Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 20906ece authored by Scott Wood's avatar Scott Wood Committed by Kumar Gala
Browse files

[POWERPC] 8xx: mpc885ads cleanup 



It now uses the new CPM binding and the generic pin/clock functions, and
has assorted fixes and cleanup.

Signed-off-by: default avatarScott Wood <scottwood@freescale.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent 96fca1de

arch/powerpc/boot/dts/mpc885ads.dts

+114 −81
Original line number Diff line number Diff line
@@ -2,6 +2,7 @@ 
 * MPC885 ADS Device Tree Source

 *

 * Copyright 2006 MontaVista Software, Inc.

 * Copyright 2007 Freescale Semiconductor, Inc.

 *

 * This program is free software; you can redistribute  it and/or modify it

 * under  the terms of  the GNU General  Public License as published by the
@@ -12,7 +13,7 @@ 


/ {

	model = "MPC885ADS";

	compatible = "mpc8xx";

	compatible = "fsl,mpc885ads";

	#address-cells = <1>;

	#size-cells = <1>;
@@ -23,156 +24,188 @@ 
		PowerPC,885@0 {

			device_type = "cpu";

			reg = <0>;

			d-cache-line-size = <20>;	// 32 bytes

			i-cache-line-size = <20>;	// 32 bytes

			d-cache-size = <2000>;		// L1, 8K

			i-cache-size = <2000>;		// L1, 8K

			d-cache-line-size = <d#16>;

			i-cache-line-size = <d#16>;

			d-cache-size = <d#8192>;

			i-cache-size = <d#8192>;

			timebase-frequency = <0>;

			bus-frequency = <0>;

			clock-frequency = <0>;

			interrupts = <f 2>;	// decrementer interrupt

			interrupt-parent = <&Mpc8xx_pic>;

			interrupt-parent = <&PIC>;

		};

	};



	memory {

		device_type = "memory";

		reg = <00000000 800000>;

		reg = <0 0>;

	};



	soc885@ff000000 {

	localbus@ff000100 {

		compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus";

		#address-cells = <2>;

		#size-cells = <1>;

		reg = <ff000100 40>;



		ranges = <

			0 0 fe000000 00800000

			1 0 ff080000 00008000

			5 0 ff0a0000 00008000

		>;



		flash@0,0 {

			compatible = "jedec-flash";

			reg = <0 0 800000>;

			bank-width = <4>;

			device-width = <1>;

		};



		board-control@1,0 {

			reg = <1 0 20 5 300 4>;

			compatible = "fsl,mpc885ads-bcsr";

		};

	};



	soc@ff000000 {

		compatible = "fsl,mpc885", "fsl,pq1-soc";

		#address-cells = <1>;

		#size-cells = <1>;

		device_type = "soc";

		ranges = <0 ff000000 00100000>;

		reg = <ff000000 00000200>;

		ranges = <0 ff000000 00004000>;

		bus-frequency = <0>;

		mdio@e80 {

			device_type = "mdio";

			compatible = "fs_enet";

			reg = <e80 8>;



		// Temporary -- will go away once kernel uses ranges for get_immrbase().

		reg = <ff000000 4000>;



		mdio@e00 {

			compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio";

			reg = <e00 188>;

			#address-cells = <1>;

			#size-cells = <0>;

			Phy0: ethernet-phy@0 {



			PHY0: ethernet-phy@0 {

				reg = <0>;

				device_type = "ethernet-phy";

			};

			Phy1: ethernet-phy@1 {



			PHY1: ethernet-phy@1 {

				reg = <1>;

				device_type = "ethernet-phy";

			};

			Phy2: ethernet-phy@2 {



			PHY2: ethernet-phy@2 {

				reg = <2>;

				device_type = "ethernet-phy";

			};

		};



		fec@e00 {

		ethernet@e00 {

			device_type = "network";

			compatible = "fs_enet";

			model = "FEC";

			device-id = <1>;

			compatible = "fsl,mpc885-fec-enet",

			             "fsl,pq1-fec-enet";

			reg = <e00 188>;

			mac-address = [ 00 00 0C 00 01 FD ];

			local-mac-address = [ 00 00 00 00 00 00 ];

			interrupts = <3 1>;

			interrupt-parent = <&Mpc8xx_pic>;

			phy-handle = <&Phy1>;

			interrupt-parent = <&PIC>;

			phy-handle = <&PHY0>;

			linux,network-index = <0>;

