csiostor:Removed file csio_hw_t4.c

obj-$(CONFIG_SCSI_CHELSIO_FCOE) += csiostor.o

csiostor-objs := csio_attr.o csio_init.o csio_lnode.o csio_scsi.o \

		csio_hw.o csio_hw_t4.o csio_hw_t5.o csio_isr.o \

		csio_hw.o csio_hw_t5.o csio_isr.o \

		csio_mb.o csio_rnode.o csio_wr.o

/*

 * This file is part of the Chelsio FCoE driver for Linux.

 *

 * Copyright (c) 2008-2013 Chelsio Communications, Inc. All rights reserved.

 *

 * This software is available to you under a choice of one of two

 * licenses.  You may choose to be licensed under the terms of the GNU

 * General Public License (GPL) Version 2, available from the file

 * OpenIB.org BSD license below:

 *

 *     Redistribution and use in source and binary forms, with or

 *     without modification, are permitted provided that the following

 *     conditions are met:

 *

 *      - Redistributions of source code must retain the above

 *        copyright notice, this list of conditions and the following

 *      - Redistributions in binary form must reproduce the above

 *        copyright notice, this list of conditions and the following

 *        disclaimer in the documentation and/or other materials

 *        provided with the distribution.

 *

 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF

 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS

 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN

 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN

 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

 * SOFTWARE.

 */

#include "csio_hw.h"

#include "csio_init.h"

/*

 * Return the specified PCI-E Configuration Space register from our Physical

 * Function.  We try first via a Firmware LDST Command since we prefer to let

 * the firmware own all of these registers, but if that fails we go for it

 * directly ourselves.

 */

static uint32_t

csio_t4_read_pcie_cfg4(struct csio_hw *hw, int reg)

{

	u32 val = 0;

	struct csio_mb *mbp;

	int rv;

	struct fw_ldst_cmd *ldst_cmd;

	mbp = mempool_alloc(hw->mb_mempool, GFP_ATOMIC);

	if (!mbp) {

		CSIO_INC_STATS(hw, n_err_nomem);

		pci_read_config_dword(hw->pdev, reg, &val);

		return val;

	}

	csio_mb_ldst(hw, mbp, CSIO_MB_DEFAULT_TMO, reg);

	rv = csio_mb_issue(hw, mbp);

	/*

	 * If the LDST Command suucceeded, exctract the returned register

	 * value.  Otherwise read it directly ourself.

	 */

	if (rv == 0) {

		ldst_cmd = (struct fw_ldst_cmd *)(mbp->mb);

		val = ntohl(ldst_cmd->u.pcie.data[0]);

	} else

		pci_read_config_dword(hw->pdev, reg, &val);

	mempool_free(mbp, hw->mb_mempool);

	return val;

}

static int

csio_t4_set_mem_win(struct csio_hw *hw, uint32_t win)

{

	u32 bar0;

	u32 mem_win_base;

	/*

	 * Truncation intentional: we only read the bottom 32-bits of the

	 * 64-bit BAR0/BAR1 ...  We use the hardware backdoor mechanism to

	 * read BAR0 instead of using pci_resource_start() because we could be

	 * operating from within a Virtual Machine which is trapping our

	 * accesses to our Configuration Space and we need to set up the PCI-E

	 * Memory Window decoders with the actual addresses which will be

	 * coming across the PCI-E link.

	 */

	bar0 = csio_t4_read_pcie_cfg4(hw, PCI_BASE_ADDRESS_0);

	bar0 &= PCI_BASE_ADDRESS_MEM_MASK;

	mem_win_base = bar0 + MEMWIN_BASE;

	/*

	 * Set up memory window for accessing adapter memory ranges.  (Read

	 * back MA register to ensure that changes propagate before we attempt

	 * to use the new values.)

	 */

	csio_wr_reg32(hw, mem_win_base | BIR_V(0) |

			  WINDOW_V(ilog2(MEMWIN_APERTURE) - 10),

			  PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, win));

	csio_rd_reg32(hw,

		      PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, win));

	return 0;

}

/*

 * Interrupt handler for the PCIE module.

