Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 5674124f authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge branch 'x86-syscall-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 

* 'x86-syscall-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Move <asm/asm-offsets.h> from trace_syscalls.c to asm/syscall.h
  x86, um: Fix typo in 32-bit system call modifications
  um: Use $(srctree) not $(KBUILD_SRC)
  x86, um: Mark system call tables readonly
  x86, um: Use the same style generated syscall tables as native
  um: Generate headers before generating user-offsets.s
  um: Run host archheaders, allow use of host generated headers
  kbuild, headers.sh: Don't make archheaders explicitly
  x86, syscall: Allow syscall offset to be symbolic
  x86, syscall: Re-fix typo in comment
  x86: Simplify syscallhdr.sh
  x86: Generate system call tables and unistd_*.h from tables
  checksyscalls: Use arch/x86/syscalls/syscall_32.tbl as source
  x86: Machine-readable syscall tables and scripts to process them
  trace: Include <asm/asm-offsets.h> in trace_syscalls.c
  x86-64, ia32: Move compat_ni_syscall into C and its own file
  x86-64, syscall: Adjust comment spacing and remove typo
  kbuild: Add support for an "archheaders" target
  kbuild: Add support for installing generated asm headers
parents 5d48421b 72142fd4

Documentation/kbuild/makefiles.txt

+32 −18
Original line number Diff line number Diff line
@@ -33,14 +33,15 @@ This document describes the Linux kernel Makefiles. 


	=== 6 Architecture Makefiles

	   --- 6.1 Set variables to tweak the build to the architecture

	   --- 6.2 Add prerequisites to archprepare:

	   --- 6.3 List directories to visit when descending

	   --- 6.4 Architecture-specific boot images

	   --- 6.5 Building non-kbuild targets

	   --- 6.6 Commands useful for building a boot image

	   --- 6.7 Custom kbuild commands

	   --- 6.8 Preprocessing linker scripts

	   --- 6.9 Generic header files

	   --- 6.2 Add prerequisites to archheaders:

	   --- 6.3 Add prerequisites to archprepare:

	   --- 6.4 List directories to visit when descending

	   --- 6.5 Architecture-specific boot images

	   --- 6.6 Building non-kbuild targets

	   --- 6.7 Commands useful for building a boot image

	   --- 6.8 Custom kbuild commands

	   --- 6.9 Preprocessing linker scripts

	   --- 6.10 Generic header files



	=== 7 Kbuild syntax for exported headers

		--- 7.1 header-y
@@ -252,7 +253,7 @@ more details, with real examples. 
	This will create a library lib.a based on delay.o. For kbuild to

	actually recognize that there is a lib.a being built, the directory

	shall be listed in libs-y.

	See also "6.3 List directories to visit when descending".

	See also "6.4 List directories to visit when descending".



	Use of lib-y is normally restricted to lib/ and arch/*/lib.
@@ -974,7 +975,20 @@ When kbuild executes, the following steps are followed (roughly): 
	$(KBUILD_ARFLAGS) set by the top level Makefile to "D" (deterministic

	mode) if this option is supported by $(AR).



--- 6.2 Add prerequisites to archprepare:

--- 6.2 Add prerequisites to archheaders:



	The archheaders: rule is used to generate header files that

	may be installed into user space by "make header_install" or

	"make headers_install_all".  In order to support

	"make headers_install_all", this target has to be able to run

	on an unconfigured tree, or a tree configured for another

	architecture.



	It is run before "make archprepare" when run on the

	architecture itself.





--- 6.3 Add prerequisites to archprepare:



	The archprepare: rule is used to list prerequisites that need to be

	built before starting to descend down in the subdirectories.
@@ -990,7 +1004,7 @@ When kbuild executes, the following steps are followed (roughly): 
	generating offset header files.





--- 6.3 List directories to visit when descending

--- 6.4 List directories to visit when descending



	An arch Makefile cooperates with the top Makefile to define variables

	which specify how to build the vmlinux file.  Note that there is no
@@ -1019,7 +1033,7 @@ When kbuild executes, the following steps are followed (roughly): 
		drivers-$(CONFIG_OPROFILE)  += arch/sparc64/oprofile/





--- 6.4 Architecture-specific boot images

--- 6.5 Architecture-specific boot images



	An arch Makefile specifies goals that take the vmlinux file, compress

	it, wrap it in bootstrapping code, and copy the resulting files
@@ -1070,7 +1084,7 @@ When kbuild executes, the following steps are followed (roughly): 


	When "make" is executed without arguments, bzImage will be built.



--- 6.5 Building non-kbuild targets

--- 6.6 Building non-kbuild targets



    extra-y
@@ -1090,7 +1104,7 @@ When kbuild executes, the following steps are followed (roughly): 
	shall be built, but shall not be linked as part of built-in.o.





--- 6.6 Commands useful for building a boot image

--- 6.7 Commands useful for building a boot image



	Kbuild provides a few macros that are useful when building a

	boot image.
@@ -1112,7 +1126,7 @@ When kbuild executes, the following steps are followed (roughly): 
	always be built.