		};



		fec@1e00 {

		ethernet@1e00 {

			device_type = "network";

			compatible = "fs_enet";

			model = "FEC";

			device-id = <2>;

			compatible = "fsl,mpc885-fec-enet",

			             "fsl,pq1-fec-enet";

			reg = <1e00 188>;

			mac-address = [ 00 00 0C 00 02 FD ];

			local-mac-address = [ 00 00 00 00 00 00 ];

			interrupts = <7 1>;

			interrupt-parent = <&Mpc8xx_pic>;

			phy-handle = <&Phy2>;

			interrupt-parent = <&PIC>;

			phy-handle = <&PHY1>;

			linux,network-index = <1>;

		};



		Mpc8xx_pic: pic@ff000000 {

		PIC: interrupt-controller@0 {

			interrupt-controller;

			#address-cells = <0>;

			#interrupt-cells = <2>;

			reg = <0 24>;

			device_type = "mpc8xx-pic";

			compatible = "CPM";

			compatible = "fsl,mpc885-pic", "fsl,pq1-pic";

		};



		pcmcia@0080 {

		pcmcia@80 {

			#address-cells = <3>;

			#interrupt-cells = <1>;

			#size-cells = <2>;

			compatible = "fsl,pq-pcmcia";

			device_type = "pcmcia";

			reg = <80 80>;

			interrupt-parent = <&Mpc8xx_pic>;

			interrupt-parent = <&PIC>;

			interrupts = <d 1>;

		};



		cpm@ff000000 {

		cpm@9c0 {

			#address-cells = <1>;

			#size-cells = <1>;

			device_type = "cpm";

			model = "CPM";

			ranges = <0 0 4000>;

			reg = <860 f0>;

			compatible = "fsl,mpc885-cpm", "fsl,cpm1";

			command-proc = <9c0>;

			brg-frequency = <0>;

			interrupts = <0 2>;	// cpm error interrupt

			interrupt-parent = <&Cpm_pic>;

			interrupts = <0>;	// cpm error interrupt

			interrupt-parent = <&CPM_PIC>;

			reg = <9c0 40 2000 1c00>;

			ranges;



			Cpm_pic: pic@930 {

			brg@9f0 {

				compatible = "fsl,mpc885-brg",

				             "fsl,cpm1-brg",

				             "fsl,cpm-brg";

				reg = <9f0 10>;

			};



			CPM_PIC: interrupt-controller@930 {

				interrupt-controller;

				#address-cells = <0>;

				#interrupt-cells = <2>;

				#interrupt-cells = <1>;

				interrupts = <5 2 0 2>;

				interrupt-parent = <&Mpc8xx_pic>;

				interrupt-parent = <&PIC>;

				reg = <930 20>;

				device_type = "cpm-pic";

				compatible = "CPM";

				compatible = "fsl,mpc885-cpm-pic",

				             "fsl,cpm1-pic";

			};



			smc@a80 {

			serial@a80 {

				device_type = "serial";

				compatible = "cpm_uart";

				model = "SMC";

				device-id = <1>;

				compatible = "fsl,mpc885-smc-uart",

				             "fsl,cpm1-smc-uart";

				reg = <a80 10 3e80 40>;

				clock-setup = <00ffffff 0>;

				rx-clock = <1>;

				tx-clock = <1>;

				current-speed = <0>;

				interrupts = <4 3>;

				interrupt-parent = <&Cpm_pic>;

				interrupts = <4>;

				interrupt-parent = <&CPM_PIC>;

				fsl,cpm-brg = <1>;

				fsl,cpm-command = <0090>;

			};



			smc@a90 {

			serial@a90 {

				device_type = "serial";

				compatible = "cpm_uart";

				model = "SMC";

				device-id = <2>;

				reg = <a90 20 3f80 40>;

				clock-setup = <ff00ffff 90000>;

				rx-clock = <2>;

				tx-clock = <2>;

				current-speed = <0>;

				interrupts = <3 3>;

				interrupt-parent = <&Cpm_pic>;

			};



			scc@a40 {

				compatible = "fsl,mpc885-smc-uart",

				             "fsl,cpm1-smc-uart";

				reg = <a90 10 3f80 40>;

				interrupts = <3>;

				interrupt-parent = <&CPM_PIC>;

				fsl,cpm-brg = <2>;

				fsl,cpm-command = <00d0>;

