Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 92096aa3 authored by Kui Wang's avatar Kui Wang Committed by Gerrit - the friendly Code Review server
Browse files

ARM: dts: msm: Add camera dtsi for sdm660 qrd 



Add camera related device nodes for sdm660 qrd.
That includes front/rear/aux sensor device nodes, and
corresponding eeprom/actuator/ois device nodes.

Change-Id: I67bcbd96f87e4d362b130e323f0fcc71642fa5a4
Signed-off-by: default avatarKui Wang <kuiw@codeaurora.org>
parent 2f817b68

arch/arm/boot/dts/qcom/sdm660-camera-sensor-qrd.dtsi

0 → 100644
+426 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2017, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&soc {

	led_flash0: qcom,camera-flash@0 {

		cell-index = <0>;

		compatible = "qcom,camera-flash";

		qcom,flash-source = <&pm660l_flash0 &pm660l_flash1>;

		qcom,torch-source = <&pm660l_torch0 &pm660l_torch1>;

		qcom,switch-source = <&pm660l_switch0>;

		status = "ok";

	};



	cam_avdd_gpio_regulator:fixed_regulator@1 {

		compatible = "regulator-fixed";

		regulator-name = "cam_vadd_gpio_regulator";

		regulator-min-microvolt = <2800000>;

		regulator-max-microvolt = <2800000>;

		enable-active-high;

		gpio = <&tlmm 51 0>;

		vin-supply = <&pm660l_bob>;

	};



	cam_dvdd_gpio_regulator:fixed_regulator@1 {

		compatible = "regulator-fixed";

		regulator-name = "cam_vadd_gpio_regulator";

		regulator-min-microvolt = <1050000>;

		regulator-max-microvolt = <1050000>;

		enable-active-high;

		gpio = <&pm660l_gpios 4>;

		vin-supply = <&pm660_s5>;

	};



	cam_vaf_gpio_regulator:fixed_regulator@2 {

		compatible = "regulator-fixed";

		regulator-name = "cam_vaf_gpio_regulator";

		regulator-min-microvolt = <2800000>;

		regulator-max-microvolt = <2800000>;

		enable-active-high;

		gpio = <&tlmm 50 0>;

		vin-supply = <&pm660l_bob>;

	};

};



&tlmm {

	cam_sensor_rear_active: cam_sensor_rear_active {

		/* RESET */

		mux {

			pins = "gpio46";

			function = "gpio";

		};



		config {

			pins = "gpio46";

			bias-disable; /* No PULL */

			drive-strength = <2>; /* 2 MA */

		};

	};



	cam_sensor_rear_suspend: cam_sensor_rear_suspend {

		/* RESET */

		mux {

			pins = "gpio46";

			function = "gpio";

		};



		config {

			pins = "gpio46";

			bias-disable; /* No PULL */

			drive-strength = <2>; /* 2 MA */

		};

	};



	cam_sensor_rear2_active: cam_sensor_rear2_active {

		/* RESET */

		mux {

			pins = "gpio48";

			function = "gpio";

		};



		config {

			pins = "gpio48";

			bias-disable; /* No PULL */

			drive-strength = <2>; /* 2 MA */

		};

	};



	cam_sensor_rear2_suspend: cam_sensor_rear2_suspend {

		/* RESET */

		mux {

			pins = "gpio48";

			function = "gpio";

		};



		config {

			pins = "gpio48";

			bias-disable; /* No PULL */

			drive-strength = <2>; /* 2 MA */

		};

	};



	cam_sensor_front_active: cam_sensor_front_active {

		/* RESET */

		mux {

			pins = "gpio47";

			function = "gpio";

		};



		config {

			pins = "gpio47";

			bias-disable; /* No PULL */

			drive-strength = <2>; /* 2 MA */

		};

	};



	cam_sensor_front_suspend: cam_sensor_front_suspend {

		/* RESET */

		mux {

			pins = "gpio47";

			function = "gpio";

