Loading arch/arm/boot/dts/qcom/Makefile +1 −0 Original line number Diff line number Diff line Loading @@ -32,6 +32,7 @@ dtb-$(CONFIG_ARCH_MSM8996) += msm8996-v2-pmi8994-cdp.dtb \ msm8996pro-auto-adp.dtb \ msm8996pro-auto-adp-lite.dtb \ msm8996pro-auto-cdp.dtb \ msm8996pro-auto-cv2x.dtb \ msm8996pro-pmi8994-cdp.dtb \ msm8996pro-pmi8994-mtp.dtb \ msm8996pro-pmi8994-pmk8001-cdp.dtb \ Loading arch/arm/boot/dts/qcom/msm8996-cv2x.dtsi 0 → 100644 +641 −0 Original line number Diff line number Diff line /* Copyright (c) 2017, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include "msm8996-pinctrl.dtsi" #include "external-soc.dtsi" / { reserved-memory { lk_mem: lk_pool@91600000 { reg = <0x0 0x91600000 0x0 0x600000>; label = "lk_pool"; }; }; aliases { mhi_rmnet0 = &mhi_rmnet_0; mhi_rmnet1 = &mhi_rmnet_1; mhi_uci0 = &mhi_uci; mhi0 = &mhi; }; gpio-leds { compatible = "gpio-leds"; status { gpios = <&tlmm 21 0>; default-state = "on"; }; }; pps { compatible = "pps-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pmx_pps>; gpios = <&tlmm 22 0>; status = "okay"; }; }; &soc { /delete-node/ sound-9335; qcom,ntn_avb { compatible = "qcom,ntn_avb"; vdd-ntn-pci-supply = <&ntn_vreg>; vdd-ntn-io-supply = <&ntn_vreg>; qcom,ntn-rst-delay-msec = <100>; qcom,ntn-rc-num = <1>; qcom,ntn-bus-num = <1>; qcom,ntn-mdio-bus-id = <1>; qcom,ntn-phy-addr = <7>; qcom,msm-bus,name = "ntn"; qcom,msm-bus,num-cases = <2>; qcom,msm-bus,num-paths = <1>; qcom,msm-bus,vectors-KBps = <100 512 0 0>, <100 512 207108 14432000>; }; usb_detect: usb_detect { compatible = "qcom,gpio-usbdetect"; qcom,vbus-det-gpio = <&pm8994_gpios 17 0>; interrupt-parent = <&spmi_bus>; interrupts = <0x0 0x9 0x0 IRQ_TYPE_NONE>; interrupt-names ="pmic_id_irq"; }; qcom,cnss { vdd-wlan-en-supply = <&wlan_en_vreg>; qcom,wlan-en-vreg-support; /delete-property/ wlan-en-gpio; /delete-property/ wlan-bootstrap-gpio; /delete-property/ vdd-wlan-core-supply; }; qcom,cnss_sdio { compatible = "qcom,cnss_sdio"; subsys-name = "AR6320_SDIO"; vdd-wlan-supply = <&rome_vreg>; vdd-wlan-xtal-supply = <&pm8994_l30>; vdd-wlan-io-supply = <&pm8994_s4>; vdd-wlan-dsrc-supply = <&dsrc_vreg>; qcom,wlan-ramdump-dynamic = <0x200000>; qcom,skip-wlan-en-toggle; }; ntn_vreg: regulator-ntn-tps65051 { compatible = "regulator-fixed"; regulator-name = "ntn_vreg"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; startup-delay-us = <920>; gpio = <&tlmm 138 0>; enable-active-high; }; eth_phy_vreg: regulator-eth-phy-tps65051 { compatible = "regulator-fixed"; regulator-name = "eth_phy_vreg"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; startup-delay-us = <920>; gpio = <&tlmm 136 0>; enable-active-high; regulator-always-on; }; hsm_vreg: regulator-hsm-tps22966 { compatible = "regulator-fixed"; regulator-name = "hsm_vreg"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; startup-delay-us = <2410>; gpio = <&tlmm 81 0>; enable-active-high; regulator-always-on; }; dsrc_vreg: dsrc_vreg { compatible = "regulator-fixed"; regulator-name = "dsrc_vreg"; startup-delay-us = <2410>; enable-active-high; gpio = <&tlmm 125 0>; }; mhi_rmnet_0: qcom,mhi-rmnet@0 { compatible = "qcom,mhi-rmnet"; cell-index = <0>; qcom,mhi = <&mhi>; qcom,mhi-rx-channel = <101>; qcom,mhi-tx-channel = <100>; qcom,mhi-mru = <0x4000>; status = "okay"; }; mhi_rmnet_1: qcom,mhi-rmnet@1 { compatible = "qcom,mhi-rmnet"; cell-index = <1>; qcom,mhi = <&mhi>; qcom,mhi-rx-channel = <47>; qcom,mhi-tx-channel = <46>; qcom,mhi-mru = <0x4000>; qcom,interface-name = "mhi_swip"; status = "okay"; }; mhi_uci: qcom,mhi-uci { compatible = "qcom,mhi-uci"; qcom,mhi-uci-channels = <0 0xffff>, <1 0x1000>, <2 0xffff>, <3 0xffff>, <10 0xffff>, <11 0x1000>, <14 0xffff>, <15 0x1000>, <16 0xffff>, <17 0x1000>, <18 0xffff>, <19 0x1000>, <22 0xffff>, <23 0x1000>, <24 0xffff>, <25 0x1000>, <32 0xffff>, <33 0x1000>; qcom,mhi-uci-ctrlchan = <18>; qcom,mhi = <&mhi>; status = "okay"; }; }; /delete-node/ &sde_kms; /delete-node/ &sde_dsi0; /delete-node/ &sde_dsi1; /delete-node/ &sde_dsi_phy0; /delete-node/ &sde_dsi_phy1; /delete-node/ &sde_hdmi_tx; /delete-node/ &mdss_mdp; /delete-node/ &mdss_dsi; /delete-node/ &msm_ext_disp; /delete-node/ &mdss_hdmi_tx; /delete-node/ &mdss_rotator; /delete-node/ &routing; &pil_modem { status = "disabled"; }; &pm8994_l9 { regulator-always-on; }; &pm8994_l10 { regulator-always-on; }; &wlan_en_vreg { status = "okay"; }; &i2c_12 { status = "disabled"; }; &spi_9 { status = "okay"; /* CAN controller */ spi@0 { compatible = "nxp,mpc57xx"; reg = <0>; spi-max-frequency = <19200000>; }; }; &spi_12 { status = "okay"; /* HSM module */ spi@0 { compatible = "infineon,sli97"; reg = <0>; spi-max-frequency = <4800000>; }; }; &ufs_ice { status = "okay"; }; &ufsphy1 { status = "okay"; }; &ufs1 { status = "okay"; }; &uartblsp2dm1 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart_console_active>; }; /* Rome SDIO */ &sdhc_1 { reg = <0x7464900 0x500>, <0x7464000 0x800>; reg-names = "hc_mem", "core_mem"; vdd-supply = <&wlan_en_vreg>; pinctrl-names = "active", "sleep"; pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; qcom,clk-rates = <400000 20000000 25000000 50000000 96000000 192000000>; qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104"; qcom,bus-width = <4>; qcom,core_3_0v_support; qcom,nonremovable; qcom,force-sdhc1-probe; status = "okay"; }; /* SDCARD slot */ &sdhc_2 { vdd-supply = <&pm8994_l21>; qcom,vdd-voltage-level = <2950000 2950000>; qcom,vdd-current-level = <200 800000>; vdd-io-supply = <&pm8994_l13>; qcom,vdd-io-voltage-level = <1800000 2950000>; qcom,vdd-io-current-level = <200 22000>; pinctrl-names = "active", "sleep"; pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on_sbc>; pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off_sbc>; qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 200000000>; qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104"; cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; status = "okay"; }; &usb2s { status = "okay"; }; &usb3 { extcon = <&usb_detect>; vbus_dwc3-supply = <&usb_otg_switch>; vdda33-supply = <&pm8994_l24>; vdda18-supply = <&pm8994_l12>; }; &usb_otg_switch { gpio = <&pm8994_gpios 11 0>; enable-active-high; status = "ok"; /delete-property/ vin-supply; }; &pcie1 { qcom,msi-gicm-addr = <0x09bd0040>; qcom,msi-gicm-base = <0x240>; }; &pcie2 { /* Enumerate MDM on wake interrupt */ qcom,boot-option = <0x0>; }; &mdm3 { pinctrl-names = "mdm_active", "mdm_suspend"; pinctrl-0 = <&ap2mdm_active &mdm2ap_active>; pinctrl-1 = <&ap2mdm_sleep &mdm2ap_sleep>; interrupt-map = <0 &tlmm 108 0x3 1 &tlmm 107 0x3 2 &tlmm 112 0x3>; qcom,mdm2ap-errfatal-gpio = <&tlmm 108 0x00>; qcom,ap2mdm-errfatal-gpio = <&tlmm 109 0x00>; qcom,mdm2ap-status-gpio = <&tlmm 106 0x00>; qcom,ap2mdm-status-gpio = <&tlmm 107 0x00>; qcom,ap2mdm-soft-reset-gpio = <&pm8994_mpps 2 GPIO_ACTIVE_LOW>; qcom,ap2mdm-vddmin-gpio = <&tlmm 111 0x00>; qcom,mdm2ap-vddmin-gpio = <&tlmm 112 0x00>; status = "okay"; }; &mhi { qcom,mhi-address-window = <0x0 0x80000000 0x1 0xffffffff>; qcom,pci-dev_id = <0x0302>; qcom,pci-domain = <2>; qcom,pci-bus = <1>; qcom,pci-slot = <0>; esoc-names = "mdm"; esoc-0 = <&mdm3>; qcom,msm-bus,name = "mhi"; qcom,msm-bus,num-cases = <2>; qcom,msm-bus,num-paths = <1>; qcom,msm-bus,vectors-KBps = <100 512 0 0>, <100 512 1200000000 650000000>; mhi-chan-cfg-0 = <0x0 0x80 0x2 0x92>; mhi-chan-cfg-1 = <0x1 0x80 0x2 0xa2>; mhi-chan-cfg-2 = <0x2 0x80 0x1 0x91>; mhi-chan-cfg-3 = <0x3 0x80 0x1 0xa1>; mhi-chan-cfg-4 = <0x4 0x80 0x2 0x92>; mhi-chan-cfg-5 = <0x5 0x80 0x2 0xa2>; mhi-chan-cfg-6 = <0x6 0xa 0x2 0x92>; mhi-chan-cfg-7 = <0x7 0xa 0x2 0xa2>; mhi-chan-cfg-10 = <0xa 0x80 0x1 0x92>; mhi-chan-cfg-11 = <0xb 0x80 0x1 0xa2>; mhi-chan-cfg-14 = <0xe 0x40 0x1 0x92>; mhi-chan-cfg-15 = <0xf 0x40 0x1 0xa2>; mhi-chan-cfg-16 = <0x10 0x40 0x1 0x92>; mhi-chan-cfg-17 = <0x11 0x40 0x1 0xa2>; mhi-chan-cfg-18 = <0x12 0x40 0x1 0x92>; mhi-chan-cfg-19 = <0x13 0x40 0x1 0xa2>; mhi-chan-cfg-20 = <0x14 0xa 0x2 0x92>; mhi-chan-cfg-21 = <0x15 0xa 0x2 0xa2>; mhi-chan-cfg-22 = <0x16 0x40 0x2 0x92>; mhi-chan-cfg-23 = <0x17 0x40 0x2 0xa2>; mhi-chan-cfg-24 = <0x18 0xa 0x1 0x91>; mhi-chan-cfg-25 = <0x19 0xa 0x1 0xa1>; mhi-chan-cfg-32 = <0x20 0x80 0x2 0x92>; mhi-chan-cfg-33 = <0x21 0x80 0x2 0xa2>; mhi-chan-cfg-34 = <0x22 0x80 0x2 0x92>; mhi-chan-cfg-35 = <0x23 0x80 0x2 0xa2>; mhi-chan-cfg-46 = <0x2e 0x80 0x2 0x412>; mhi-chan-cfg-47 = <0x2f 0x80 0x3 0x422>; mhi-chan-cfg-100 = <0x64 0x80 0x4 0x652>; mhi-chan-cfg-101 = <0x65 0x80 0x5 0x762>; mhi-event-rings = <6>; mhi-event-cfg-0 = <0x80 0x0 0x1 0 1 0x11>; mhi-event-cfg-1 = <0x80 0x1 0x1 0 1 0x11>; mhi-event-cfg-2 = <0x80 0x2 0x5 0 2 0x11>; mhi-event-cfg-3 = <0x100 0x3 0x1 47 1 0x48>; mhi-event-cfg-4 = <0x100 0x4 0x1 100 1 0x69>; mhi-event-cfg-5 = <0x100 0x5 0x1 101 1 0x68>; status = "okay"; }; &tlmm { /* Set these up as hogs */ pinctrl-names = "default"; pinctrl-0 = <&can_reset_gpio>; }; &pm8994_gpios { gpio@c700 { /* GPIO 8 - WLAN_EN */ qcom,mode = <1>; /* Digital output*/ qcom,pull = <4>; /* Pulldown 10uA */ qcom,vin-sel = <2>; /* VIN2 */ qcom,src-sel = <0>; /* GPIO */ qcom,invert = <0>; /* Invert */ qcom,master-en = <1>; /* Enable GPIO */ status = "okay"; }; gpio@c800 { /* GPIO 9 - Rome 3.3V control */ qcom,mode = <1>; /* Digital output */ qcom,output-type = <0>; /* MOS logic */ qcom,invert = <1>; /* Output high */ qcom,vin-sel = <0>; /* VPH_PWR */ qcom,src-sel = <0>; /* Constant */ qcom,out-strength = <1>; /* High drive strength */ qcom,master-en = <1>; /* Enable GPIO */ status = "okay"; }; gpio@ca00 { /* GPIO 11 - USB ENB1 (otg switch) */ qcom,mode = <1>; /* DIGITAL OUT */ qcom,vin-sel = <2>; /* 1.8 */ qcom,src-sel = <0>; /* GPIO */ qcom,master-en = <1>; /* Enable GPIO */ status = "okay"; }; gpio@d000 { /* GPIO 17 - USB1 VBUS detect */ qcom,mode = <0>; /* Digital Input*/ qcom,pull = <5>; /* No pull */ qcom,vin-sel = <2>; /* 1.8 V */ qcom,src-sel = <0>; /* GPIO */ qcom,master-en = <1>; /* Enable GPIO */ status = "okay"; }; gpio@d100 { /* GPIO 18 - Rome Sleep Clock */ qcom,mode = <1>; /* Digital output */ qcom,output-type = <0>; /* CMOS logic */ qcom,invert = <0>; /* Output low initially */ qcom,vin-sel = <2>; /* VIN 2 */ qcom,src-sel = <3>; /* Function 2 */ qcom,out-strength = <2>; /* Medium */ qcom,master-en = <1>; /* Enable GPIO */ status = "okay"; }; }; &pm8994_mpps { mpp@a100 { /* MPP 2 */ /* MDM PON conrol*/ qcom,mode = <1>; /* Digital output */ qcom,output-type = <0>; /* CMOS logic */ qcom,vin-sel = <2>; /* S4 1.8V */ qcom,src-sel = <0>; /* Constant */ qcom,master-en = <1>; /* Enable GPIO */ qcom,invert = <1>; /* Output high */ status = "okay"; }; }; &pm8994_vadc { chan@5 { label = "vcoin"; reg = <5>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <1>; qcom,calibration-type = "absolute"; qcom,scale-function = <0>; qcom,hw-settle-time = <0>; qcom,fast-avg-setup = <0>; }; chan@7 { label = "vph_pwr"; reg = <7>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <1>; qcom,calibration-type = "absolute"; qcom,scale-function = <0>; qcom,hw-settle-time = <0>; qcom,fast-avg-setup = <0>; }; chan@73 { label = "msm_therm"; reg = <0x73>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <0>; qcom,calibration-type = "ratiometric"; qcom,scale-function = <2>; qcom,hw-settle-time = <2>; qcom,fast-avg-setup = <0>; }; chan@74 { label = "emmc_therm"; reg = <0x74>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <0>; qcom,calibration-type = "ratiometric"; qcom,scale-function = <2>; qcom,hw-settle-time = <2>; qcom,fast-avg-setup = <0>; }; chan@75 { label = "pa_therm0"; reg = <0x75>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <0>; qcom,calibration-type = "ratiometric"; qcom,scale-function = <2>; qcom,hw-settle-time = <2>; qcom,fast-avg-setup = <0>; }; chan@77 { label = "pa_therm1"; reg = <0x77>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <0>; qcom,calibration-type = "ratiometric"; qcom,scale-function = <2>; qcom,hw-settle-time = <2>; qcom,fast-avg-setup = <0>; }; chan@78 { label = "quiet_therm"; reg = <0x78>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <0>; qcom,calibration-type = "ratiometric"; qcom,scale-function = <2>; qcom,hw-settle-time = <2>; qcom,fast-avg-setup = <0>; }; chan@7c { label = "xo_therm_buf"; reg = <0x7c>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <0>; qcom,calibration-type = "ratiometric"; qcom,scale-function = <4>; qcom,hw-settle-time = <2>; qcom,fast-avg-setup = <0>; }; }; &pm8994_adc_tm { chan@73 { label = "msm_therm"; reg = <0x73>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <0>; qcom,calibration-type = "ratiometric"; qcom,scale-function = <2>; qcom,hw-settle-time = <2>; qcom,fast-avg-setup = <0>; qcom,btm-channel-number = <0x48>; qcom,thermal-node; }; chan@74 { label = "emmc_therm"; reg = <0x74>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <0>; qcom,calibration-type = "ratiometric"; qcom,scale-function = <2>; qcom,hw-settle-time = <2>; qcom,fast-avg-setup = <0>; qcom,btm-channel-number = <0x68>; qcom,thermal-node; }; chan@75 { label = "pa_therm0"; reg = <0x75>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <0>; qcom,calibration-type = "ratiometric"; qcom,scale-function = <2>; qcom,hw-settle-time = <2>; qcom,fast-avg-setup = <0>; qcom,btm-channel-number = <0x70>; qcom,thermal-node; }; chan@77 { label = "pa_therm1"; reg = <0x77>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <0>; qcom,calibration-type = "ratiometric"; qcom,scale-function = <2>; qcom,hw-settle-time = <2>; qcom,fast-avg-setup = <0>; qcom,btm-channel-number = <0x78>; qcom,thermal-node; }; chan@78 { label = "quiet_therm"; reg = <0x78>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <0>; qcom,calibration-type = "ratiometric"; qcom,scale-function = <2>; qcom,hw-settle-time = <2>; qcom,fast-avg-setup = <0>; qcom,btm-channel-number = <0x80>; qcom,thermal-node; }; chan@7c { label = "xo_therm_buf"; reg = <0x7c>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <0>; qcom,calibration-type = "ratiometric"; qcom,scale-function = <4>; qcom,hw-settle-time = <2>; qcom,fast-avg-setup = <0>; qcom,btm-channel-number = <0x88>; qcom,thermal-node; }; }; arch/arm/boot/dts/qcom/msm8996-pinctrl.dtsi +28 −1 Original line