			};



			ethernet@a40 {

				device_type = "network";

				compatible = "fs_enet";

				model = "SCC";

				device-id = <3>;

				reg = <a40 18 3e00 80>;

				mac-address = [ 00 00 0C 00 03 FD ];

				interrupts = <1c 3>;

				interrupt-parent = <&Cpm_pic>;

				phy-handle = <&Phy2>;

				compatible = "fsl,mpc885-scc-enet",

				             "fsl,cpm1-scc-enet";

				reg = <a40 18 3e00 100>;

				local-mac-address = [ 00 00 00 00 00 00 ];

				interrupts = <1c>;

				interrupt-parent = <&CPM_PIC>;

				phy-handle = <&PHY2>;

				fsl,cpm-command = <0080>;

				linux,network-index = <2>;

			};

		};

	};



	chosen {

		linux,stdout-path = "/soc/cpm/serial@a80";

	};

};

arch/powerpc/configs/mpc885_ads_defconfig

+153 −144
Original line number Diff line number Diff line 
#

# Automatically generated make config: don't edit

# Linux kernel version: 2.6.23-rc4

# Tue Aug 28 21:24:45 2007

# Linux kernel version: 2.6.23-rc3

# Mon Aug 27 15:23:16 2007

#

# CONFIG_PPC64 is not set
@@ -38,6 +38,7 @@ CONFIG_OF=y 
# CONFIG_PPC_UDBG_16550 is not set

# CONFIG_GENERIC_TBSYNC is not set

CONFIG_AUDIT_ARCH=y

CONFIG_GENERIC_BUG=y

# CONFIG_DEFAULT_UIMAGE is not set

# CONFIG_PPC_DCR_NATIVE is not set

# CONFIG_PPC_DCR_MMIO is not set
@@ -69,24 +70,25 @@ CONFIG_SYSCTL=y 
CONFIG_EMBEDDED=y

# CONFIG_SYSCTL_SYSCALL is not set

CONFIG_KALLSYMS=y

# CONFIG_KALLSYMS_ALL is not set

# CONFIG_KALLSYMS_EXTRA_PASS is not set

# CONFIG_HOTPLUG is not set

CONFIG_HOTPLUG=y

CONFIG_PRINTK=y

# CONFIG_BUG is not set

CONFIG_ELF_CORE=y

CONFIG_BUG=y

# CONFIG_ELF_CORE is not set

# CONFIG_BASE_FULL is not set

CONFIG_FUTEX=y

# CONFIG_FUTEX is not set

CONFIG_ANON_INODES=y

# CONFIG_EPOLL is not set

CONFIG_EPOLL=y

CONFIG_SIGNALFD=y

CONFIG_TIMERFD=y

CONFIG_EVENTFD=y

CONFIG_SHMEM=y

# CONFIG_VM_EVENT_COUNTERS is not set

CONFIG_SLAB=y

# CONFIG_SLUB is not set

CONFIG_SLUB_DEBUG=y

# CONFIG_SLAB is not set

CONFIG_SLUB=y

# CONFIG_SLOB is not set

CONFIG_RT_MUTEXES=y

# CONFIG_TINY_SHMEM is not set

CONFIG_BASE_SMALL=1

# CONFIG_MODULES is not set
@@ -100,14 +102,14 @@ CONFIG_BLOCK=y 
# IO Schedulers

#

CONFIG_IOSCHED_NOOP=y

CONFIG_IOSCHED_AS=y

# CONFIG_IOSCHED_AS is not set

CONFIG_IOSCHED_DEADLINE=y

CONFIG_IOSCHED_CFQ=y

CONFIG_DEFAULT_AS=y

# CONFIG_DEFAULT_DEADLINE is not set

# CONFIG_IOSCHED_CFQ is not set

# CONFIG_DEFAULT_AS is not set

CONFIG_DEFAULT_DEADLINE=y

# CONFIG_DEFAULT_CFQ is not set

# CONFIG_DEFAULT_NOOP is not set

CONFIG_DEFAULT_IOSCHED="anticipatory"

CONFIG_DEFAULT_IOSCHED="deadline"



