ARM: dts: sun5i: Add new Utoo P66 board

	sun5i-a10s-r7-tv-dongle.dtb \

	sun5i-a13-hsg-h702.dtb \

	sun5i-a13-olinuxino.dtb \

	sun5i-a13-olinuxino-micro.dtb

	sun5i-a13-olinuxino-micro.dtb \

	sun5i-a13-utoo-p66.dtb

dtb-$(CONFIG_MACH_SUN6I) += \

	sun6i-a31-app4-evb1.dtb \

	sun6i-a31-colombus.dtb \

/*

 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This file is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License as

 *     published by the Free Software Foundation; either version 2 of the

 *     License, or (at your option) any later version.

 *

 *     This file is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 *     You should have received a copy of the GNU General Public

 *     License along with this file; if not, write to the Free

 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,

 *     MA 02110-1301 USA

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */

/dts-v1/;

#include "sun5i-a13.dtsi"

#include "sunxi-common-regulators.dtsi"

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/input/input.h>

#include <dt-bindings/pinctrl/sun4i-a10.h>

/ {

	model = "Utoo P66";

	compatible = "utoo,p66", "allwinner,sun5i-a13";

	i2c_lcd: i2c@0 {

		/* The lcd panel i2c interface is hooked up via gpios */

		compatible = "i2c-gpio";

		pinctrl-names = "default";

		pinctrl-0 = <&i2c_lcd_pins>;

		gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>, /* PG12, sda */

			<&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10, scl */

		i2c-gpio,delay-us = <5>;

	};

};

&cpu0 {

	cpu-supply = <&reg_dcdc2>;

};

&ehci0 {

	status = "okay";

};

&i2c0 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c0_pins_a>;

	status = "okay";

	axp209: pmic@34 {

		reg = <0x34>;

		interrupts = <0>;

	};

};

#include "axp209.dtsi"

&i2c1 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c1_pins_a>;

	status = "okay";

	pcf8563: rtc@51 {

		compatible = "nxp,pcf8563";

		reg = <0x51>;

	};

};

&lradc {

	vref-supply = <&reg_ldo2>;

	status = "okay";

	button@200 {

		label = "Volume Up";

		linux,code = <KEY_VOLUMEUP>;

		channel = <0>;

		voltage = <200000>;

	};

	button@400 {

		label = "Volume Down";

		linux,code = <KEY_VOLUMEDOWN>;

		channel = <0>;

		voltage = <400000>;

	};

};

&mmc0 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_p66>;

	vmmc-supply = <&reg_vcc3v3>;

	bus-width = <4>;

	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */

	cd-inverted;

	status = "okay";

};

&mmc2 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc2_pins_a>;

	vmmc-supply = <&reg_vcc3v3>;

	bus-width = <8>;

	non-removable;

	status = "okay";

};

&pio {

	mmc0_cd_pin_p66: mmc0_cd_pin@0 {

		allwinner,pins = "PG0";

		allwinner,function = "gpio_in";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;

	};

	i2c_lcd_pins: i2c_lcd_pin@0 {

		allwinner,pins = "PG10", "PG12";

		allwinner,function = "gpio_out";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;

	};

	usb0_vbus_pin_a: usb0_vbus_pin@0 {

		allwinner,pins = "PB4";

		allwinner,function = "gpio_out";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

	};

};

&reg_dcdc2 {

	regulator-always-on;

	regulator-min-microvolt = <1000000>;

	regulator-max-microvolt = <1500000>;

	regulator-name = "vdd-cpu";

};

&reg_dcdc3 {

	regulator-always-on;

	regulator-min-microvolt = <1000000>;

	regulator-max-microvolt = <1400000>;

	regulator-name = "vdd-int-pll";

};

&reg_ldo1 {

	regulator-name = "vdd-rtc";

};

&reg_ldo2 {

	regulator-always-on;

	regulator-min-microvolt = <3000000>;

	regulator-max-microvolt = <3000000>;

	regulator-name = "avcc";

};

&reg_ldo3 {

	regulator-min-microvolt = <3300000>;

	regulator-max-microvolt = <3300000>;

	regulator-name = "vcc-wifi";

};

&reg_usb0_vbus {

	gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */

	status = "okay";

};

&usbphy {

	usb0_vbus-supply = <&reg_usb0_vbus>;

	usb1_vbus-supply = <&reg_ldo3>;

	status = "okay";

};