Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 241a9871 authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files

Merge branch 'exynos/pwm-clocksource' into late/multiplatform 



This series from Tomasz Figa restores support for the pwm clocksource
in Exynos, which was broken during the conversion of the platform
to the common clk framework. The clocksource is only used in one
board in the mainline kernel (universal_c210), and this makes it
work for DT based probing as well as restoring the non-DT based
case.

* exynos/pwm-clocksource:
  ARM: dts: exynops4210: really add universal_c210 dts
  ARM: dts: exynos4210: Add basic dts file for universal_c210 board
  ARM: dts: exynos4: Add node for PWM device
  ARM: SAMSUNG: Do not register legacy timer interrupts on Exynos
  clocksource: samsung_pwm_timer: Work around rounding errors in clockevents core
  clocksource: samsung_pwm_timer: Correct programming of clock events
  clocksource: samsung_pwm_timer: Use proper clockevents max_delta
  clocksource: samsung_pwm_timer: Add support for non-DT platforms
  clocksource: samsung_pwm_timer: Drop unused samsung_pwm struct
  clocksource: samsung_pwm_timer: Keep all driver data in a structure
  clocksource: samsung_pwm_timer: Make PWM spinlock global
  clocksource: samsung_pwm_timer: Let platforms select the driver
  Documentation: Add device tree bindings for Samsung PWM timers
  clocksource: add samsung pwm timer driver

Conflicts:
	arch/arm/boot/dts/Makefile
	arch/arm/mach-exynos/common.c
	drivers/clocksource/Kconfig
	drivers/clocksource/Makefile

Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents 2254c36d 0682edaa

Documentation/devicetree/bindings/pwm/pwm-samsung.txt

0 → 100644
+43 −0
Original line number Diff line number Diff line 
* Samsung PWM timers



Samsung SoCs contain PWM timer blocks which can be used for system clock source

and clock event timers, as well as to drive SoC outputs with PWM signal. Each

PWM timer block provides 5 PWM channels (not all of them can drive physical

outputs - see SoC and board manual).



Be aware that the clocksource driver supports only uniprocessor systems.



Required properties:

- compatible : should be one of following:

    samsung,s3c2410-pwm - for 16-bit timers present on S3C24xx SoCs

    samsung,s3c6400-pwm - for 32-bit timers present on S3C64xx SoCs

    samsung,s5p6440-pwm - for 32-bit timers present on S5P64x0 SoCs

    samsung,s5pc100-pwm - for 32-bit timers present on S5PC100, S5PV210,

			  Exynos4210 rev0 SoCs

    samsung,exynos4210-pwm - for 32-bit timers present on Exynos4210,

                          Exynos4x12 and Exynos5250 SoCs

- reg: base address and size of register area

- interrupts: list of timer interrupts (one interrupt per timer, starting at

  timer 0)

- #pwm-cells: number of cells used for PWM specifier - must be 3

   the specifier format is as follows:

     - phandle to PWM controller node

     - index of PWM channel (from 0 to 4)

     - PWM signal period in nanoseconds

     - bitmask of optional PWM flags:

        0x1 - invert PWM signal



Optional properties:

- samsung,pwm-outputs: list of PWM channels used as PWM outputs on particular

    platform - an array of up to 5 elements being indices of PWM channels

    (from 0 to 4), the order does not matter.



Example:

	pwm@7f006000 {

		compatible = "samsung,s3c6400-pwm";

		reg = <0x7f006000 0x1000>;

		interrupt-parent = <&vic0>;

		interrupts = <23>, <24>, <25>, <27>, <28>;

		samsung,pwm-outputs = <0>, <1>;

		#pwm-cells = <3>;

	}

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -42,6 +42,7 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ 
dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \

	exynos4210-smdkv310.dtb \

	exynos4210-trats.dtb \

	exynos4210-universal_c210.dtb \

	exynos4412-odroidx.dtb \

	exynos4412-smdk4412.dtb \

	exynos4412-origen.dtb \

arch/arm/boot/dts/exynos4.dtsi

+8 −0
Original line number Diff line number Diff line
@@ -316,6 +316,14 @@ 
		status = "disabled";

	};



	pwm@139D0000 {

		compatible = "samsung,exynos4210-pwm";

		reg = <0x139D0000 0x1000>;

		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;

		#pwm-cells = <2>;

		status = "disabled";

	};



	amba {

		#address-cells = <1>;

		#size-cells = <1>;

arch/arm/boot/dts/exynos4210-universal_c210.dts

0 → 100644
+352 −0
Original line number Diff line number Diff line 
/*

 * Samsung's Exynos4210 based Universal C210 board device tree source

 *

 * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.