		};



		config {

			pins = "gpio47";

			bias-disable; /* No PULL */

			drive-strength = <2>; /* 2 MA */

		};

	};

};



&cci {

	actuator0: qcom,actuator@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

		cam_vaf-supply = <&cam_vaf_gpio_regulator>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2800000>;

		qcom,cam-vreg-max-voltage = <2800000>;

		qcom,cam-vreg-op-mode = <0>;

	};



	actuator1: qcom,actuator@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

		cam_vaf-supply = <&cam_vaf_gpio_regulator>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2800000>;

		qcom,cam-vreg-max-voltage = <2800000>;

		qcom,cam-vreg-op-mode = <0>;

	};



	ois0: qcom,ois@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,ois";

		qcom,cci-master = <0>;

		cam_vaf-supply = <&cam_vaf_gpio_regulator>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2800000>;

		qcom,cam-vreg-max-voltage = <2800000>;

		qcom,cam-vreg-op-mode = <0>;

		status = "disabled";

	};



	eeprom0: qcom,eeprom@0 {

		cell-index = <0>;

		reg = <0>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm660_l11>;

		cam_vana-supply = <&cam_avdd_gpio_regulator>;

		cam_vdig-supply = <&cam_dvdd_gpio_regulator>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <1750000 0 0>;

		qcom,cam-vreg-max-voltage = <1980000 0 0>;

		qcom,cam-vreg-op-mode = <105000 0 0>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_rear_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_rear_suspend>;

		gpios = <&tlmm 32 0>,

			<&tlmm 46 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-req-tbl-num = <0 1>;

		qcom,gpio-req-tbl-flags = <1 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_mmss MCLK0_CLK_SRC>,

				<&clock_mmss MMSS_CAMSS_MCLK0_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	eeprom1: qcom,eeprom@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm660_l11>;

		cam_vana-supply = <&cam_avdd_gpio_regulator>;

		cam_vdig-supply = <&cam_dvdd_gpio_regulator>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <1750000 0 0>;

		qcom,cam-vreg-max-voltage = <1980000 0 0>;

		qcom,cam-vreg-op-mode = <105000 0 0>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

				 &cam_sensor_rear2_active>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

				 &cam_sensor_rear2_suspend>;

		gpios = <&tlmm 34 0>,

			<&tlmm 48 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-req-tbl-num = <0 1>;

		qcom,gpio-req-tbl-flags = <1 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

					  "CAM_RESET1";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_mmss MCLK2_CLK_SRC>,

		    <&clock_mmss MMSS_CAMSS_MCLK2_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	eeprom2: qcom,eeprom@2 {

		cell-index = <2>;

		reg = <0x2>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm660_l11>;

		cam_vana-supply = <&cam_avdd_gpio_regulator>;

		cam_vdig-supply = <&pm660_s5>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <1780000 0 1352000>;

		qcom,cam-vreg-max-voltage = <1950000 0 1352000>;

		qcom,cam-vreg-op-mode = <105000 0 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_front_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				 &cam_sensor_front_suspend>;

		gpios = <&tlmm 33 0>,

			<&tlmm 47 0>,

			<&pm660l_gpios 3 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vdig = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2",

					"CAM_VDIG";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_mmss MCLK1_CLK_SRC>,

			<&clock_mmss MMSS_CAMSS_MCLK1_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	qcom,camera@0 {

		cell-index = <0>;

		compatible = "qcom,camera";

		reg = <0x0>;

		qcom,csiphy-sd-index = <0>;

		qcom,csid-sd-index = <0>;

		qcom,mount-angle = <90>;

		qcom,led-flash-src = <&led_flash0>;

		qcom,actuator-src = <&actuator0>;

		qcom,ois-src = <&ois0>;

		qcom,eeprom-src = <&eeprom0>;

		cam_vio-supply = <&pm660_l11>;

		cam_vana-supply = <&cam_avdd_gpio_regulator>;

		cam_vdig-supply = <&cam_dvdd_gpio_regulator>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <1780000 0 0>;

		qcom,cam-vreg-max-voltage = <1950000 0 0>;

		qcom,cam-vreg-op-mode = <105000 0 0>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				 &cam_sensor_rear_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				 &cam_sensor_rear_suspend>;

		gpios = <&tlmm 32 0>,

			<&tlmm 46 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-req-tbl-num = <0 1>;

		qcom,gpio-req-tbl-flags = <1 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET0";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_mmss MCLK0_CLK_SRC>,

