Merge "ARM: dts: msm: Add HDR support for NT35597 panel" (b9bdafe1) · Commits · e / devices / android_kernel_sony_msm8998

Documentation/devicetree/bindings/fb/mdss-dsi-panel.txt

+22 −0

Original line number	Diff line number	Diff line
		@@ -365,6 +365,28 @@ the fps window.
		2A/2B command.
		- qcom,dcs-cmd-by-left: Boolean to indicate that dcs command are sent
		through the left DSI controller only in a dual-dsi configuration
		- qcom,mdss-dsi-panel-hdr-enabled: Boolean to indicate HDR support in panel.
		- qcom,mdss-dsi-panel-hdr-color-primaries:
		Array of 8 unsigned integers denoting chromaticity of panel.These
		values are specified in nits units. The value range is 0 through 50000.
		To obtain real chromacity, these values should be divided by factor of
		50000. The structure of array is defined in below order
		value 1: x value of white chromaticity of display panel
		value 2: y value of white chromaticity of display panel
		value 3: x value of red chromaticity of display panel
		value 4: y value of red chromaticity of display panel
		value 5: x value of green chromaticity of display panel
		value 6: y value of green chromaticity of display panel
		value 7: x value of blue chromaticity of display panel
		value 8: y value of blue chromaticity of display panel
		- qcom,mdss-dsi-panel-peak-brightness: Maximum brightness supported by panel.In absence of maximum value
		typical value becomes peak brightness. Value is specified in nits units.
		To obtail real peak brightness, this value should be divided by factor of
		10000.
		- qcom,mdss-dsi-panel-blackness-level: Blackness level supported by panel. Blackness level is defined as
		ratio of peak brightness to contrast. Value is specified in nits units.
		To obtail real blackness level, this value should be divided by factor of
		10000.
		- qcom,mdss-dsi-lp11-init: Boolean used to enable the DSI clocks and data lanes (low power 11)
		before issuing hardware reset line.
		- qcom,mdss-dsi-init-delay-us: Delay in microseconds(us) before performing any DSI activity in lp11

arch/arm/boot/dts/qcom/dsi-panel-nt35597-dsc-wqxga-cmd.dtsi

+5 −1

Original line number	Diff line number	Diff line
		@@ -53,7 +53,11 @@
		qcom,mdss-dsi-te-check-enable;
		qcom,mdss-dsi-te-using-te-pin;
		qcom,ulps-enabled;

		qcom,mdss-dsi-panel-hdr-enabled;
		qcom,mdss-dsi-panel-hdr-color-primaries = <14500 15500 32000
		17000 15500 30000 8000 3000>;
		qcom,mdss-dsi-panel-peak-brightness = <4200000>;
		qcom,mdss-dsi-panel-blackness-level = <3230>;
		qcom,adjust-timer-wakeup-ms = <1>;
		qcom,mdss-dsi-on-command = [15 01 00 00 00 00 02 ff 10
		15 01 00 00 00 00 02 fb 01

arch/arm/boot/dts/qcom/dsi-panel-nt35597-dsc-wqxga-video.dtsi

+5 −1

Original line number	Diff line number	Diff line
		@@ -29,7 +29,11 @@
		qcom,mdss-dsi-bpp = <24>;
		qcom,mdss-dsi-underflow-color = <0xff>;
		qcom,mdss-dsi-border-color = <0>;

		qcom,mdss-dsi-panel-hdr-enabled;
		qcom,mdss-dsi-panel-hdr-color-primaries = <14500 15500 32000
		17000 15500 30000 8000 3000>;
		qcom,mdss-dsi-panel-peak-brightness = <4200000>;
		qcom,mdss-dsi-panel-blackness-level = <3230>;
		qcom,mdss-dsi-on-command = [15 01 00 00 00 00 02 ff 10
		15 01 00 00 00 00 02 fb 01
		15 01 00 00 00 00 02 ba 03

arch/arm/boot/dts/qcom/dsi-panel-nt35597-dualmipi-wqxga-cmd.dtsi

+5 −0

Original line number	Diff line number	Diff line
		@@ -61,6 +61,11 @@
		qcom,mdss-dsi-te-check-enable;
		qcom,mdss-dsi-te-using-te-pin;
		qcom,ulps-enabled;
		qcom,mdss-dsi-panel-hdr-enabled;
		qcom,mdss-dsi-panel-hdr-color-primaries = <14500 15500 32000
		17000 15500 30000 8000 3000>;
		qcom,mdss-dsi-panel-peak-brightness = <4200000>;
		qcom,mdss-dsi-panel-blackness-level = <3230>;
		qcom,mdss-dsi-on-command = [15 01 00 00 00 00 02 ff 10
		15 01 00 00 00 00 02 fb 01
		15 01 00 00 00 00 02 ba 03

arch/arm/boot/dts/qcom/dsi-panel-nt35597-dualmipi-wqxga-video.dtsi

+5 −0

Original line number	Diff line number	Diff line
		@@ -29,6 +29,11 @@
		qcom,mdss-dsi-bpp = <24>;
		qcom,mdss-dsi-underflow-color = <0xff>;
		qcom,mdss-dsi-border-color = <0>;
		qcom,mdss-dsi-panel-hdr-enabled;
		qcom,mdss-dsi-panel-hdr-color-primaries = <14500 15500 32000
		17000 15500 30000 8000 3000>;
		qcom,mdss-dsi-panel-peak-brightness = <4200000>;
		qcom,mdss-dsi-panel-blackness-level = <3230>;
		qcom,mdss-dsi-on-command = [15 01 00 00 00 00 02 ff 10
		15 01 00 00 00 00 02 fb 01
		15 01 00 00 00 00 02 ba 03