	Assignments to $(targets) are without $(obj)/ prefix.

	if_changed may be used in conjunction with custom commands as

	defined in 6.7 "Custom kbuild commands".

	defined in 6.8 "Custom kbuild commands".



	Note: It is a typical mistake to forget the FORCE prerequisite.

	Another common pitfall is that whitespace is sometimes
@@ -1171,7 +1185,7 @@ When kbuild executes, the following steps are followed (roughly): 
		$(obj)/%.dtb: $(src)/%.dts

			$(call cmd,dtc)



--- 6.7 Custom kbuild commands

--- 6.8 Custom kbuild commands



	When kbuild is executing with KBUILD_VERBOSE=0, then only a shorthand

	of a command is normally displayed.
@@ -1198,7 +1212,7 @@ When kbuild executes, the following steps are followed (roughly): 
	will be displayed with "make KBUILD_VERBOSE=0".





--- 6.8 Preprocessing linker scripts

--- 6.9 Preprocessing linker scripts



	When the vmlinux image is built, the linker script

	arch/$(ARCH)/kernel/vmlinux.lds is used.
@@ -1228,7 +1242,7 @@ When kbuild executes, the following steps are followed (roughly): 
	The kbuild infrastructure for *lds file are used in several

	architecture-specific files.



--- 6.9 Generic header files

--- 6.10 Generic header files



	The directory include/asm-generic contains the header files

	that may be shared between individual architectures.

Makefile

+6 −3
Original line number Diff line number Diff line
@@ -442,7 +442,7 @@ asm-generic: 


no-dot-config-targets := clean mrproper distclean \

			 cscope gtags TAGS tags help %docs check% coccicheck \

			 include/linux/version.h headers_% \

			 include/linux/version.h headers_% archheaders \

			 kernelversion %src-pkg



config-targets := 0
@@ -979,7 +979,7 @@ prepare1: prepare2 include/linux/version.h include/generated/utsrelease.h \ 
                   include/config/auto.conf

	$(cmd_crmodverdir)



archprepare: prepare1 scripts_basic

archprepare: archheaders prepare1 scripts_basic



prepare0: archprepare FORCE

	$(Q)$(MAKE) $(build)=.
@@ -1046,8 +1046,11 @@ hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj 
# If we do an all arch process set dst to asm-$(hdr-arch)

hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)



PHONY += archheaders

archheaders:



PHONY += __headers

__headers: include/linux/version.h scripts_basic asm-generic FORCE

__headers: include/linux/version.h scripts_basic asm-generic archheaders FORCE

	$(Q)$(MAKE) $(build)=scripts build_unifdef



PHONY += headers_install_all

arch/um/Makefile

+7 −2
Original line number Diff line number Diff line
@@ -64,7 +64,8 @@ USER_CFLAGS = $(patsubst $(KERNEL_DEFINES),,$(patsubst -D__KERNEL__,,\ 
#This will adjust *FLAGS accordingly to the platform.

include $(srctree)/$(ARCH_DIR)/Makefile-os-$(OS)



KBUILD_CPPFLAGS += -I$(srctree)/$(HOST_DIR)/include

KBUILD_CPPFLAGS += -I$(srctree)/$(HOST_DIR)/include \

		   -I$(HOST_DIR)/include/generated



# -Derrno=kernel_errno - This turns all kernel references to errno into

# kernel_errno to separate them from the libc errno.  This allows -fno-common
@@ -96,6 +97,10 @@ endef 


KBUILD_KCONFIG := $(HOST_DIR)/um/Kconfig



archheaders:

	$(Q)$(MAKE) -C '$(srctree)' KBUILD_SRC= \

		ARCH=$(SUBARCH) O='$(objtree)' archheaders



archprepare: include/generated/user_constants.h



LINK-$(CONFIG_LD_SCRIPT_STATIC) += -static
@@ -135,7 +140,7 @@ archclean: 


# Generated files



$(HOST_DIR)/um/user-offsets.s: FORCE

$(HOST_DIR)/um/user-offsets.s: __headers FORCE

	$(Q)$(MAKE) $(build)=$(HOST_DIR)/um $@



define filechk_gen-asm-offsets

arch/x86/Makefile

+6 −0
Original line number Diff line number Diff line
@@ -117,6 +117,12 @@ KBUILD_CFLAGS += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,) 
KBUILD_CFLAGS += $(mflags-y)

KBUILD_AFLAGS += $(mflags-y)



###

# Syscall table generation



archheaders:

	$(Q)$(MAKE) $(build)=arch/x86/syscalls all



###

# Kernel objects

arch/x86/ia32/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -3,6 +3,7 @@ 
#



obj-$(CONFIG_IA32_EMULATION) := ia32entry.o sys_ia32.o ia32_signal.o

obj-$(CONFIG_IA32_EMULATION) += nosyscall.o syscall_ia32.o



sysv-$(CONFIG_SYSVIPC) := ipc32.o

obj-$(CONFIG_IA32_EMULATION) += $(sysv-y)