHNIX_CM

	default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)

	default "20" if BFIN561_EZKIT

	default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD)

	default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN518F_EZBRD)

	help

	  This controls the frequency of the on-chip PLL. This can be between 1 and 64.

	  PLL Frequency = (Crystal Frequency) * (this setting)
@@ -407,19 +474,70 @@ config MEM_MT46V32M16_5B 
	bool "MT46V32M16_5B"

endchoice



config MAX_MEM_SIZE

	int "Max SDRAM Memory Size in MBytes"

	depends on !MPU

	default 512

choice

	prompt "DDR/SDRAM Timing"

	depends on BFIN_KERNEL_CLOCK

	default BFIN_KERNEL_CLOCK_MEMINIT_CALC

	help

	  This option allows you to specify Blackfin SDRAM/DDR Timing parameters

	  The calculated SDRAM timing parameters may not be 100%

	  accurate - This option is therefore marked experimental.



config BFIN_KERNEL_CLOCK_MEMINIT_CALC

	bool "Calculate Timings (EXPERIMENTAL)"

	depends on EXPERIMENTAL



config BFIN_KERNEL_CLOCK_MEMINIT_SPEC

	bool "Provide accurate Timings based on target SCLK"

	help

	  This is the max memory size that the kernel will create CPLB

	  tables for.  Your system will not be able to handle any more.

	  Please consult the Blackfin Hardware Reference Manuals as well

	  as the memory device datasheet.

	  http://docs.blackfin.uclinux.org/doku.php?id=bfin:sdram

endchoice



menu "Memory Init Control"

	depends on BFIN_KERNEL_CLOCK_MEMINIT_SPEC



config MEM_DDRCTL0

	depends on BF54x

	hex "DDRCTL0"

	default 0x0



config MEM_DDRCTL1

	depends on BF54x

	hex "DDRCTL1"

	default 0x0



config MEM_DDRCTL2

	depends on BF54x

	hex "DDRCTL2"

	default 0x0



config MEM_EBIU_DDRQUE

	depends on BF54x

	hex "DDRQUE"

	default 0x0



config MEM_SDRRC

	depends on !BF54x

	hex "SDRRC"

	default 0x0



config MEM_SDGCTL

	depends on !BF54x

	hex "SDGCTL"

	default 0x0

endmenu



#

# Max & Min Speeds for various Chips

#

config MAX_VCO_HZ

	int

	default 400000000 if BF512

	default 400000000 if BF514

	default 400000000 if BF516

	default 400000000 if BF518

	default 600000000 if BF522

	default 400000000 if BF523

	default 400000000 if BF524
@@ -459,6 +577,7 @@ source kernel/Kconfig.hz 


config GENERIC_TIME

	bool "Generic time"

	depends on !SMP

	default y



config GENERIC_CLOCKEVENTS
@@ -533,6 +652,7 @@ endmenu 




menu "Blackfin Kernel Optimizations"

	depends on !SMP



comment "Memory Optimizations"
@@ -655,6 +775,17 @@ config APP_STACK_L1 


	  Currently only works with FLAT binaries.



config EXCEPTION_L1_SCRATCH

	bool "Locate exception stack in L1 Scratch Memory"

	default n

	depends on !APP_STACK_L1 && !SYSCALL_TAB_L1

	help

	  Whenever an exception occurs, use the L1 Scratch memory for

	  stack storage.  You cannot place the stacks of FLAT binaries

	  in L1 when using this option.



