[ARM] Kirkwood: Marvell SheevaPlug support (4640fa60) · Commits · e / devices / android_kernel_teracube_2e

arch/arm/mach-kirkwood/Kconfig

+6 −0

Original line number	Diff line number	Diff line
		@@ -20,6 +20,12 @@ config MACH_RD88F6281
		Say 'Y' here if you want your kernel to support the
		Marvell RD-88F6281 Reference Board.

		config MACH_SHEEVAPLUG
		bool "Marvell SheevaPlug Reference Board"
		help
		Say 'Y' here if you want your kernel to support the
		Marvell SheevaPlug Reference Board.

		endmenu

		endif

arch/arm/mach-kirkwood/Makefile

+1 −0

Original line number	Diff line number	Diff line
		@@ -3,3 +3,4 @@ obj-y += common.o addr-map.o irq.o pcie.o mpp.o
		obj-$(CONFIG_MACH_DB88F6281_BP) += db88f6281-bp-setup.o
		obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o
		obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
		obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o

arch/arm/mach-kirkwood/sheevaplug-setup.c

0 → 100644

+98 −0

Original line number	Diff line number	Diff line
		/*
		* arch/arm/mach-kirkwood/sheevaplug-setup.c
		*
		* Marvell SheevaPlug Reference Board Setup
		*
		* This file is licensed under the terms of the GNU General Public
		* License version 2. This program is licensed "as is" without any
		* warranty of any kind, whether express or implied.
		*/

		#include <linux/kernel.h>
		#include <linux/init.h>
		#include <linux/platform_device.h>
		#include <linux/mtd/nand.h>
		#include <linux/mtd/partitions.h>
		#include <linux/mv643xx_eth.h>
		#include <asm/mach-types.h>
		#include <asm/mach/arch.h>
		#include <mach/kirkwood.h>
		#include <plat/mvsdio.h>
		#include <plat/orion_nand.h>
		#include "common.h"

		static struct mtd_partition sheevaplug_nand_parts[] = {
		{
		.name = "u-boot",
		.offset = 0,
		.size = SZ_1M
		}, {
		.name = "uImage",
		.offset = MTDPART_OFS_NXTBLK,
		.size = SZ_4M
		}, {
		.name = "root",
		.offset = MTDPART_OFS_NXTBLK,
		.size = MTDPART_SIZ_FULL
		},
		};

		static struct resource sheevaplug_nand_resource = {
		.flags = IORESOURCE_MEM,
		.start = KIRKWOOD_NAND_MEM_PHYS_BASE,
		.end = KIRKWOOD_NAND_MEM_PHYS_BASE +
		KIRKWOOD_NAND_MEM_SIZE - 1,
		};

		static struct orion_nand_data sheevaplug_nand_data = {
		.parts = sheevaplug_nand_parts,
		.nr_parts = ARRAY_SIZE(sheevaplug_nand_parts),
		.cle = 0,
		.ale = 1,
		.width = 8,
		.chip_delay = 25,
		};

		static struct platform_device sheevaplug_nand_flash = {
		.name = "orion_nand",
		.id = -1,
		.dev = {
		.platform_data = &sheevaplug_nand_data,
		},
		.resource = &sheevaplug_nand_resource,
		.num_resources = 1,
		};

		static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
		.phy_addr = MV643XX_ETH_PHY_ADDR(0),
		};

		static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
		// unfortunately the CD signal has not been connected */
		};

		static void __init sheevaplug_init(void)
		{
		/*
		* Basic setup. Needs to be called early.
		*/
		kirkwood_init();

		kirkwood_uart0_init();
		kirkwood_ehci_init();
		kirkwood_ge00_init(&sheevaplug_ge00_data);
		kirkwood_sdio_init(&sheevaplug_mvsdio_data);

		platform_device_register(&sheevaplug_nand_flash);
		}

		MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
		/* Maintainer: shadi Ammouri <shadi@marvell.com> */
		.phys_io = KIRKWOOD_REGS_PHYS_BASE,
		.io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
		.boot_params = 0x00000100,
		.init_machine = sheevaplug_init,
		.map_io = kirkwood_map_io,
		.init_irq = kirkwood_init_irq,
		.timer = &kirkwood_timer,
		MACHINE_END