 */

static void

csio_t4_pcie_intr_handler(struct csio_hw *hw)

{

	static struct intr_info sysbus_intr_info[] = {

		{ RNPP_F, "RXNP array parity error", -1, 1 },

		{ RPCP_F, "RXPC array parity error", -1, 1 },

		{ RCIP_F, "RXCIF array parity error", -1, 1 },

		{ RCCP_F, "Rx completions control array parity error", -1, 1 },

		{ RFTP_F, "RXFT array parity error", -1, 1 },

		{ 0, NULL, 0, 0 }

	};

	static struct intr_info pcie_port_intr_info[] = {

		{ TPCP_F, "TXPC array parity error", -1, 1 },

		{ TNPP_F, "TXNP array parity error", -1, 1 },

		{ TFTP_F, "TXFT array parity error", -1, 1 },

		{ TCAP_F, "TXCA array parity error", -1, 1 },

		{ TCIP_F, "TXCIF array parity error", -1, 1 },

		{ RCAP_F, "RXCA array parity error", -1, 1 },

		{ OTDD_F, "outbound request TLP discarded", -1, 1 },

		{ RDPE_F, "Rx data parity error", -1, 1 },

		{ TDUE_F, "Tx uncorrectable data error", -1, 1 },

		{ 0, NULL, 0, 0 }

	};

	static struct intr_info pcie_intr_info[] = {

		{ MSIADDRLPERR_F, "MSI AddrL parity error", -1, 1 },

		{ MSIADDRHPERR_F, "MSI AddrH parity error", -1, 1 },

		{ MSIDATAPERR_F, "MSI data parity error", -1, 1 },

		{ MSIXADDRLPERR_F, "MSI-X AddrL parity error", -1, 1 },

		{ MSIXADDRHPERR_F, "MSI-X AddrH parity error", -1, 1 },

		{ MSIXDATAPERR_F, "MSI-X data parity error", -1, 1 },

		{ MSIXDIPERR_F, "MSI-X DI parity error", -1, 1 },

		{ PIOCPLPERR_F, "PCI PIO completion FIFO parity error", -1, 1 },

		{ PIOREQPERR_F, "PCI PIO request FIFO parity error", -1, 1 },

		{ TARTAGPERR_F, "PCI PCI target tag FIFO parity error", -1, 1 },

		{ CCNTPERR_F, "PCI CMD channel count parity error", -1, 1 },

		{ CREQPERR_F, "PCI CMD channel request parity error", -1, 1 },

		{ CRSPPERR_F, "PCI CMD channel response parity error", -1, 1 },

		{ DCNTPERR_F, "PCI DMA channel count parity error", -1, 1 },

		{ DREQPERR_F, "PCI DMA channel request parity error", -1, 1 },

		{ DRSPPERR_F, "PCI DMA channel response parity error", -1, 1 },

		{ HCNTPERR_F, "PCI HMA channel count parity error", -1, 1 },

		{ HREQPERR_F, "PCI HMA channel request parity error", -1, 1 },

		{ HRSPPERR_F, "PCI HMA channel response parity error", -1, 1 },

		{ CFGSNPPERR_F, "PCI config snoop FIFO parity error", -1, 1 },

		{ FIDPERR_F, "PCI FID parity error", -1, 1 },

		{ INTXCLRPERR_F, "PCI INTx clear parity error", -1, 1 },

		{ MATAGPERR_F, "PCI MA tag parity error", -1, 1 },

		{ PIOTAGPERR_F, "PCI PIO tag parity error", -1, 1 },

		{ RXCPLPERR_F, "PCI Rx completion parity error", -1, 1 },

		{ RXWRPERR_F, "PCI Rx write parity error", -1, 1 },

		{ RPLPERR_F, "PCI replay buffer parity error", -1, 1 },

		{ PCIESINT_F, "PCI core secondary fault", -1, 1 },

		{ PCIEPINT_F, "PCI core primary fault", -1, 1 },

		{ UNXSPLCPLERR_F, "PCI unexpected split completion error", -1,

		  0 },

		{ 0, NULL, 0, 0 }

	};

	int fat;

	fat = csio_handle_intr_status(hw,

				      PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS_A,

				      sysbus_intr_info) +

	      csio_handle_intr_status(hw,

				      PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS_A,

				      pcie_port_intr_info) +

	      csio_handle_intr_status(hw, PCIE_INT_CAUSE_A, pcie_intr_info);

	if (fat)

		csio_hw_fatal_err(hw);

}

/*

 * csio_t4_flash_cfg_addr - return the address of the flash configuration file

 * @hw: the HW module

 *

 * Return the address within the flash where the Firmware Configuration

 * File is stored.

 */

static unsigned int

csio_t4_flash_cfg_addr(struct csio_hw *hw)

{

	return FLASH_CFG_OFFSET;

}

/*

 *      csio_t4_mc_read - read from MC through backdoor accesses

 *      @hw: the hw module

 *      @idx: not used for T4 adapter

 *      @addr: address of first byte requested

 *      @data: 64 bytes of data containing the requested address

 *      @ecc: where to store the corresponding 64-bit ECC word

 *

 *      Read 64 bytes of data from MC starting at a 64-byte-aligned address

 *      that covers the requested address @addr.  If @parity is not %NULL it

 *      is assigned the 64-bit ECC word for the read data.