#

# Platform support
@@ -120,6 +122,7 @@ CONFIG_CPM1=y 
# CONFIG_MPC8XXFADS is not set

# CONFIG_MPC86XADS is not set

CONFIG_MPC885ADS=y

# CONFIG_PPC_EP88XC is not set



#

# Freescale Ethernet driver platform-specific options
@@ -137,6 +140,7 @@ CONFIG_MPC8xx_SECOND_ETH_FEC2=y 
#

CONFIG_8xx_COPYBACK=y

# CONFIG_8xx_CPU6 is not set

CONFIG_8xx_CPU15=y

CONFIG_NO_UCODE_PATCH=y

# CONFIG_USB_SOF_UCODE_PATCH is not set

# CONFIG_I2C_SPI_UCODE_PATCH is not set
@@ -153,23 +157,23 @@ CONFIG_NO_UCODE_PATCH=y 
# CONFIG_GENERIC_IOMAP is not set

# CONFIG_CPU_FREQ is not set

# CONFIG_CPM2 is not set

# CONFIG_FSL_ULI1575 is not set

CONFIG_PPC_CPM_NEW_BINDING=y



#

# Kernel options

#

# CONFIG_HIGHMEM is not set

# CONFIG_HZ_100 is not set

CONFIG_HZ_100=y

# CONFIG_HZ_250 is not set

# CONFIG_HZ_300 is not set

CONFIG_HZ_1000=y

CONFIG_HZ=1000

# CONFIG_HZ_1000 is not set

CONFIG_HZ=100

CONFIG_PREEMPT_NONE=y

# CONFIG_PREEMPT_VOLUNTARY is not set

# CONFIG_PREEMPT is not set

CONFIG_BINFMT_ELF=y

# CONFIG_BINFMT_MISC is not set

CONFIG_MATH_EMULATION=y

# CONFIG_MATH_EMULATION is not set

CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

CONFIG_ARCH_FLATMEM_ENABLE=y

CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -185,11 +189,12 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 
CONFIG_ZONE_DMA_FLAG=1

CONFIG_BOUNCE=y

CONFIG_VIRT_TO_BUS=y

# CONFIG_PROC_DEVICETREE is not set

CONFIG_PROC_DEVICETREE=y

# CONFIG_CMDLINE_BOOL is not set

# CONFIG_PM is not set

# CONFIG_SECCOMP is not set

# CONFIG_WANT_DEVICE_TREE is not set

CONFIG_WANT_DEVICE_TREE=y

CONFIG_DEVICE_TREE="mpc885ads.dts"

