Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 901178c7 authored by Puneet Yatnal's avatar Puneet Yatnal Committed by Gerrit - the friendly Code Review server
Browse files

Revert "ARM: dts: msm: Enabled dt entry for bmi160 and iam20680" 



BMI160 and IAM20680 sensor driver was used in automotive platform for
dead reckoning solution, reverting the change since QDR no longer
required.

This reverts commit b7d92272196b67b22a2aeda2080efe268e3609ab.

Change-Id: Id5e41b0fa7f0a145c40e01d1cc9a3869f4688b9a
Signed-off-by: default avatarPuneet Yatnal <puneet@codeaurora.org>
parent c434e971

Documentation/devicetree/bindings/vendor-prefixes.txt

+0 −2
Original line number Diff line number Diff line
@@ -259,8 +259,6 @@ xes Extreme Engineering Solutions (X-ES) 
xillybus	Xillybus Ltd.

xlnx	Xilinx

zyxel	ZyXEL Communications Corp.

bosch-sensortec»    Bosch Sensortec GmbH

inven   InvenSense, Inc.

zarlink	Zarlink Semiconductor

zii	Zodiac Inflight Innovations

zte	ZTE Corp.

arch/arm/boot/dts/qcom/msm8996-agave-adp.dtsi

+0 −35
Original line number Diff line number Diff line
@@ -1536,41 +1536,6 @@ 
	};

};



&i2c_10 {

	 bmi160@68 {

		compatible = "bosch-sensortec,bmi160";

		reg = <0x68>;

		vdd-supply = <&pm8994_lvs2>;

		vio-supply = <&pm8994_lvs2>;

		pinctrl-names = "default";

		pinctrl-0 = <&sensor_int1_default &sensor_int2_default>;

		interrupt-parent = <&tlmm>;

		interrupts = <117 0x2002>;

		bmi,init-interval = <200>;

		bmi,place = <1>;

		bmi,gpio_irq = <&tlmm 117 0x2002>;

	};

	 iam20680@69 {

		 compatible = "inven,iam20680";

		 reg = <0x69>;

		 vdd-supply = <&pm8994_lvs2>;

		 vio-supply = <&pm8994_lvs2>;

		 pinctrl-names = "default";

		 pinctrl-0 = <&sensor_int1_default &sensor_int2_default>;

		 interrupt-parent = <&tlmm>;

		 interrupts = <118 IRQ_TYPE_EDGE_RISING>;

		 axis_map_x = <1>;

		 axis_map_y = <0>;

		 axis_map_z = <2>;

		 negate_x = <1>;

		 negate_y = <0>;

		 negate_z = <0>;

		 inven,secondary_type = "none";

		 inven,aux_type = "none";

		 inven,read_only_slave_type = "none";

	 };

};



&dsi_dual_jdi_video {

	/delete-property/ pwms;

	/delete-property/ qcom,5v-boost-gpio;

arch/arm/boot/dts/qcom/msm8996-pinctrl.dtsi

+0 −52
Original line number Diff line number Diff line
@@ -850,58 +850,6 @@ 
				};

			};

		};

		i2c_10 {

			i2c_10_active: i2c_10_active {

				mux {

					pins = "gpio10", "gpio11";

					function = "blsp_i2c10";

				};



				config {

					pins = "gpio10", "gpio11";

					drive-strength = <16>;

					bias-pull-up;

				};

			};



			i2c_10_sleep: i2c_10_sleep {

				mux {

					pins = "gpio10", "gpio11";

					function = "blsp_i2c10";

				};



				config {

					pins = "gpio10", "gpio11";

					drive-strength = <16>;

					bias-pull-up;

				};

			};

		};



		sensor_int1_default: sensor_int1_default {

			mux {

				pins = "gpio117";

				function = "gpio";

			};



			config {

				pins = "gpio117";

				drive-strength = <16>; /* 16 mA */

				bias-pull-down; /* pull down */

			};

		};

		sensor_int2_default: sensor_int2_default {

			mux {

				pins = "gpio118";

				function = "gpio";

			};



			config {

				pins = "gpio118";

				drive-strength = <16>; /* 16 mA */

				bias-pull-down; /* pull down */

			};

		};



		pmx_fm_int {

			fm_int_active: fm_int_active {

arch/arm/boot/dts/qcom/msm8996.dtsi

+0 −23
Original line number Diff line number Diff line
@@ -39,7 +39,6 @@ 
		i2c6 = &i2c_6;

		i2c7 = &i2c_7;

		i2c8 = &i2c_8;

		i2c10 = &i2c_10;

		i2c12 = &i2c_12;

		spi0 = &spi_0;

		serial0 = &uartblsp2dm1;
@@ -388,28 +387,6 @@ 
		clock-names = "core_clk", "iface_clk";

	};



	i2c_10: i2c@75b8000 { /* BLSP2 QUP4 */

		compatible = "qcom,i2c-msm-v2";

		#address-cells = <1>;

		#size-cells = <0>;

		reg-names = "qup_phys_addr";

		reg = <0x75b8000 0x600>;

		interrupt-names = "qup_irq";

		interrupts = <0 104 0>;

		dmas = <&dma_blsp2 18 32 0x20000020 0x20>,

		<&dma_blsp2 19 32 0x20000020 0x20>;

		dma-names = "tx", "rx";

		qcom,master-id = <84>;

		qcom,clk-freq-out = <400000>;

		qcom,clk-freq-in  = <19200000>;

		clock-names = "iface_clk", "core_clk";

		clocks = <&clock_gcc clk_gcc_blsp2_ahb_clk>,

		<&clock_gcc clk_gcc_blsp2_qup4_i2c_apps_clk>;

		pinctrl-names = "i2c_active", "i2c_sleep";

		pinctrl-0 = <&i2c_10_active>;

		pinctrl-1 = <&i2c_10_sleep>;

	};



	i2c_12: i2c@75ba000 {

		compatible = "qcom,i2c-msm-v2";

		#address-cells = <1>;