 *		http://www.samsung.com

 *

 * Device tree source file for Samsung's Universal C210 board which is based on

 * Samsung's Exynos4210 rev0 SoC.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

*/



/dts-v1/;

/include/ "exynos4210.dtsi"



/ {

	model = "Samsung Universal C210 based on Exynos4210 rev0";

	compatible = "samsung,universal_c210", "samsung,exynos4210";



	memory {

		reg =  <0x40000000 0x10000000

			0x50000000 0x10000000>;

	};



	chosen {

		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";

	};



	mct@10050000 {

		compatible = "none";

	};



	fixed-rate-clocks {

		xxti {

			compatible = "samsung,clock-xxti";

			clock-frequency = <0>;

		};



		xusbxti {

			compatible = "samsung,clock-xusbxti";

			clock-frequency = <24000000>;

		};

	};



	vemmc_reg: voltage-regulator {

	        compatible = "regulator-fixed";

		regulator-name = "VMEM_VDD_2_8V";

		regulator-min-microvolt = <2800000>;

		regulator-max-microvolt = <2800000>;

		gpio = <&gpe1 3 0>;

		enable-active-high;

	};



	sdhci_emmc: sdhci@12510000 {

		bus-width = <8>;

		non-removable;

		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;

		pinctrl-names = "default";

		vmmc-supply = <&vemmc_reg>;

		status = "okay";

	};



	serial@13800000 {

		status = "okay";

	};



	serial@13810000 {

		status = "okay";

	};



	serial@13820000 {

		status = "okay";

	};



	serial@13830000 {

		status = "okay";

	};



	gpio-keys {

		compatible = "gpio-keys";



		vol-up-key {

			gpios = <&gpx2 0 1>;

			linux,code = <115>;

			label = "volume up";

			debounce-interval = <1>;

		};



		vol-down-key {

			gpios = <&gpx2 1 1>;

			linux,code = <114>;

			label = "volume down";

			debounce-interval = <1>;

		};



		config-key {

			gpios = <&gpx2 2 1>;

			linux,code = <171>;

			label = "config";

			debounce-interval = <1>;

			gpio-key,wakeup;

		};



		camera-key {

			gpios = <&gpx2 3 1>;

			linux,code = <212>;

			label = "camera";

			debounce-interval = <1>;

		};



		power-key {

			gpios = <&gpx2 7 1>;

			linux,code = <116>;

			label = "power";

			debounce-interval = <1>;

			gpio-key,wakeup;

		};



		ok-key {

			gpios = <&gpx3 5 1>;

			linux,code = <352>;

			label = "ok";

			debounce-interval = <1>;

		};

	};



	tsp_reg: voltage-regulator {

	        compatible = "regulator-fixed";

		regulator-name = "TSP_2_8V";

		regulator-min-microvolt = <2800000>;

		regulator-max-microvolt = <2800000>;

		gpio = <&gpe2 3 0>;

		enable-active-high;

	};



	i2c@13890000 {

		samsung,i2c-sda-delay = <100>;

		samsung,i2c-slave-addr = <0x10>;

		samsung,i2c-max-bus-freq = <100000>;

		pinctrl-0 = <&i2c3_bus>;

		pinctrl-names = "default";

		status = "okay";



		tsp@4a {

			/* TBD: Atmel maXtouch touchscreen */

			reg = <0x4a>;

		};

	};



	i2c@138B0000 {

		samsung,i2c-sda-delay = <100>;

		samsung,i2c-slave-addr = <0x10>;

		samsung,i2c-max-bus-freq = <100000>;

		pinctrl-0 = <&i2c5_bus>;

		pinctrl-names = "default";

		status = "okay";



		vdd_arm_reg: pmic@60 {

			compatible = "maxim,max8952";

			reg = <0x60>;



			max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>;

			max8952,default-mode = <0>;

			max8952,dvs-mode-microvolt = <1250000>, <1200000>,

							<1050000>, <950000>;

			max8952,sync-freq = <0>;

			max8952,ramp-speed = <0>;



			regulator-name = "vdd_arm";

			regulator-min-microvolt = <770000>;

			regulator-max-microvolt = <1400000>;

			regulator-always-on;

			regulator-boot-on;

		};



		pmic@66 {

			compatible = "national,lp3974";

			reg = <0x66>;



			max8998,pmic-buck1-default-dvs-idx = <0>;

			max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>,

							<&gpx0 6 0>;

			max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,

							<1100000>, <1000000>;



			max8998,pmic-buck2-default-dvs-idx = <0>;

			max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>;

			max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;



			regulators {

				ldo2_reg: LDO2 {

					regulator-name = "VALIVE_1.2V";

					regulator-min-microvolt = <1200000>;

					regulator-max-microvolt = <1200000>;

					regulator-always-on;

				};



				ldo3_reg: LDO3 {

					regulator-name = "VUSB+MIPI_1.1V";

					regulator-min-microvolt = <1100000>;

					regulator-max-microvolt = <1100000>;

				};



				ldo4_reg: LDO4 {

					regulator-name = "VADC_3.3V";

					regulator-min-microvolt = <3300000>;

					regulator-max-microvolt = <3300000>;

				};



				ldo5_reg: LDO5 {

					regulator-name = "VTF_2.8V";

					regulator-min-microvolt = <2800000>;

					regulator-max-microvolt = <2800000>;

