Merge "ARM: dts: msm: add a new panel driver to enable display for QVR8998"

/* Copyright (c) 2016, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */

&mdss_mdp {

	dsi_dual_s6e3ha3_amoled_cmd: qcom,mdss_dsi_s6e3ha3_amoled_wqhd_cmd{

		qcom,mdss-dsi-panel-name =

			"Dual s6e3ha3 amoled cmd mode dsi panel";

		qcom,mdss-dsi-panel-type = "dsi_cmd_mode";

		qcom,mdss-dsi-panel-framerate = <60>;

		qcom,mdss-dsi-virtual-channel-id = <0>;

		qcom,mdss-dsi-stream = <0>;

		qcom,mdss-dsi-panel-width = <720>;

		qcom,mdss-dsi-panel-height = <2560>;

		qcom,mdss-dsi-h-front-porch = <100>;

		qcom,mdss-dsi-h-back-porch = <100>;

		qcom,mdss-dsi-h-pulse-width = <40>;

		qcom,mdss-dsi-h-sync-skew = <0>;

		qcom,mdss-dsi-v-back-porch = <31>;

		qcom,mdss-dsi-v-front-porch = <30>;

		qcom,mdss-dsi-v-pulse-width = <8>;

		qcom,mdss-dsi-h-left-border = <0>;

		qcom,mdss-dsi-h-right-border = <0>;

		qcom,mdss-dsi-v-top-border = <0>;

		qcom,mdss-dsi-v-bottom-border = <0>;

		qcom,mdss-dsi-bpp = <24>;

		qcom,mdss-dsi-underflow-color = <0xff>;

		qcom,mdss-dsi-border-color = <0>;

		qcom,mdss-dsi-color-order = "rgb_swap_rgb";

		qcom,mdss-dsi-on-command = [05 01 00 00 05 00 02 11 00

					39 01 00 00 00 00 05 2a 00 00 05 9f

					39 01 00 00 00 00 05 2b 00 00 09 ff

					39 01 00 00 00 00 03 f0 5a 5a

					39 01 00 00 00 00 02 b0 10

					39 01 00 00 00 00 02 b5 a0

					39 01 00 00 00 00 02 c4 03

					39 01 00 00 00 00 0a

						f6 42 57 37 00 aa cc d0 00 00

					39 01 00 00 00 00 02 f9 03

					39 01 00 00 00 00 14

						c2 00 00 d8 d8 00 80 2b 05 08

						0e 07 0b 05 0d 0a 15 13 20 1e

					39 01 00 00 78 00 03 f0 a5 a5

					39 01 00 00 00 00 02 35 00

					39 01 00 00 00 00 02 53 20

					39 01 00 00 00 00 02 51 60

					05 01 00 00 05 00 02 29 00];

		qcom,mdss-dsi-off-command = [05 01 00 00 3c 00 02 28 00

					05 01 00 00 b4 00 02 10 00];

		qcom,mdss-dsi-on-command-state = "dsi_lp_mode";

		qcom,mdss-dsi-off-command-state = "dsi_hs_mode";

		qcom,mdss-dsi-h-sync-pulse = <0>;

		qcom,mdss-dsi-traffic-mode = "non_burst_sync_event";

		qcom,mdss-dsi-lane-map = "lane_map_0123";

		qcom,mdss-dsi-bllp-eof-power-mode;

		qcom,mdss-dsi-bllp-power-mode;

		qcom,mdss-dsi-tx-eot-append;

		qcom,dcs-cmd-by-left;

		qcom,mdss-dsi-lane-0-state;

		qcom,mdss-dsi-lane-1-state;

		qcom,mdss-dsi-lane-2-state;

		qcom,mdss-dsi-lane-3-state;

		qcom,mdss-dsi-wr-mem-start = <0x2c>;

		qcom,mdss-dsi-wr-mem-continue = <0x3c>;

		qcom,mdss-dsi-te-pin-select = <1>;

		qcom,mdss-dsi-te-dcs-command = <1>;

		qcom,mdss-dsi-te-check-enable;

		qcom,mdss-dsi-te-using-te-pin;

		qcom,mdss-dsi-panel-timings =

			[eb 38 26 00 6a 66 32 3c 2f 03 04 00];

		qcom,mdss-dsi-t-clk-post = <0x2c>;

		qcom,mdss-dsi-t-clk-pre = <0x1c>;

		qcom,mdss-dsi-dma-trigger = "trigger_sw";

		qcom,mdss-dsi-mdp-trigger = "none";

		qcom,mdss-dsi-lp11-init;

		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

		qcom,mdss-dsi-bl-min-level = <1>;

		qcom,mdss-dsi-bl-max-level = <255>;

		qcom,mdss-pan-physical-width-dimension = <68>;

		qcom,mdss-pan-physical-height-dimension = <122>;

		qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>;

	};

};