Merge "ARM: dts: msm: add a new panel driver for MSMCOBALT QRD SKUK board" (e9a7b484) · Commits · e / devices / android_kernel_sony_msm8998

arch/arm/boot/dts/qcom/dsi-panel-jdi-a407-dualmipi-wqhd-cmd.dtsi

0 → 100644

+80 −0

Original line number	Diff line number	Diff line
		/* Copyright (c) 2016, The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		* only version 2 as published by the Free Software Foundation.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*/

		&mdss_mdp {
		dsi_dual_jdi_a407_cmd: qcom,mdss_dsi_jdi_a407_wqhd_cmd {
		qcom,mdss-dsi-panel-name = "JDI a407 wqhd cmd mode dsi panel";
		qcom,mdss-dsi-panel-type = "dsi_cmd_mode";
		qcom,mdss-dsi-panel-framerate = <60>;
		qcom,mdss-dsi-virtual-channel-id = <0>;
		qcom,mdss-dsi-stream = <0>;
		qcom,mdss-dsi-panel-width = <720>;
		qcom,mdss-dsi-panel-height = <2560>;
		qcom,mdss-dsi-h-front-porch = <16>;
		qcom,mdss-dsi-h-back-porch = <40>;
		qcom,mdss-dsi-h-pulse-width = <4>;
		qcom,mdss-dsi-h-sync-skew = <0>;
		qcom,mdss-dsi-v-back-porch = <20>;
		qcom,mdss-dsi-v-front-porch = <7>;
		qcom,mdss-dsi-v-pulse-width = <1>;
		qcom,mdss-dsi-h-left-border = <0>;
		qcom,mdss-dsi-h-right-border = <0>;
		qcom,mdss-dsi-v-top-border = <0>;
		qcom,mdss-dsi-v-bottom-border = <0>;
		qcom,mdss-dsi-bpp = <24>;
		qcom,mdss-dsi-color-order = "rgb_swap_rgb";
		qcom,mdss-dsi-underflow-color = <0xff>;
		qcom,mdss-dsi-border-color = <0>;
		qcom,mdss-dsi-on-command = [
		15 01 00 00 00 00 02 35 00
		05 01 00 00 78 00 02 11 00
		05 01 00 00 32 00 02 29 00];
		qcom,mdss-dsi-off-command = [
		05 01 00 00 32 00 02 28 00
		05 01 00 00 78 00 02 10 00];
		qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
		qcom,mdss-dsi-off-command-state = "dsi_hs_mode";
		qcom,mdss-dsi-traffic-mode = "burst_mode";
		qcom,mdss-dsi-lane-map = "lane_map_0123";
		qcom,mdss-dsi-bllp-eof-power-mode;
		qcom,mdss-dsi-bllp-power-mode;
		qcom,mdss-dsi-lane-0-state;
		qcom,mdss-dsi-lane-1-state;
		qcom,mdss-dsi-lane-2-state;
		qcom,mdss-dsi-lane-3-state;
		qcom,mdss-dsi-dma-trigger = "trigger_sw";
		qcom,mdss-dsi-mdp-trigger = "none";

		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
		qcom,mdss-dsi-bl-min-level = <1>;
		qcom,mdss-dsi-bl-max-level = <4095>;

		qcom,mdss-dsi-te-using-te-pin;
		qcom,mdss-dsi-te-pin-select = <1>;
		qcom,mdss-dsi-te-v-sync-rd-ptr-irq-line = <0x2c>;
		qcom,mdss-dsi-te-dcs-command = <1>;

		qcom,mdss-dsi-lp11-init;
		qcom,adjust-timer-wakeup-ms = <1>;
		qcom,mdss-dsi-reset-sequence = <1 20>, <0 10>, <1 20>;

		qcom,config-select = <&dsi_dual_jdi_a407_cmd_config0>;

		dsi_dual_jdi_a407_cmd_config0: config0 {
		qcom,split-mode = "dualctl-split";
		};

		dsi_dual_jdi_a407_cmd_config1: config1 {
		qcom,split-mode = "pingpong-split";
		};
		};
		};

arch/arm/boot/dts/qcom/msmcobalt-mdss-panels.dtsi

+7 −0

Original line number	Diff line number	Diff line
		@@ -25,6 +25,7 @@
		#include "dsi-panel-sharp-1080p-cmd.dtsi"
		#include "dsi-panel-jdi-1080p-video.dtsi"
		#include "dsi-panel-sharp-dualmipi-1080p-120hz.dtsi"
		#include "dsi-panel-jdi-a407-dualmipi-wqhd-cmd.dtsi"

		&soc {
		dsi_panel_pwr_supply: dsi_panel_pwr_supply {
		@@ -156,3 +157,9 @@
		qcom,mdss-dsi-t-clk-post = <0x7>;
		qcom,mdss-dsi-t-clk-pre = <0x26>;
		};

		&dsi_dual_jdi_a407_cmd {
		qcom,mdss-dsi-panel-timings = [00 16 05 05 09 0e 05 05 04 03 04 00];
		qcom,mdss-dsi-t-clk-post = <0x06>;
		qcom,mdss-dsi-t-clk-pre = <0x22>;
		};

arch/arm/boot/dts/qcom/msmcobalt-qrd-skuk.dtsi

+67 −0

Original line number	Diff line number	Diff line
		@@ -126,3 +126,70 @@
		qcom,wsa-aux-dev-prefix = "SpkrLeft", "SpkrLeft";
		};
		};

		&pmx_mdss {
		mdss_dsi_active: mdss_dsi_active {
		mux {
		pins = "gpio94";
		function = "gpio";
		};

		config {
		pins = "gpio94";
		drive-strength = <8>; /* 8 mA */
		bias-disable = <0>; /* no pull */
		output-high;
		};
		};

		mdss_dsi_suspend: mdss_dsi_suspend {
		mux {
		pins = "gpio94";
		function = "gpio";
		};

		config {
		pins = "gpio94";
		drive-strength = <2>; /* 2 mA */
		bias-pull-down; /* pull down */
		};
		};
		};

		&mdss_mdp {
		qcom,mdss-pref-prim-intf = "dsi";
		};

		&mdss_dsi {
		hw-config = "split_dsi";
		};

		&mdss_dsi0 {
		qcom,dsi-pref-prim-pan = <&dsi_dual_jdi_a407_cmd>;
		pinctrl-names = "mdss_default", "mdss_sleep";
		pinctrl-0 = <&mdss_dsi_active &mdss_te_active>;
		pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>;
		qcom,platform-reset-gpio = <&tlmm 94 0>;
		qcom,platform-te-gpio = <&tlmm 10 0>;
		};

		&mdss_dsi1 {
		qcom,dsi-pref-prim-pan = <&dsi_dual_jdi_a407_cmd>;
		pinctrl-names = "mdss_default", "mdss_sleep";
		pinctrl-0 = <&mdss_dsi_active &mdss_te_active>;
		pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>;
		qcom,platform-reset-gpio = <&tlmm 94 0>;
		qcom,platform-te-gpio = <&tlmm 10 0>;
		};

		&labibb {
		status = "ok";
		qpnp,qpnp-labibb-mode = "lcd";
		};

		&dsi_dual_jdi_a407_cmd {
		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
		qcom,mdss-dsi-bl-min-level = <1>;
		qcom,mdss-dsi-bl-max-level = <4095>;
		qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
		};