				<&clock_mmss MMSS_CAMSS_MCLK0_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	qcom,camera@1 {

		cell-index = <1>;

		compatible = "qcom,camera";

		reg = <0x1>;

		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <1>;

		qcom,mount-angle = <90>;

		qcom,actuator-src = <&actuator1>;

		qcom,eeprom-src = <&eeprom1>;

		cam_vio-supply = <&pm660_l11>;

		cam_vana-supply = <&cam_avdd_gpio_regulator>;

		cam_vdig-supply = <&cam_dvdd_gpio_regulator>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <1780000 0 0>;

		qcom,cam-vreg-max-voltage = <1950000 0 0>;

		qcom,cam-vreg-op-mode = <105000 0 0>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

				 &cam_sensor_rear2_active>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

				 &cam_sensor_rear2_suspend>;

		gpios = <&tlmm 34 0>,

			<&tlmm 48 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-req-tbl-num = <0 1>;

		qcom,gpio-req-tbl-flags = <1 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

					  "CAM_RESET1";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_mmss MCLK2_CLK_SRC>,

			<&clock_mmss MMSS_CAMSS_MCLK2_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	qcom,camera@2 {

		cell-index = <2>;

		compatible = "qcom,camera";

		reg = <0x02>;

		qcom,csiphy-sd-index = <2>;

		qcom,csid-sd-index = <2>;

		qcom,mount-angle = <270>;

		qcom,eeprom-src = <&eeprom2>;

		cam_vio-supply = <&pm660_l11>;

		cam_vana-supply = <&cam_avdd_gpio_regulator>;

		cam_vdig-supply = <&pm660_s5>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <1780000 0 1350000>;

		qcom,cam-vreg-max-voltage = <1950000 0 1350000>;

		qcom,cam-vreg-op-mode = <105000 0 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_front_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				 &cam_sensor_front_suspend>;

		gpios = <&tlmm 33 0>,

			<&tlmm 47 0>,

			<&pm660l_gpios 3 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vdig = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2",

					"CAM_VDIG";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_mmss MCLK1_CLK_SRC>,

			<&clock_mmss MMSS_CAMSS_MCLK1_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};

};



&pm660l_gpios {

	gpio@c300 { /* GPIO4 -CAMERA SENSOR 0 VDIG*/

		qcom,mode = <1>;                /* Output */

		qcom,pull = <5>;                /* No Pull */

		qcom,vin-sel = <0>;             /* VIN1 GPIO_LV */

		qcom,src-sel = <0>;             /* GPIO */

		qcom,invert = <0>;              /* Invert */

		qcom,master-en = <1>;           /* Enable GPIO */

		status = "ok";

	};



	gpio@c200 { /* GPIO3 -CAMERA SENSOR 2 VDIG*/

		qcom,mode = <1>;                /* Output */

		qcom,pull = <5>;                /* No Pull */

		qcom,vin-sel = <0>;             /* VIN1 GPIO_LV */

		qcom,src-sel = <0>;             /* GPIO */

		qcom,invert = <0>;              /* Invert */

		qcom,master-en = <1>;           /* Enable GPIO */

		status = "ok";

	};

};

arch/arm/boot/dts/qcom/sdm660-qrd.dtsi

+2 −1
Original line number Diff line number Diff line 
/* Copyright (c) 2016, The Linux Foundation. All rights reserved.

/* Copyright (c) 2016-2017, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and
@@ -11,6 +11,7 @@ 
 */



#include "sdm660-pinctrl.dtsi"

#include "sdm660-camera-sensor-qrd.dtsi"

/ {

};