	  If you don't use L1 Scratch, then you should say Y here.



comment "Speed Optimizations"

config BFIN_INS_LOWOVERHEAD

	bool "ins[bwl] low overhead, higher interrupt latency"
@@ -684,7 +815,6 @@ config BFIN_INS_LOWOVERHEAD 


endmenu





choice

	prompt "Kernel executes from"

	help
@@ -714,17 +844,9 @@ config BFIN_GPTIMERS 
	  To compile this driver as a module, choose M here: the module

	  will be called gptimers.ko.



config BFIN_DMA_5XX

	bool "Enable DMA Support"

	depends on (BF52x || BF53x || BF561 || BF54x)

	default y

	help

	  DMA driver for BF5xx.



choice

	prompt "Uncached SDRAM region"

	prompt "Uncached DMA region"

	default DMA_UNCACHED_1M

	depends on BFIN_DMA_5XX

config DMA_UNCACHED_4M

	bool "Enable 4M DMA region"

config DMA_UNCACHED_2M
@@ -751,9 +873,11 @@ config BFIN_ICACHE_LOCK 
choice

	prompt "Policy"

	depends on BFIN_DCACHE

	default BFIN_WB

	default BFIN_WB if !SMP

	default BFIN_WT if SMP

config BFIN_WB

	bool "Write back"

	depends on !SMP

	help

	  Write Back Policy:

	    Cached data will be written back to SDRAM only when needed.
@@ -790,7 +914,7 @@ endchoice 


config BFIN_L2_CACHEABLE

	bool "Cache L2 SRAM"

	depends on (BFIN_DCACHE || BFIN_ICACHE) && (BF54x || BF561)

	depends on (BFIN_DCACHE || BFIN_ICACHE) && (BF54x || (BF561 && !SMP))

	default n

	help

	  Select to make L2 SRAM cacheable in L1 data and instruction cache.
@@ -980,7 +1104,7 @@ config PM_WAKEUP_GPIO_NUMBER 
	int "GPIO number"

	range 0 47

	depends on PM_WAKEUP_BY_GPIO

	default 2 if BFIN537_STAMP

	default 2



choice

	prompt "GPIO Polarity"
@@ -1003,7 +1127,7 @@ comment "Possible Suspend Mem / Hibernate Wake-Up Sources" 


config PM_BFIN_WAKE_PH6

	bool "Allow Wake-Up from on-chip PHY or PH6 GP"

	depends on PM && (BF52x || BF534 || BF536 || BF537)

	depends on PM && (BF51x || BF52x || BF534 || BF536 || BF537)

	default n

	help

	  Enable PHY and PH6 GP Wake-Up (Voltage Regulator Power-Up)
@@ -1020,6 +1144,12 @@ menu "CPU Frequency scaling" 


source "drivers/cpufreq/Kconfig"



config BFIN_CPU_FREQ

	bool

	depends on CPU_FREQ

	select CPU_FREQ_TABLE

	default y



config CPU_VOLTAGE

	bool "CPU Voltage scaling"

	depends on EXPERIMENTAL

arch/blackfin/Kconfig.debug

+26 −4
Original line number Diff line number Diff line
@@ -2,9 +2,31 @@ menu "Kernel hacking" 


source "lib/Kconfig.debug"



config DEBUG_STACKOVERFLOW

	bool "Check for stack overflows"

	depends on DEBUG_KERNEL

	help

	  This option will cause messages to be printed if free stack space

	  drops below a certain limit.



config DEBUG_STACK_USAGE

	bool "Enable stack utilization instrumentation"

	depends on DEBUG_KERNEL

	help

	  Enables the display of the minimum amount of free stack which each

	  task has ever had available in the sysrq-T output.



	  This option will slow down process creation somewhat.



config HAVE_ARCH_KGDB

	def_bool y



config KGDB_TESTCASE

	tristate "KGDB: for test case in expect"

	default n

	help

	  This is a kgdb test case for automated testing.



