Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 22a5aa17 authored by Felipe Balbi's avatar Felipe Balbi
Browse files

usb: dwc3: core: switch to snps,dwc3 



all other drivers using Synopsys IPs with DT
have a compatible of snps,$driver, in order
to add consistency, we are switching over to
snps,dwc3 but keeping synopsys,dwc3 in the core
driver to maintain backwards compatibility.

New DTS bindings should NOT use synopsys,dwc3.

Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent f7e846f0

Documentation/devicetree/bindings/usb/dwc3.txt

+2 −2
Original line number Diff line number Diff line
@@ -3,7 +3,7 @@ synopsys DWC3 CORE 
DWC3- USB3 CONTROLLER



Required properties:

 - compatible: must be "synopsys,dwc3"

 - compatible: must be "snps,dwc3"

 - reg : Address and length of the register set for the device

 - interrupts: Interrupts used by the dwc3 controller.

 - usb-phy : array of phandle for the PHY device
@@ -14,7 +14,7 @@ Optional properties: 
This is usually a subnode to DWC3 glue to which it is connected.



dwc3@4a030000 {

	compatible = "synopsys,dwc3";

	compatible = "snps,dwc3";

	reg = <0x4a030000 0xcfff>;

	interrupts = <0 92 4>

	usb-phy = <&usb2_phy>, <&usb3,phy>;

arch/arm/boot/dts/omap5.dtsi

+1 −1
Original line number Diff line number Diff line
@@ -644,7 +644,7 @@ 
			utmi-mode = <2>;

			ranges;

			dwc3@4a030000 {

				compatible = "synopsys,dwc3";

				compatible = "snps,dwc3";

				reg = <0x4a030000 0x1000>;

				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;

				usb-phy = <&usb2_phy>, <&usb3_phy>;

drivers/usb/dwc3/core.c

+3 −0
Original line number Diff line number Diff line
@@ -734,6 +734,9 @@ static const struct dev_pm_ops dwc3_dev_pm_ops = { 


#ifdef CONFIG_OF

static const struct of_device_id of_dwc3_match[] = {

	{

		.compatible = "snps,dwc3"

	},

	{

		.compatible = "synopsys,dwc3"

	},