CONFIG_ISA_DMA_API=y



#
@@ -206,6 +211,7 @@ CONFIG_FSL_SOC=y 
#

# PCCARD (PCMCIA/CardBus) support

#

# CONFIG_PCCARD is not set



#

# Advanced setup
@@ -234,10 +240,6 @@ CONFIG_NET=y 
CONFIG_PACKET=y

# CONFIG_PACKET_MMAP is not set

CONFIG_UNIX=y

CONFIG_XFRM=y

# CONFIG_XFRM_USER is not set

# CONFIG_XFRM_SUB_POLICY is not set

# CONFIG_XFRM_MIGRATE is not set

# CONFIG_NET_KEY is not set

CONFIG_INET=y

CONFIG_IP_MULTICAST=y
@@ -257,9 +259,9 @@ CONFIG_SYN_COOKIES=y 
# CONFIG_INET_IPCOMP is not set

# CONFIG_INET_XFRM_TUNNEL is not set

# CONFIG_INET_TUNNEL is not set

CONFIG_INET_XFRM_MODE_TRANSPORT=y

CONFIG_INET_XFRM_MODE_TUNNEL=y

CONFIG_INET_XFRM_MODE_BEET=y

# CONFIG_INET_XFRM_MODE_TRANSPORT is not set

# CONFIG_INET_XFRM_MODE_TUNNEL is not set

# CONFIG_INET_XFRM_MODE_BEET is not set

CONFIG_INET_DIAG=y

CONFIG_INET_TCP_DIAG=y

# CONFIG_TCP_CONG_ADVANCED is not set
@@ -319,22 +321,91 @@ CONFIG_DEFAULT_TCP_CONG="cubic" 
#

CONFIG_STANDALONE=y

CONFIG_PREVENT_FIRMWARE_BUILD=y

# CONFIG_FW_LOADER is not set

# CONFIG_DEBUG_DRIVER is not set

# CONFIG_DEBUG_DEVRES is not set

# CONFIG_SYS_HYPERVISOR is not set

# CONFIG_CONNECTOR is not set

# CONFIG_MTD is not set

CONFIG_MTD=y

# CONFIG_MTD_DEBUG is not set

# CONFIG_MTD_CONCAT is not set

# CONFIG_MTD_PARTITIONS is not set



#

# User Modules And Translation Layers

#

CONFIG_MTD_CHAR=y

CONFIG_MTD_BLKDEVS=y

CONFIG_MTD_BLOCK=y

# CONFIG_FTL is not set

# CONFIG_NFTL is not set

# CONFIG_INFTL is not set

# CONFIG_RFD_FTL is not set

# CONFIG_SSFDC is not set



#

# RAM/ROM/Flash chip drivers

#

# CONFIG_MTD_CFI is not set

CONFIG_MTD_JEDECPROBE=y

CONFIG_MTD_GEN_PROBE=y

CONFIG_MTD_CFI_ADV_OPTIONS=y

CONFIG_MTD_CFI_NOSWAP=y

# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set

# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set

CONFIG_MTD_CFI_GEOMETRY=y

# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set

# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set

CONFIG_MTD_MAP_BANK_WIDTH_4=y

# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set

# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set

# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set

# CONFIG_MTD_CFI_I1 is not set

# CONFIG_MTD_CFI_I2 is not set

CONFIG_MTD_CFI_I4=y

# CONFIG_MTD_CFI_I8 is not set

# CONFIG_MTD_OTP is not set

# CONFIG_MTD_CFI_INTELEXT is not set

CONFIG_MTD_CFI_AMDSTD=y

# CONFIG_MTD_CFI_STAA is not set

CONFIG_MTD_CFI_UTIL=y

# CONFIG_MTD_RAM is not set

# CONFIG_MTD_ROM is not set

# CONFIG_MTD_ABSENT is not set



#

# Mapping drivers for chip access

#

# CONFIG_MTD_COMPLEX_MAPPINGS is not set

# CONFIG_MTD_PHYSMAP is not set

CONFIG_MTD_PHYSMAP_OF=y

# CONFIG_MTD_PLATRAM is not set



#

# Self-contained MTD device drivers

#

# CONFIG_MTD_SLRAM is not set

# CONFIG_MTD_PHRAM is not set

# CONFIG_MTD_MTDRAM is not set

# CONFIG_MTD_BLOCK2MTD is not set



#

# Disk-On-Chip Device Drivers

#

# CONFIG_MTD_DOC2000 is not set

# CONFIG_MTD_DOC2001 is not set

# CONFIG_MTD_DOC2001PLUS is not set

# CONFIG_MTD_NAND is not set

# CONFIG_MTD_ONENAND is not set



#

# UBI - Unsorted block images

#

# CONFIG_MTD_UBI is not set

CONFIG_OF_DEVICE=y

# CONFIG_PARPORT is not set

CONFIG_BLK_DEV=y

# CONFIG_BLK_DEV_FD is not set

# CONFIG_BLK_DEV_COW_COMMON is not set

CONFIG_BLK_DEV_LOOP=y

# CONFIG_BLK_DEV_CRYPTOLOOP is not set

# CONFIG_BLK_DEV_NBD is not set

# CONFIG_BLK_DEV_RAM is not set

# CONFIG_CDROM_PKTCDVD is not set

# CONFIG_ATA_OVER_ETH is not set

CONFIG_MISC_DEVICES=y