 */

static int

csio_t4_mc_read(struct csio_hw *hw, int idx, uint32_t addr, __be32 *data,

		uint64_t *ecc)

{

	int i;

	if (csio_rd_reg32(hw, MC_BIST_CMD_A) & START_BIST_F)

		return -EBUSY;

	csio_wr_reg32(hw, addr & ~0x3fU, MC_BIST_CMD_ADDR_A);

	csio_wr_reg32(hw, 64, MC_BIST_CMD_LEN_A);

	csio_wr_reg32(hw, 0xc, MC_BIST_DATA_PATTERN_A);

	csio_wr_reg32(hw, BIST_OPCODE_V(1) | START_BIST_F | BIST_CMD_GAP_V(1),

		      MC_BIST_CMD_A);

	i = csio_hw_wait_op_done_val(hw, MC_BIST_CMD_A, START_BIST_F,

				     0, 10, 1, NULL);

	if (i)

		return i;

#define MC_DATA(i) MC_BIST_STATUS_REG(MC_BIST_STATUS_RDATA_A, i)

	for (i = 15; i >= 0; i--)

		*data++ = htonl(csio_rd_reg32(hw, MC_DATA(i)));

	if (ecc)

		*ecc = csio_rd_reg64(hw, MC_DATA(16));

#undef MC_DATA

	return 0;

}

/*

 *      csio_t4_edc_read - read from EDC through backdoor accesses

 *      @hw: the hw module

 *      @idx: which EDC to access

 *      @addr: address of first byte requested

 *      @data: 64 bytes of data containing the requested address

 *      @ecc: where to store the corresponding 64-bit ECC word

 *

 *      Read 64 bytes of data from EDC starting at a 64-byte-aligned address

 *      that covers the requested address @addr.  If @parity is not %NULL it

 *      is assigned the 64-bit ECC word for the read data.

 */

static int

csio_t4_edc_read(struct csio_hw *hw, int idx, uint32_t addr, __be32 *data,

		uint64_t *ecc)

{

	int i;

	idx *= EDC_STRIDE;

	if (csio_rd_reg32(hw, EDC_BIST_CMD_A + idx) & START_BIST_F)

		return -EBUSY;

	csio_wr_reg32(hw, addr & ~0x3fU, EDC_BIST_CMD_ADDR_A + idx);

	csio_wr_reg32(hw, 64, EDC_BIST_CMD_LEN_A + idx);

	csio_wr_reg32(hw, 0xc, EDC_BIST_DATA_PATTERN_A + idx);

	csio_wr_reg32(hw, BIST_OPCODE_V(1) | BIST_CMD_GAP_V(1) | START_BIST_F,

		      EDC_BIST_CMD_A + idx);

	i = csio_hw_wait_op_done_val(hw, EDC_BIST_CMD_A + idx, START_BIST_F,

				     0, 10, 1, NULL);

	if (i)

		return i;

#define EDC_DATA(i) (EDC_BIST_STATUS_REG(EDC_BIST_STATUS_RDATA_A, i) + idx)

	for (i = 15; i >= 0; i--)

		*data++ = htonl(csio_rd_reg32(hw, EDC_DATA(i)));

	if (ecc)

		*ecc = csio_rd_reg64(hw, EDC_DATA(16));

#undef EDC_DATA

	return 0;

}

/*

 * csio_t4_memory_rw - read/write EDC 0, EDC 1 or MC via PCIE memory window

 * @hw: the csio_hw

 * @win: PCI-E memory Window to use

 * @mtype: memory type: MEM_EDC0, MEM_EDC1, MEM_MC0 (or MEM_MC) or MEM_MC1

 * @addr: address within indicated memory type

 * @len: amount of memory to transfer

 * @buf: host memory buffer

 * @dir: direction of transfer 1 => read, 0 => write

 *

 * Reads/writes an [almost] arbitrary memory region in the firmware: the

 * firmware memory address, length and host buffer must be aligned on

 * 32-bit boudaries.  The memory is transferred as a raw byte sequence

 * from/to the firmware's memory.  If this memory contains data

 * structures which contain multi-byte integers, it's the callers

 * responsibility to perform appropriate byte order conversions.

 */

static int

csio_t4_memory_rw(struct csio_hw *hw, u32 win, int mtype, u32 addr,

		u32 len, uint32_t *buf, int dir)

{

	u32 pos, start, offset, memoffset, bar0;

	u32 edc_size, mc_size, mem_reg, mem_aperture, mem_base;

	/*

	 * Argument sanity checks ...

