Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 1a898a79 authored by Vijaya Mohan Guvva's avatar Vijaya Mohan Guvva Committed by James Bottomley
Browse files

[SCSI] bfa: Add dynamic diagnostic port support 



D-Port is a new port type created with the intention of running link
level diagnostic tests like loopback, traffic test. In static D-port
mode, user configures the port to D-port mode and starts the test, but
in dynamic D-port, once the Brocade switch port is configured to
D-port, it will reject the regular FLOGI from HBA with reason that it is
in D-port mode. So based on the reason code HBA port will turn itself into
D-port and start diagnostic test.

Signed-off-by: default avatarSudarsana Reddy Kalluru <skalluru@brocade.com>
Signed-off-by: default avatarVijaya Mohan Guvva <vmohan@brocade.com>
Signed-off-by: default avatarJames Bottomley <JBottomley@Parallels.com>
parent 4e1e0d8d

drivers/scsi/bfa/bfa_defs.h

+68 −11
Original line number Diff line number Diff line
@@ -199,15 +199,34 @@ enum bfa_status { 
	BFA_STATUS_DPORT_DISABLED = 236, /* D-port mode is already disabled */

	BFA_STATUS_CMD_NOTSUPP_MEZZ = 239, /* Cmd not supported for MEZZ card */

	BFA_STATUS_FRU_NOT_PRESENT = 240, /* fru module not present */

	BFA_STATUS_DPORT_NO_SFP = 243, /* SFP is not present.\n D-port will be

					* enabled but it will be operational

					* only after inserting a valid SFP. */

	BFA_STATUS_DPORT_ERR = 245,	/* D-port mode is enabled */

	BFA_STATUS_DPORT_ENOSYS = 254, /* Switch has no D_Port functionality */

	BFA_STATUS_DPORT_CANT_PERF = 255, /* Switch port is not D_Port capable

					* or D_Port is disabled */

	BFA_STATUS_DPORT_LOGICALERR = 256, /* Switch D_Port fail */

	BFA_STATUS_DPORT_SWBUSY = 257, /* Switch port busy */

	BFA_STATUS_ERR_BBCR_SPEED_UNSUPPORT = 258, /*!< BB credit recovery is

					* supported at max port speed alone */

	BFA_STATUS_ERROR_BBCR_ENABLED  = 259, /*!< BB credit recovery

					* is enabled */

	BFA_STATUS_INVALID_BBSCN = 260, /*!< Invalid BBSCN value.

					 * Valid range is [1-15] */

	BFA_STATUS_DDPORT_ERR = 261, /* Dynamic D_Port mode is active.\n To

					* exit dynamic mode, disable D_Port on

					* the remote port */

	BFA_STATUS_DPORT_SFPWRAP_ERR = 262, /* Clear e/o_wrap fail, check or

						* replace SFP */

	BFA_STATUS_BBCR_CFG_NO_CHANGE = 265, /*!< BBCR is operational.

			* Disable BBCR and try this operation again. */

	BFA_STATUS_DPORT_SW_NOTREADY = 268, /* Remote port is not ready to

					* start dport test. Check remote

					* port status. */

	BFA_STATUS_DPORT_INV_SFP = 271, /* Invalid SFP for D-PORT mode. */

	BFA_STATUS_DPORT_CMD_NOTSUPP    = 273, /* Dport is not supported by

					* remote port */

	BFA_STATUS_MAX_VAL		/* Unknown error code */

};

#define bfa_status_t enum bfa_status
@@ -526,17 +545,6 @@ struct bfa_ioc_aen_data_s { 
	mac_t	mac;

};



/*

 *	D-port states

 *

*/

enum bfa_dport_state {

	BFA_DPORT_ST_DISABLED	= 0,	/* D-port is Disabled */

	BFA_DPORT_ST_DISABLING	= 1,	/* D-port is Disabling */

	BFA_DPORT_ST_ENABLING	= 2,	/* D-port is Enabling */

	BFA_DPORT_ST_ENABLED	= 3,	/* D-port is Enabled */

};



/*

 * ---------------------- mfg definitions ------------

 */
@@ -1136,6 +1144,7 @@ struct bfa_flash_attr_s { 
#define LB_PATTERN_DEFAULT	0xB5B5B5B5

#define QTEST_CNT_DEFAULT	10

#define QTEST_PAT_DEFAULT	LB_PATTERN_DEFAULT

#define DPORT_ENABLE_LOOPCNT_DEFAULT (1024 * 1024)



struct bfa_diag_memtest_s {

	u8	algo;
@@ -1164,6 +1173,54 @@ struct bfa_diag_loopback_result_s { 
	u8	rsvd[3];

};



enum bfa_diag_dport_test_status {

	DPORT_TEST_ST_IDLE	= 0,    /* the test has not started yet. */

	DPORT_TEST_ST_FINAL	= 1,    /* the test done successfully */

	DPORT_TEST_ST_SKIP	= 2,    /* the test skipped */

	DPORT_TEST_ST_FAIL	= 3,    /* the test failed */

	DPORT_TEST_ST_INPRG	= 4,    /* the testing is in progress */

	DPORT_TEST_ST_RESPONDER	= 5,    /* test triggered from remote port */

	DPORT_TEST_ST_STOPPED	= 6,    /* the test stopped by user. */

	DPORT_TEST_ST_MAX

};



enum bfa_diag_dport_test_type {

	DPORT_TEST_ELOOP	= 0,

	DPORT_TEST_OLOOP	= 1,

	DPORT_TEST_ROLOOP	= 2,

	DPORT_TEST_LINK		= 3,

	DPORT_TEST_MAX

};



enum bfa_diag_dport_test_opmode {

	BFA_DPORT_OPMODE_AUTO	= 0,

	BFA_DPORT_OPMODE_MANU	= 1,

};



struct bfa_diag_dport_subtest_result_s {

	u8	status;		/* bfa_diag_dport_test_status */

	u8	rsvd[7];	/* 64bit align */

	u64	start_time;	/* timestamp  */

};



struct bfa_diag_dport_result_s {

	wwn_t	rp_pwwn;	/* switch port wwn  */

	wwn_t	rp_nwwn;	/* switch node wwn  */

	u64	start_time;	/* user/sw start time */

	u64	end_time;	/* timestamp  */

	u8	status;		/* bfa_diag_dport_test_status */

	u8	mode;		/* bfa_diag_dport_test_opmode */

	u8	rsvd;		/* 64bit align */

	u8	speed;		/* link speed for buf_reqd */

	u16	buffer_required;

	u16	frmsz;		/* frame size for buf_reqd */

	u32	lpcnt;		/* Frame count */

	u32	pat;		/* Pattern */

	u32	roundtrip_latency;	/* in nano sec */

	u32	est_cable_distance;	/* in meter */

	struct bfa_diag_dport_subtest_result_s subtest[DPORT_TEST_MAX];

};



struct bfa_diag_ledtest_s {

	u32	cmd;    /* bfa_led_op_t */

	u32	color;  /* bfa_led_color_t */

drivers/scsi/bfa/bfa_defs_svc.h

+1 −0
Original line number Diff line number Diff line
@@ -761,6 +761,7 @@ enum bfa_port_states { 
	BFA_PORT_ST_TOGGLING_QWAIT	= 14,

	BFA_PORT_ST_FAA_MISCONFIG	= 15,

	BFA_PORT_ST_DPORT		= 16,

	BFA_PORT_ST_DDPORT		= 17,

	BFA_PORT_ST_MAX_STATE,

};