# CONFIG_EEPROM_93CX6 is not set

# CONFIG_BLK_DEV is not set

# CONFIG_MISC_DEVICES is not set

# CONFIG_IDE is not set



#
@@ -368,16 +439,15 @@ CONFIG_DAVICOM_PHY=y 
# CONFIG_SMSC_PHY is not set

# CONFIG_BROADCOM_PHY is not set

# CONFIG_ICPLUS_PHY is not set

CONFIG_FIXED_PHY=y

CONFIG_FIXED_MII_10_FDX=y

# CONFIG_FIXED_MII_100_FDX is not set

# CONFIG_FIXED_PHY is not set

# CONFIG_MDIO_BITBANG is not set

CONFIG_NET_ETHERNET=y

CONFIG_MII=y

CONFIG_FS_ENET=y

CONFIG_FS_ENET_HAS_SCC=y

# CONFIG_FS_ENET_HAS_SCC is not set

CONFIG_FS_ENET_HAS_FEC=y

CONFIG_NETDEV_1000=y

CONFIG_NETDEV_10000=y

# CONFIG_NETDEV_1000 is not set

# CONFIG_NETDEV_10000 is not set



#

# Wireless LAN
@@ -397,55 +467,12 @@ CONFIG_NETDEV_10000=y 
#

# Input device support

#

CONFIG_INPUT=y

# CONFIG_INPUT_FF_MEMLESS is not set

# CONFIG_INPUT_POLLDEV is not set



#

# Userland interfaces

#

CONFIG_INPUT_MOUSEDEV=y

CONFIG_INPUT_MOUSEDEV_PSAUX=y

CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024

CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768

# CONFIG_INPUT_JOYDEV is not set

# CONFIG_INPUT_TSDEV is not set

# CONFIG_INPUT_EVDEV is not set

# CONFIG_INPUT_EVBUG is not set



#

# Input Device Drivers

#

CONFIG_INPUT_KEYBOARD=y

CONFIG_KEYBOARD_ATKBD=y

# CONFIG_KEYBOARD_SUNKBD is not set

# CONFIG_KEYBOARD_LKKBD is not set

# CONFIG_KEYBOARD_XTKBD is not set

# CONFIG_KEYBOARD_NEWTON is not set

# CONFIG_KEYBOARD_STOWAWAY is not set

CONFIG_INPUT_MOUSE=y

CONFIG_MOUSE_PS2=y

CONFIG_MOUSE_PS2_ALPS=y

CONFIG_MOUSE_PS2_LOGIPS2PP=y

CONFIG_MOUSE_PS2_SYNAPTICS=y

CONFIG_MOUSE_PS2_LIFEBOOK=y

CONFIG_MOUSE_PS2_TRACKPOINT=y

# CONFIG_MOUSE_PS2_TOUCHKIT is not set

# CONFIG_MOUSE_SERIAL is not set

# CONFIG_MOUSE_VSXXXAA is not set

# CONFIG_INPUT_JOYSTICK is not set

# CONFIG_INPUT_TABLET is not set

# CONFIG_INPUT_TOUCHSCREEN is not set

# CONFIG_INPUT_MISC is not set

# CONFIG_INPUT is not set



#

# Hardware I/O ports

#

CONFIG_SERIO=y

CONFIG_SERIO_I8042=y

CONFIG_SERIO_SERPORT=y

CONFIG_SERIO_LIBPS2=y

# CONFIG_SERIO_RAW is not set

# CONFIG_SERIO is not set

# CONFIG_GAMEPORT is not set



#
@@ -493,20 +520,7 @@ CONFIG_GEN_RTC=y 
# CONFIG_SPI_MASTER is not set

# CONFIG_W1 is not set

# CONFIG_POWER_SUPPLY is not set

CONFIG_HWMON=y

# CONFIG_HWMON_VID is not set

# CONFIG_SENSORS_ABITUGURU is not set

# CONFIG_SENSORS_ABITUGURU3 is not set

# CONFIG_SENSORS_F71805F is not set

# CONFIG_SENSORS_IT87 is not set

# CONFIG_SENSORS_PC87360 is not set

# CONFIG_SENSORS_PC87427 is not set

# CONFIG_SENSORS_SMSC47M1 is not set

# CONFIG_SENSORS_SMSC47B397 is not set

# CONFIG_SENSORS_VT1211 is not set

# CONFIG_SENSORS_W83627HF is not set

# CONFIG_SENSORS_W83627EHF is not set

# CONFIG_HWMON_DEBUG_CHIP is not set

# CONFIG_HWMON is not set



#

# Multifunction device drivers
@@ -530,7 +544,7 @@ CONFIG_DAB=y 
#

# CONFIG_DISPLAY_SUPPORT is not set

# CONFIG_VGASTATE is not set

CONFIG_VIDEO_OUTPUT_CONTROL=y

# CONFIG_VIDEO_OUTPUT_CONTROL is not set

# CONFIG_FB is not set

# CONFIG_FB_IBM_GXT4500 is not set
@@ -538,22 +552,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y 
# Sound

#

# CONFIG_SOUND is not set

CONFIG_HID_SUPPORT=y

CONFIG_HID=y

# CONFIG_HID_DEBUG is not set

CONFIG_USB_SUPPORT=y

# CONFIG_USB_ARCH_HAS_HCD is not set

# CONFIG_USB_ARCH_HAS_OHCI is not set

# CONFIG_USB_ARCH_HAS_EHCI is not set



#

# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'