	 */

	if ((addr & 0x3) || (len & 0x3))

		return -EINVAL;

	/* Offset into the region of memory which is being accessed

	 * MEM_EDC0 = 0

	 * MEM_EDC1 = 1

	 * MEM_MC   = 2 -- T4

	 */

	edc_size  = EDRAM0_SIZE_G(csio_rd_reg32(hw, MA_EDRAM0_BAR_A));

	if (mtype != MEM_MC1)

		memoffset = (mtype * (edc_size * 1024 * 1024));

	else {

		mc_size = EXT_MEM_SIZE_G(csio_rd_reg32(hw,

						       MA_EXT_MEMORY_BAR_A));

		memoffset = (MEM_MC0 * edc_size + mc_size) * 1024 * 1024;

	}

	/* Determine the PCIE_MEM_ACCESS_OFFSET */

	addr = addr + memoffset;

	/*

	 * Each PCI-E Memory Window is programmed with a window size -- or

	 * "aperture" -- which controls the granularity of its mapping onto

	 * adapter memory.  We need to grab that aperture in order to know

	 * how to use the specified window.  The window is also programmed

	 * with the base address of the Memory Window in BAR0's address

	 * space.  For T4 this is an absolute PCI-E Bus Address.  For T5

	 * the address is relative to BAR0.

	 */

	mem_reg = csio_rd_reg32(hw,

			PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, win));

	mem_aperture = 1 << (WINDOW_V(mem_reg) + 10);

	mem_base = PCIEOFST_G(mem_reg) << 10;

	bar0 = csio_t4_read_pcie_cfg4(hw, PCI_BASE_ADDRESS_0);

	bar0 &= PCI_BASE_ADDRESS_MEM_MASK;

	mem_base -= bar0;

	start = addr & ~(mem_aperture-1);

	offset = addr - start;

	csio_dbg(hw, "csio_t4_memory_rw: mem_reg: 0x%x, mem_aperture: 0x%x\n",

		 mem_reg, mem_aperture);

	csio_dbg(hw, "csio_t4_memory_rw: mem_base: 0x%x, mem_offset: 0x%x\n",

		 mem_base, memoffset);

	csio_dbg(hw, "csio_t4_memory_rw: bar0: 0x%x, start:0x%x, offset:0x%x\n",

		 bar0, start, offset);

	csio_dbg(hw, "csio_t4_memory_rw: mtype: %d, addr: 0x%x, len: %d\n",

		 mtype, addr, len);

	for (pos = start; len > 0; pos += mem_aperture, offset = 0) {

		/*

		 * Move PCI-E Memory Window to our current transfer

		 * position.  Read it back to ensure that changes propagate

		 * before we attempt to use the new value.

		 */

		csio_wr_reg32(hw, pos,

			PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET_A, win));

		csio_rd_reg32(hw,

			PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET_A, win));

		while (offset < mem_aperture && len > 0) {

			if (dir)

				*buf++ = csio_rd_reg32(hw, mem_base + offset);

			else

				csio_wr_reg32(hw, *buf++, mem_base + offset);

			offset += sizeof(__be32);

			len -= sizeof(__be32);

		}

	}

	return 0;

}

/*

 * csio_t4_dfs_create_ext_mem - setup debugfs for MC to read the values

 * @hw: the csio_hw

 *

 * This function creates files in the debugfs with external memory region MC.

 */

static void

csio_t4_dfs_create_ext_mem(struct csio_hw *hw)

{

	u32 size;

	int i = csio_rd_reg32(hw, MA_TARGET_MEM_ENABLE_A);

	if (i & EXT_MEM_ENABLE_F) {

		size = csio_rd_reg32(hw, MA_EXT_MEMORY_BAR_A);

		csio_add_debugfs_mem(hw, "mc", MEM_MC,

				     EXT_MEM_SIZE_G(size));

	}

}

/* T4 adapter specific function */

struct csio_hw_chip_ops t4_ops = {

	.chip_set_mem_win		= csio_t4_set_mem_win,

	.chip_pcie_intr_handler		= csio_t4_pcie_intr_handler,

	.chip_flash_cfg_addr		= csio_t4_flash_cfg_addr,

	.chip_mc_read			= csio_t4_mc_read,

	.chip_edc_read			= csio_t4_edc_read,

	.chip_memory_rw			= csio_t4_memory_rw,

	.chip_dfs_create_ext_mem	= csio_t4_dfs_create_ext_mem,

};