				};



				ldo6_reg: LDO6 {

					regulator-name = "LDO6";

					regulator-min-microvolt = <2000000>;

					regulator-max-microvolt = <2000000>;

				};



				ldo7_reg: LDO7 {

					regulator-name = "VLCD+VMIPI_1.8V";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

				};



				ldo8_reg: LDO8 {

					regulator-name = "VUSB+VDAC_3.3V";

					regulator-min-microvolt = <3300000>;

					regulator-max-microvolt = <3300000>;

				};



				ldo9_reg: LDO9 {

					regulator-name = "VCC_2.8V";

					regulator-min-microvolt = <2800000>;

					regulator-max-microvolt = <2800000>;

					regulator-always-on;

				};



				ldo10_reg: LDO10 {

					regulator-name = "VPLL_1.1V";

					regulator-min-microvolt = <1100000>;

					regulator-max-microvolt = <1100000>;

					regulator-boot-on;

					regulator-always-on;

				};



				ldo11_reg: LDO11 {

					regulator-name = "CAM_AF_3.3V";

					regulator-min-microvolt = <3300000>;

					regulator-max-microvolt = <3300000>;

				};



				ldo12_reg: LDO12 {

					regulator-name = "PS_2.8V";

					regulator-min-microvolt = <2800000>;

					regulator-max-microvolt = <2800000>;

				};



				ldo13_reg: LDO13 {

					regulator-name = "VHIC_1.2V";

					regulator-min-microvolt = <1200000>;

					regulator-max-microvolt = <1200000>;

				};



				ldo14_reg: LDO14 {

					regulator-name = "CAM_I_HOST_1.8V";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

				};



				ldo15_reg: LDO15 {

					regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";

					regulator-min-microvolt = <1200000>;

					regulator-max-microvolt = <1200000>;

				};



				ldo16_reg: LDO16 {

					regulator-name = "CAM_S_ANA_2.8V";

					regulator-min-microvolt = <2800000>;

					regulator-max-microvolt = <2800000>;

				};



				ldo17_reg: LDO17 {

					regulator-name = "VCC_3.0V_LCD";

					regulator-min-microvolt = <3000000>;

					regulator-max-microvolt = <3000000>;

				};



				buck1_reg: BUCK1 {

					regulator-name = "VINT_1.1V";

					regulator-min-microvolt = <750000>;

					regulator-max-microvolt = <1500000>;

					regulator-boot-on;

					regulator-always-on;

				};



				buck2_reg: BUCK2 {

					regulator-name = "VG3D_1.1V";

					regulator-min-microvolt = <750000>;

					regulator-max-microvolt = <1500000>;

					regulator-boot-on;

				};



				buck3_reg: BUCK3 {

					regulator-name = "VCC_1.8V";

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					regulator-always-on;

				};



				buck4_reg: BUCK4 {

					regulator-name = "VMEM_1.2V";

					regulator-min-microvolt = <1200000>;

					regulator-max-microvolt = <1200000>;

					regulator-always-on;

				};



				ap32khz_reg: EN32KHz-AP {

					regulator-name = "32KHz AP";

					regulator-always-on;

				};



				cp32khz_reg: EN32KHz-CP {

					regulator-name = "32KHz CP";

				};



				vichg_reg: ENVICHG {

					regulator-name = "VICHG";

				};



				safeout1_reg: ESAFEOUT1 {

					regulator-name = "SAFEOUT1";

					regulator-always-on;

				};



				safeout2_reg: ESAFEOUT2 {

					regulator-name = "SAFEOUT2";

					regulator-boot-on;

				};

			};

		};

	};



	pwm@139D0000 {

		compatible = "samsung,s5p6440-pwm";

		status = "okay";

	};

};

arch/arm/mach-exynos/common.c

+0 −15
Original line number Diff line number Diff line
@@ -449,13 +449,6 @@ void __init exynos4_init_irq(void) 
	if (!of_have_populated_dt())

		combiner_init(S5P_VA_COMBINER_BASE, NULL,

			      max_combiner_nr(), COMBINER_IRQ(0, 0));



	/*

	 * The parameters of s5p_init_irq() are for VIC init.

	 * Theses parameters should be NULL and 0 because EXYNOS4

	 * uses GIC instead of VIC.

	 */

	s5p_init_irq(NULL, 0);

}



void __init exynos5_init_irq(void)
@@ -463,14 +456,6 @@ void __init exynos5_init_irq(void) 
#ifdef CONFIG_OF

	irqchip_init();

#endif

	/*

	 * The parameters of s5p_init_irq() are for VIC init.

	 * Theses parameters should be NULL and 0 because EXYNOS4

	 * uses GIC instead of VIC.

	 */

	if (!of_machine_is_compatible("samsung,exynos5440"))

		s5p_init_irq(NULL, 0);



	gic_arch_extn.irq_set_wake = s3c_irq_wake;

}