#



#

# USB Gadget Support

#

# CONFIG_USB_GADGET is not set

# CONFIG_USB_SUPPORT is not set

# CONFIG_MMC is not set

# CONFIG_NEW_LEDS is not set

# CONFIG_EDAC is not set
@@ -580,19 +579,9 @@ CONFIG_USB_SUPPORT=y 
#

# File systems

#

CONFIG_EXT2_FS=y

CONFIG_EXT2_FS_XATTR=y

# CONFIG_EXT2_FS_POSIX_ACL is not set

# CONFIG_EXT2_FS_SECURITY is not set

# CONFIG_EXT2_FS_XIP is not set

CONFIG_EXT3_FS=y

CONFIG_EXT3_FS_XATTR=y

# CONFIG_EXT3_FS_POSIX_ACL is not set

# CONFIG_EXT3_FS_SECURITY is not set

# CONFIG_EXT2_FS is not set

# CONFIG_EXT3_FS is not set

# CONFIG_EXT4DEV_FS is not set

CONFIG_JBD=y

# CONFIG_JBD_DEBUG is not set

CONFIG_FS_MBCACHE=y

# CONFIG_REISERFS_FS is not set

# CONFIG_JFS_FS is not set

# CONFIG_FS_POSIX_ACL is not set
@@ -601,10 +590,9 @@ CONFIG_FS_MBCACHE=y 
# CONFIG_OCFS2_FS is not set

# CONFIG_MINIX_FS is not set

# CONFIG_ROMFS_FS is not set

CONFIG_INOTIFY=y

CONFIG_INOTIFY_USER=y

# CONFIG_INOTIFY is not set

# CONFIG_QUOTA is not set

CONFIG_DNOTIFY=y

# CONFIG_DNOTIFY is not set

# CONFIG_AUTOFS_FS is not set

# CONFIG_AUTOFS4_FS is not set

# CONFIG_FUSE_FS is not set
@@ -645,6 +633,7 @@ CONFIG_RAMFS=y 
# CONFIG_BEFS_FS is not set

# CONFIG_BFS_FS is not set

# CONFIG_EFS_FS is not set

# CONFIG_JFFS2_FS is not set

CONFIG_CRAMFS=y

# CONFIG_VXFS_FS is not set

# CONFIG_HPFS_FS is not set
@@ -711,15 +700,13 @@ CONFIG_MSDOS_PARTITION=y 
#

# Library routines

#

CONFIG_BITREVERSE=y

CONFIG_CRC_CCITT=y

# CONFIG_CRC_CCITT is not set

# CONFIG_CRC16 is not set

# CONFIG_CRC_ITU_T is not set

CONFIG_CRC32=y

# CONFIG_CRC32 is not set

# CONFIG_CRC7 is not set

# CONFIG_LIBCRC32C is not set

CONFIG_ZLIB_INFLATE=y

CONFIG_PLIST=y

CONFIG_HAS_IOMEM=y

CONFIG_HAS_IOPORT=y

CONFIG_HAS_DMA=y
@@ -734,11 +721,33 @@ CONFIG_HAS_DMA=y 
#

# CONFIG_PRINTK_TIME is not set

CONFIG_ENABLE_MUST_CHECK=y

# CONFIG_MAGIC_SYSRQ is not set

CONFIG_MAGIC_SYSRQ=y

# CONFIG_UNUSED_SYMBOLS is not set

# CONFIG_DEBUG_FS is not set

# CONFIG_HEADERS_CHECK is not set

# CONFIG_DEBUG_KERNEL is not set

CONFIG_DEBUG_KERNEL=y

# CONFIG_DEBUG_SHIRQ is not set

CONFIG_DETECT_SOFTLOCKUP=y

CONFIG_SCHED_DEBUG=y

# CONFIG_SCHEDSTATS is not set

# CONFIG_TIMER_STATS is not set

# CONFIG_SLUB_DEBUG_ON is not set

# CONFIG_DEBUG_SPINLOCK is not set

# CONFIG_DEBUG_MUTEXES is not set

# CONFIG_DEBUG_SPINLOCK_SLEEP is not set

# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set

# CONFIG_DEBUG_KOBJECT is not set

CONFIG_DEBUG_BUGVERBOSE=y

CONFIG_DEBUG_INFO=y

# CONFIG_DEBUG_VM is not set

# CONFIG_DEBUG_LIST is not set

CONFIG_FORCED_INLINING=y

