Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 2950219d authored by Yuval Mintz's avatar Yuval Mintz Committed by David S. Miller
Browse files

qede: Add basic network device support



This patch includes the basic Rx/Tx support for the driver [although
carrier will still never be turned on].
Following this patch the driver registers a network device, initializes
it and prepares it for traffic.

Signed-off-by: default avatarSudarsana Kalluru <Sudarsana.Kalluru@qlogic.com>
Signed-off-by: default avatarYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: default avatarAriel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent cee4d264
Loading
Loading
Loading
Loading
+128 −0
Original line number Diff line number Diff line
@@ -51,6 +51,7 @@ struct qede_dev {
#define QEDE_MAX_TSS_CNT(edev)	((edev)->dev_info.num_queues * \
				 (edev)->dev_info.num_tc)

	struct qede_fastpath		*fp_array;
	u16				num_rss;
	u8				num_tc;
#define QEDE_RSS_CNT(edev)		((edev)->num_rss)
@@ -58,6 +59,9 @@ struct qede_dev {
					 (edev)->num_tc)
#define QEDE_TSS_IDX(edev, txqidx)	((txqidx) % (edev)->num_rss)
#define QEDE_TC_IDX(edev, txqidx)	((txqidx) / (edev)->num_rss)
#define QEDE_TX_QUEUE(edev, txqidx)	\
	(&(edev)->fp_array[QEDE_TSS_IDX((edev), (txqidx))].txqs[QEDE_TC_IDX( \
							(edev), (txqidx))])

	struct qed_int_info		int_info;
	unsigned char			primary_mac[ETH_ALEN];
@@ -65,9 +69,133 @@ struct qede_dev {
	/* Smaller private varaiant of the RTNL lock */
	struct mutex			qede_lock;
	u32				state; /* Protected by qede_lock */
	u16				rx_buf_size;
	/* L2 header size + 2*VLANs (8 bytes) + LLC SNAP (8 bytes) */
#define ETH_OVERHEAD			(ETH_HLEN + 8 + 8)
	/* Max supported alignment is 256 (8 shift)
	 * minimal alignment shift 6 is optimal for 57xxx HW performance
	 */
#define QEDE_RX_ALIGN_SHIFT		max(6, min(8, L1_CACHE_SHIFT))
	/* We assume skb_build() uses sizeof(struct skb_shared_info) bytes
	 * at the end of skb->data, to avoid wasting a full cache line.
	 * This reduces memory use (skb->truesize).
	 */
#define QEDE_FW_RX_ALIGN_END					\
	max_t(u64, 1UL << QEDE_RX_ALIGN_SHIFT,			\
	      SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))

	struct qed_update_vport_rss_params	rss_params;
	u16			q_num_rx_buffers; /* Must be a power of two */
	u16			q_num_tx_buffers; /* Must be a power of two */
};

enum QEDE_STATE {
	QEDE_STATE_CLOSED,
	QEDE_STATE_OPEN,
};

#define HILO_U64(hi, lo)		((((u64)(hi)) << 32) + (lo))

#define	MAX_NUM_TC	8
#define	MAX_NUM_PRI	8

/* The driver supports the new build_skb() API:
 * RX ring buffer contains pointer to kmalloc() data only,
 * skb are built only after the frame was DMA-ed.
 */
struct sw_rx_data {
	u8 *data;

	DEFINE_DMA_UNMAP_ADDR(mapping);
};

struct qede_rx_queue {
	__le16			*hw_cons_ptr;
	struct sw_rx_data	*sw_rx_ring;
	u16			sw_rx_cons;
	u16			sw_rx_prod;
	struct qed_chain	rx_bd_ring;
	struct qed_chain	rx_comp_ring;
	void __iomem		*hw_rxq_prod_addr;

	int			rx_buf_size;

	u16			num_rx_buffers;
	u16			rxq_id;

	u64			rx_hw_errors;
	u64			rx_alloc_errors;
};

union db_prod {
	struct eth_db_data data;
	u32		raw;
};

struct sw_tx_bd {
	struct sk_buff *skb;
	u8 flags;
/* Set on the first BD descriptor when there is a split BD */
#define QEDE_TSO_SPLIT_BD		BIT(0)
};

struct qede_tx_queue {
	int			index; /* Queue index */
	__le16			*hw_cons_ptr;
	struct sw_tx_bd		*sw_tx_ring;
	u16			sw_tx_cons;
	u16			sw_tx_prod;
	struct qed_chain	tx_pbl;
	void __iomem		*doorbell_addr;
	union db_prod		tx_db;

	u16			num_tx_buffers;
};

#define BD_UNMAP_ADDR(bd)		HILO_U64(le32_to_cpu((bd)->addr.hi), \
						 le32_to_cpu((bd)->addr.lo))
#define BD_SET_UNMAP_ADDR_LEN(bd, maddr, len)				\
	do {								\
		(bd)->addr.hi = cpu_to_le32(upper_32_bits(maddr));	\
		(bd)->addr.lo = cpu_to_le32(lower_32_bits(maddr));	\
		(bd)->nbytes = cpu_to_le16(len);			\
	} while (0)
#define BD_UNMAP_LEN(bd)		(le16_to_cpu((bd)->nbytes))

struct qede_fastpath {
	struct qede_dev	*edev;
	u8			rss_id;
	struct napi_struct	napi;
	struct qed_sb_info	*sb_info;
	struct qede_rx_queue	*rxq;
	struct qede_tx_queue	*txqs;

#define VEC_NAME_SIZE	(sizeof(((struct net_device *)0)->name) + 8)
	char	name[VEC_NAME_SIZE];
};

/* Debug print definitions */
#define DP_NAME(edev) ((edev)->ndev->name)

#define XMIT_PLAIN		0
#define XMIT_L4_CSUM		BIT(0)
#define XMIT_LSO		BIT(1)
#define XMIT_ENC		BIT(2)

#define QEDE_CSUM_ERROR			BIT(0)
#define QEDE_CSUM_UNNECESSARY		BIT(1)
#define RX_RING_SIZE_POW	13
#define RX_RING_SIZE		BIT(RX_RING_SIZE_POW)
#define NUM_RX_BDS_MAX		(RX_RING_SIZE - 1)
#define NUM_RX_BDS_MIN		128
#define NUM_RX_BDS_DEF		NUM_RX_BDS_MAX

#define TX_RING_SIZE_POW	13
#define TX_RING_SIZE		BIT(TX_RING_SIZE_POW)
#define NUM_TX_BDS_MAX		(TX_RING_SIZE - 1)
#define NUM_TX_BDS_MIN		128
#define NUM_TX_BDS_DEF		NUM_TX_BDS_MAX

#define	for_each_rss(i) for (i = 0; i < edev->num_rss; i++)

#endif /* _QEDE_H_ */
+1807 −0

File changed.

Preview size limit exceeded, changes collapsed.