Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 1d732e8c authored by Arik Nemtsov's avatar Arik Nemtsov Committed by Luciano Coelho
Browse files

wl12xx: Clamp byte mode transfers for 128x chips 



On wl128x based devices, when TX packets are aggregated, each packet
size must be aligned to the SDIO block size, and sent using block mode
transfers.

The block size is set to 256 bytes, which is less than the maximum
possible byte transfer. Thus, if two small packets (< 256 bytes) are
aggregated, the aggregation buffer size would be 512, and will be sent
using byte mode transfers. This can have undesired side effects.

Fix this by setting the MMC_QUIRK_BLKSZ_FOR_BYTE_MODE mmc card quirk.
For 127x chips this has no effect, as the block size is set to 512
bytes.

Signed-off-by: default avatarArik Nemtsov <arik@wizery.com>
Signed-off-by: default avatarIdo Yariv <ido@wizery.com>
Signed-off-by: default avatarLuciano Coelho <coelho@ti.com>
parent 958b20e0

drivers/net/wireless/wl12xx/sdio.c

+3 −0
Original line number Diff line number Diff line
@@ -246,6 +246,9 @@ static int __devinit wl1271_probe(struct sdio_func *func, 
	/* Grab access to FN0 for ELP reg. */

	func->card->quirks |= MMC_QUIRK_LENIENT_FN0;



	/* Use block mode for transferring over one block size of data */

	func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;



	wlan_data = wl12xx_get_platform_data();

	if (IS_ERR(wlan_data)) {

		ret = PTR_ERR(wlan_data);

drivers/net/wireless/wl12xx/sdio_test.c

+3 −0
Original line number Diff line number Diff line
@@ -417,6 +417,9 @@ static int __devinit wl1271_probe(struct sdio_func *func, 
	/* Grab access to FN0 for ELP reg. */

	func->card->quirks |= MMC_QUIRK_LENIENT_FN0;



	/* Use block mode for transferring over one block size of data */

	func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;



	wlan_data = wl12xx_get_platform_data();

	if (IS_ERR(wlan_data)) {

		ret = PTR_ERR(wlan_data);