config DEBUG_VERBOSE

	bool "Verbose fault messages"

	default y
@@ -182,11 +204,11 @@ config DEBUG_BFIN_HWTRACE_EXPAND_LEN 
	  4 for (2^4) 16k, or 4096 entries



config DEBUG_BFIN_NO_KERN_HWTRACE

	bool "Trace user apps (turn off hwtrace in kernel)"

	bool "Turn off hwtrace in CPLB handlers"

	depends on DEBUG_BFIN_HWTRACE_ON

	default n

	default y

	help

	  Some pieces of the kernel contain a lot of flow changes which can

	  The CPLB error handler contains a lot of flow changes which can

	  quickly fill up the hardware trace buffer.  When debugging crashes,

	  the hardware trace may indicate that the problem lies in kernel

	  space when in reality an application is buggy.

arch/blackfin/Makefile

+15 −3
Original line number Diff line number Diff line
@@ -21,6 +21,10 @@ KALLSYMS += --symbol-prefix=_ 
KBUILD_DEFCONFIG := BF537-STAMP_defconfig



# setup the machine name and the machine dependent settings

machine-$(CONFIG_BF512) := bf518

machine-$(CONFIG_BF514) := bf518

machine-$(CONFIG_BF516) := bf518

machine-$(CONFIG_BF518) := bf518

machine-$(CONFIG_BF522) := bf527

machine-$(CONFIG_BF523) := bf527

machine-$(CONFIG_BF524) := bf527
@@ -33,6 +37,8 @@ machine-$(CONFIG_BF533) := bf533 
machine-$(CONFIG_BF534) := bf537

machine-$(CONFIG_BF536) := bf537

machine-$(CONFIG_BF537) := bf537

machine-$(CONFIG_BF538) := bf538

machine-$(CONFIG_BF539) := bf538

machine-$(CONFIG_BF542) := bf548

machine-$(CONFIG_BF544) := bf548

machine-$(CONFIG_BF547) := bf548
@@ -42,6 +48,10 @@ machine-$(CONFIG_BF561) := bf561 
MACHINE := $(machine-y)

export MACHINE



cpu-$(CONFIG_BF512) := bf512

cpu-$(CONFIG_BF514) := bf514

cpu-$(CONFIG_BF516) := bf516

cpu-$(CONFIG_BF518) := bf518

cpu-$(CONFIG_BF522) := bf522

cpu-$(CONFIG_BF523) := bf523

cpu-$(CONFIG_BF524) := bf524
@@ -54,6 +64,8 @@ cpu-$(CONFIG_BF533) := bf533 
cpu-$(CONFIG_BF534) := bf534

cpu-$(CONFIG_BF536) := bf536

cpu-$(CONFIG_BF537) := bf537

cpu-$(CONFIG_BF538) := bf538

cpu-$(CONFIG_BF539) := bf539

cpu-$(CONFIG_BF542) := bf542

cpu-$(CONFIG_BF544) := bf544

cpu-$(CONFIG_BF547) := bf547
@@ -79,7 +91,7 @@ KBUILD_AFLAGS += -mcpu=$(cpu-y)-$(rev-y) 
CHECKFLAGS_SILICON = $(shell echo "" | $(CPP) $(KBUILD_CFLAGS) -dD - 2>/dev/null | awk '$$2 == "__SILICON_REVISION__" { print $$3 }')

CHECKFLAGS += -D__SILICON_REVISION__=$(CHECKFLAGS_SILICON) -Dl1_text=__used__



head-y   := arch/$(ARCH)/mach-$(MACHINE)/head.o arch/$(ARCH)/kernel/init_task.o

head-y   := arch/$(ARCH)/kernel/init_task.o



core-y   += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/ arch/$(ARCH)/mach-common/
@@ -95,10 +107,10 @@ else 
core-y	+= arch/$(ARCH)/kernel/cplb-nompu/

endif



libs-y   += arch/$(ARCH)/lib/



drivers-$(CONFIG_OPROFILE) += arch/$(ARCH)/oprofile/



libs-y   += arch/$(ARCH)/lib/



machdirs	:= $(patsubst %,arch/blackfin/mach-%/, $(machine-y))



KBUILD_CFLAGS += -Iarch/$(ARCH)/include/