Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 15e7cead authored by Johan Hovold's avatar Johan Hovold Committed by Greg Kroah-Hartman
Browse files

USB: pl2303: refactor baud-rate handling 



Break out baud-rate handling from set_termios.

Signed-off-by: default avatarJohan Hovold <jhovold@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent c7b13475

drivers/usb/serial/pl2303.c

+69 −58
Original line number Diff line number Diff line
@@ -263,68 +263,21 @@ static int pl2303_set_control_lines(struct usb_serial_port *port, u8 value) 
	return retval;

}



static void pl2303_set_termios(struct tty_struct *tty,

		struct usb_serial_port *port, struct ktermios *old_termios)

static void pl2303_encode_baudrate(struct tty_struct *tty,

					struct usb_serial_port *port,

					u8 buf[4])

{

	struct usb_serial *serial = port->serial;

	struct pl2303_serial_private *spriv = usb_get_serial_data(serial);

	struct pl2303_private *priv = usb_get_serial_port_data(port);

	unsigned long flags;

	unsigned int cflag;

	unsigned char *buf;

	int baud;

	int i;

	u8 control;

	const int baud_sup[] = { 75, 150, 300, 600, 1200, 1800, 2400, 3600,

	                         4800, 7200, 9600, 14400, 19200, 28800, 38400,

	                         57600, 115200, 230400, 460800, 500000, 614400,

	                         921600, 1228800, 2457600, 3000000, 6000000 };



	struct usb_serial *serial = port->serial;

	struct pl2303_serial_private *spriv = usb_get_serial_data(serial);

	int baud;

	int baud_floor, baud_ceil;

	int k;



	/* The PL2303 is reported to lose bytes if you change

	   serial settings even to the same values as before. Thus

	   we actually need to filter in this specific case */



	if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))

		return;



	cflag = tty->termios.c_cflag;



	buf = kzalloc(7, GFP_KERNEL);

	if (!buf) {

		dev_err(&port->dev, "%s - out of memory.\n", __func__);

		/* Report back no change occurred */

		if (old_termios)

			tty->termios = *old_termios;

		return;

	}



	i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),

			    GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,

			    0, 0, buf, 7, 100);

	dev_dbg(&port->dev, "0xa1:0x21:0:0  %d - %7ph\n", i, buf);



	if (cflag & CSIZE) {

		switch (cflag & CSIZE) {

		case CS5:

			buf[6] = 5;

			break;

		case CS6:

			buf[6] = 6;

			break;

		case CS7:

			buf[6] = 7;

			break;

		default:

		case CS8:

			buf[6] = 8;

			break;

		}

		dev_dbg(&port->dev, "data bits = %d\n", buf[6]);

	}



	/* For reference buf[0]:buf[3] baud rate value */

	/* NOTE: Only the values defined in baud_sup are supported !

	 *       => if unsupported values are set, the PL2303 seems to use

	 *          9600 baud (at least my PL2303X always does)
@@ -378,6 +331,68 @@ static void pl2303_set_termios(struct tty_struct *tty, 
		}

	}



	/* Save resulting baud rate */

	if (baud)

		tty_encode_baud_rate(tty, baud, baud);

}



static void pl2303_set_termios(struct tty_struct *tty,

		struct usb_serial_port *port, struct ktermios *old_termios)

{

	struct usb_serial *serial = port->serial;

	struct pl2303_serial_private *spriv = usb_get_serial_data(serial);

	struct pl2303_private *priv = usb_get_serial_port_data(port);

	unsigned long flags;

	unsigned int cflag;

	unsigned char *buf;

	int i;

	u8 control;



	/* The PL2303 is reported to lose bytes if you change

	   serial settings even to the same values as before. Thus

	   we actually need to filter in this specific case */



	if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))

		return;



	cflag = tty->termios.c_cflag;



	buf = kzalloc(7, GFP_KERNEL);

	if (!buf) {

		dev_err(&port->dev, "%s - out of memory.\n", __func__);

		/* Report back no change occurred */

		if (old_termios)

			tty->termios = *old_termios;

		return;

	}



	i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),

			    GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,

			    0, 0, buf, 7, 100);

	dev_dbg(&port->dev, "0xa1:0x21:0:0  %d - %7ph\n", i, buf);



	if (cflag & CSIZE) {

		switch (cflag & CSIZE) {

		case CS5:

			buf[6] = 5;

			break;

		case CS6:

			buf[6] = 6;

			break;

		case CS7:

			buf[6] = 7;

			break;

		default:

		case CS8:

			buf[6] = 8;

			break;

		}

		dev_dbg(&port->dev, "data bits = %d\n", buf[6]);

	}



	/* For reference buf[0]:buf[3] baud rate value */

	pl2303_encode_baudrate(tty, port, &buf[0]);



	/* For reference buf[4]=0 is 1 stop bits */

	/* For reference buf[4]=1 is 1.5 stop bits */

	/* For reference buf[4]=2 is 2 stop bits */
@@ -461,10 +476,6 @@ static void pl2303_set_termios(struct tty_struct *tty, 
		pl2303_vendor_write(0x0, 0x0, serial);

	}



	/* Save resulting baud rate */

	if (baud)

		tty_encode_baud_rate(tty, baud, baud);



	kfree(buf);

}