# CONFIG_FAULT_INJECTION is not set

# CONFIG_DEBUG_STACKOVERFLOW is not set

# CONFIG_DEBUG_STACK_USAGE is not set

# CONFIG_DEBUG_PAGEALLOC is not set

# CONFIG_DEBUGGER is not set

# CONFIG_BDI_SWITCH is not set

# CONFIG_PPC_EARLY_DEBUG is not set



#

arch/powerpc/platforms/8xx/Kconfig

+1 −0
Original line number Diff line number Diff line
@@ -26,6 +26,7 @@ config MPC86XADS 
config MPC885ADS

	bool "MPC885ADS"

	select CPM1

	select PPC_CPM_NEW_BINDING

	help

	  Freescale Semiconductor MPC885 Application Development System (ADS).

	  Also known as DUET.

arch/powerpc/platforms/8xx/mpc885ads.h

+0 −38
Original line number Diff line number Diff line
@@ -17,25 +17,10 @@ 


#include <sysdev/fsl_soc.h>



/* U-Boot maps BCSR to 0xff080000 */

#define BCSR_ADDR		((uint)0xff080000)

#define BCSR_SIZE		((uint)32)

#define BCSR0			((uint)(BCSR_ADDR + 0x00))

#define BCSR1			((uint)(BCSR_ADDR + 0x04))

#define BCSR2			((uint)(BCSR_ADDR + 0x08))

#define BCSR3			((uint)(BCSR_ADDR + 0x0c))

#define BCSR4			((uint)(BCSR_ADDR + 0x10))



#define CFG_PHYDEV_ADDR		((uint)0xff0a0000)

#define BCSR5			((uint)(CFG_PHYDEV_ADDR + 0x300))



#define MPC8xx_CPM_OFFSET	(0x9c0)

#define CPM_MAP_ADDR		(get_immrbase() + MPC8xx_CPM_OFFSET)

#define CPM_IRQ_OFFSET		16     // for compability with cpm_uart driver



#define PCMCIA_MEM_ADDR		((uint)0xff020000)

#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))



/* Bits of interest in the BCSRs.

 */

#define BCSR1_ETHEN		((uint)0x20000000)
@@ -64,28 +49,5 @@ 
#define BCSR5_MII1_EN		0x02

#define BCSR5_MII1_RST		0x01



/* Interrupt level assignments */

#define PHY_INTERRUPT	SIU_IRQ7	/* PHY link change interrupt */

#define SIU_INT_FEC1	SIU_LEVEL1	/* FEC1 interrupt */

#define SIU_INT_FEC2	SIU_LEVEL3	/* FEC2 interrupt */

#define FEC_INTERRUPT	SIU_INT_FEC1	/* FEC interrupt */



/* We don't use the 8259 */

#define NR_8259_INTS	0



/* CPM Ethernet through SCC3 */

#define PA_ENET_RXD	((ushort)0x0040)

#define PA_ENET_TXD	((ushort)0x0080)

#define PE_ENET_TCLK	((uint)0x00004000)

#define PE_ENET_RCLK	((uint)0x00008000)

#define PE_ENET_TENA	((uint)0x00000010)

#define PC_ENET_CLSN	((ushort)0x0400)

#define PC_ENET_RENA	((ushort)0x0800)



/* Control bits in the SICR to route TCLK (CLK5) and RCLK (CLK6) to

 * SCC3.  Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero */

#define SICR_ENET_MASK	((uint)0x00ff0000)

#define SICR_ENET_CLKRT	((uint)0x002c0000)



#endif /* __ASM_MPC885ADS_H__ */

#endif /* __KERNEL__ */

arch/powerpc/platforms/8xx/mpc885ads_setup.c

+152 −298

File changed.

Preview size limit exceeded, changes collapsed.