[MIPS] WRPPMC serial support move to platform device (2c4d1357) · Commits · e / devices / android_kernel_teracube_2e

arch/mips/gt64120/wrppmc/Makefile

+1 −1

Original line number	Diff line number	Diff line
		@@ -9,6 +9,6 @@
		# Makefile for the Wind River MIPS 4KC PPMC Eval Board
		#

		obj-y += irq.o reset.o setup.o time.o pci.o
		obj-y += irq.o pci.o reset.o serial.o setup.o time.o

		EXTRA_CFLAGS += -Werror

arch/mips/gt64120/wrppmc/serial.c

0 → 100644

+80 −0

Original line number	Diff line number	Diff line
		/*
		* Registration of WRPPMC UART platform device.
		*
		* Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License as published by
		* the Free Software Foundation; either version 2 of the License, or
		* (at your option) any later version.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*
		* You should have received a copy of the GNU General Public License
		* along with this program; if not, write to the Free Software
		* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
		*/
		#include <linux/errno.h>
		#include <linux/init.h>
		#include <linux/ioport.h>
		#include <linux/platform_device.h>
		#include <linux/serial_8250.h>

		#include <asm/gt64120.h>

		static struct resource wrppmc_uart_resource[] __initdata = {
		{
		.start = WRPPMC_UART16550_BASE,
		.end = WRPPMC_UART16550_BASE + 7,
		.flags = IORESOURCE_MEM,
		},
		{
		.start = WRPPMC_UART16550_IRQ,
		.end = WRPPMC_UART16550_IRQ,
		.flags = IORESOURCE_IRQ,
		},
		};

		static struct plat_serial8250_port wrppmc_serial8250_port[] = {
		{
		.irq = WRPPMC_UART16550_IRQ,
		.uartclk = WRPPMC_UART16550_CLOCK,
		.iotype = UPIO_MEM,
		.flags = UPF_IOREMAP \| UPF_SKIP_TEST,
		.mapbase = WRPPMC_UART16550_BASE,
		},
		{},
		};

		static __init int wrppmc_uart_add(void)
		{
		struct platform_device *pdev;
		int retval;

		pdev = platform_device_alloc("serial8250", -1);
		if (!pdev)
		return -ENOMEM;

		pdev->id = PLAT8250_DEV_PLATFORM;
		pdev->dev.platform_data = wrppmc_serial8250_port;

		retval = platform_device_add_resources(pdev, wrppmc_uart_resource,
		ARRAY_SIZE(wrppmc_uart_resource));
		if (retval)
		goto err_free_device;

		retval = platform_device_add(pdev);
		if (retval)
		goto err_free_device;

		return 0;

		err_free_device:
		platform_device_put(pdev);

		return retval;
		}
		device_initcall(wrppmc_uart_add);

arch/mips/gt64120/wrppmc/setup.c

+0 −34

Original line number	Diff line number	Diff line
		@@ -11,10 +11,6 @@
		#include <linux/init.h>
		#include <linux/string.h>
		#include <linux/kernel.h>
		#include <linux/tty.h>
		#include <linux/serial.h>
		#include <linux/serial_core.h>
		#include <linux/serial_8250.h>
		#include <linux/pm.h>

		#include <asm/io.h>
		@@ -98,32 +94,6 @@ void __init prom_free_prom_memory(void)
		{
		}

		#ifdef CONFIG_SERIAL_8250
		static void wrppmc_setup_serial(void)
		{
		struct uart_port up;

		memset(&up, 0x00, sizeof(struct uart_port));

		/*
		* A note about mapbase/membase
		* -) mapbase is the physical address of the IO port.
		* -) membase is an 'ioremapped' cookie.
		*/
		up.line = 0;
		up.type = PORT_16550;
		up.iotype = UPIO_MEM;
		up.mapbase = WRPPMC_UART16550_BASE;
		up.membase = ioremap(up.mapbase, 8);
		up.irq = WRPPMC_UART16550_IRQ;
		up.uartclk = WRPPMC_UART16550_CLOCK;
		up.flags = UPF_SKIP_TEST/* \| UPF_BOOT_AUTOCONF */;
		up.regshift = 0;

		early_serial_setup(&up);
		}
		#endif

		void __init plat_mem_setup(void)
		{
		extern void wrppmc_machine_restart(char *command);
		@@ -138,10 +108,6 @@ void __init plat_mem_setup(void)
		* physical address ( < KSEG0) can work via KSEG1
		*/
		set_io_port_base(KSEG1);

		#ifdef CONFIG_SERIAL_8250
		wrppmc_setup_serial();
		#endif
		}

		const char *get_system_type(void)