number Diff line number Diff line /* Copyright (c) 2014-2016, The Linux Foundation. All rights reserved. /* Copyright (c) 2014-2017, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and Loading Loading @@ -2731,5 +2731,32 @@ }; }; }; pmx_pps: pmx_pps { mux { pins = "gpio22"; function = "gpio"; }; config { pins = "gpio22"; drive-strength = <16>; /* 16 mA */ bias-pull-down; /* pull down */ }; }; can_reset_gpio: can_reset_gpio { mux { pins = "gpio71"; function = "gpio"; }; config { pins = "gpio71"; drive-strength = <2>; output-high; bias-pull-up; }; }; }; }; arch/arm/boot/dts/qcom/msm8996pro-auto-cv2x.dts 0 → 100644 +26 −0 Original line number Diff line number Diff line /* Copyright (c) 2017, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include <dt-bindings/gpio/gpio.h> #include "msm8996pro.dtsi" #include "msm8996-pm8994.dtsi" #include "msm8996pro-auto.dtsi" #include "msm8996-cv2x.dtsi" / { model = "Qualcomm Technologies, Inc. MSM 8996pro AUTO CV2X"; compatible = "qcom,msm8996-adp", "qcom,msm8996", "qcom,adp"; qcom,msm-id = <315 0x10001>; qcom,board-id = <0x1e 0>; }; Loading
arch/arm/boot/dts/qcom/Makefile +1 −0 Original line number Diff line number Diff line Loading @@ -32,6 +32,7 @@ dtb-$(CONFIG_ARCH_MSM8996) += msm8996-v2-pmi8994-cdp.dtb \ msm8996pro-auto-adp.dtb \ msm8996pro-auto-adp-lite.dtb \ msm8996pro-auto-cdp.dtb \ msm8996pro-auto-cv2x.dtb \ msm8996pro-pmi8994-cdp.dtb \ msm8996pro-pmi8994-mtp.dtb \ msm8996pro-pmi8994-pmk8001-cdp.dtb \ Loading
arch/arm/boot/dts/qcom/msm8996-cv2x.dtsi 0 → 100644 +641 −0 Original line number Diff line number Diff line /* Copyright (c) 2017, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include "msm8996-pinctrl.dtsi" #include "external-soc.dtsi" / { reserved-memory { lk_mem: lk_pool@91600000 { reg = <0x0 0x91600000 0x0 0x600000>; label = "lk_pool"; }; }; aliases { mhi_rmnet0 = &mhi_rmnet_0; mhi_rmnet1 = &mhi_rmnet_1; mhi_uci0 = &mhi_uci; mhi0 = &mhi; }; gpio-leds { compatible = "gpio-leds"; status { gpios = <&tlmm 21 0>; default-state = "on"; }; }; pps { compatible = "pps-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pmx_pps>; gpios = <&tlmm 22 0>; status = "okay"; }; }; &soc { /delete-node/ sound-9335; qcom,ntn_avb { compatible = "qcom,ntn_avb"; vdd-ntn-pci-supply = <&ntn_vreg>; vdd-ntn-io-supply = <&ntn_vreg>; qcom,ntn-rst-delay-msec = <100>; qcom,ntn-rc-num = <1>; qcom,ntn-bus-num = <1>; qcom,ntn-mdio-bus-id = <1>; qcom,ntn-phy-addr = <7>; qcom,msm-bus,name = "ntn"; qcom,msm-bus,num-cases = <2>; qcom,msm-bus,num-paths = <1>; qcom,msm-bus,vectors-KBps = <100 512 0 0>, <100 512 207108 14432000>; }; usb_detect: usb_detect { compatible = "qcom,gpio-usbdetect"; qcom,vbus-det-gpio = <&pm8994_gpios 17 0>; interrupt-parent = <&spmi_bus>; interrupts = <0x0 0x9 0x0 IRQ_TYPE_NONE>; interrupt-names ="pmic_id_irq"; }; qcom,cnss { vdd-wlan-en-supply = <&wlan_en_vreg>; qcom,wlan-en-vreg-support; /delete-property/ wlan-en-gpio; /delete-property/ wlan-bootstrap-gpio; /delete-property/ vdd-wlan-core-supply; }; qcom,cnss_sdio { compatible = "qcom,cnss_sdio"; subsys-name = "AR6320_SDIO"; vdd-wlan-supply = <&rome_vreg>; vdd-wlan-xtal-supply = <&pm8994_l30>; vdd-wlan-io-supply = <&pm8994_s4>; vdd-wlan-dsrc-supply = <&dsrc_vreg>; qcom,wlan-ramdump-dynamic = <0x200000>; qcom,skip-wlan-en-toggle; }; ntn_vreg: regulator-ntn-tps65051 { compatible = "regulator-fixed"; regulator-name = "ntn_vreg"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; startup-delay-us = <920>; gpio = <&tlmm 138 0>; enable-active-high; }; eth_phy_vreg: regulator-eth-phy-tps65051 { compatible = "regulator-fixed"; regulator-name = "eth_phy_vreg"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; startup-delay-us = <920>; gpio = <&tlmm 136 0>; enable-active-high; regulator-always-on; }; hsm_vreg: regulator-hsm-tps22966 { compatible = "regulator-fixed"; regulator-name = "hsm_vreg"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; startup-delay-us = <2410>; gpio = <&tlmm 81 0>; enable-active-high; regulator-always-on; }; dsrc_vreg: dsrc_vreg { compatible = "regulator-fixed"; regulator-name = "dsrc_vreg"; startup-delay-us = <2410>; enable-active-high; gpio = <&tlmm 125 0>; }; mhi_rmnet_0: qcom,mhi-rmnet@0 { compatible = "qcom,mhi-rmnet"; cell-index = <0>; qcom,mhi = <&mhi>; qcom,mhi-rx-channel = <101>; qcom,mhi-tx-channel = <100>; qcom,mhi-mru = <0x4000>; status = "okay"; }; mhi_rmnet_1: qcom,mhi-rmnet@1 { compatible = "qcom,mhi-rmnet"; cell-index = <1>; qcom,mhi = <&mhi>; qcom,mhi-rx-channel = <47>; qcom,mhi-tx-channel = <46>; qcom,mhi-mru = <0x4000>; qcom,interface-name = "mhi_swip"; status = "okay"; }; mhi_uci: qcom,mhi-uci { compatible = "qcom,mhi-uci"; qcom,mhi-uci-channels = <0 0xffff>, <1 0x1000>, <2 0xffff>, <3 0xffff>, <10 0xffff>, <11 0x1000>, <14 0xffff>, <15 0x1000>, <16 0xffff>, <17 0x1000>, <18 0xffff>, <19 0x1000>, <22 0xffff>, <23 0x1000>, <24 0xffff>, <25 0x1000>, <32 0xffff>, <33 0x1000>; qcom,mhi-uci-ctrlchan = <18>; qcom,mhi = <&mhi>; status = "okay"; }; }; /delete-node/ &sde_kms; /delete-node/ &sde_dsi0; /delete-node/ &sde_dsi1; /delete-node/ &sde_dsi_phy0; /delete-node/ &sde_dsi_phy1; /delete-node/ &sde_hdmi_tx; /delete-node/ &mdss_mdp; /delete-node/ &mdss_dsi; /delete-node/ &msm_ext_disp; /delete-node/ &mdss_hdmi_tx; /delete-node/ &mdss_rotator; /delete-node/ &routing; &pil_modem { status = "disabled"; }; &pm8994_l9 { regulator-always-on; }; &pm8994_l10 { regulator-always-on; }; &wlan_en_vreg { status = "okay"; }; &i2c_12 { status = "disabled"; }; &spi_9 { status = "okay"; /* CAN controller */ spi@0 { compatible = "nxp,mpc57xx"; reg = <0>; spi-max-frequency = <19200000>; }; }; &spi_12 { status = "okay"; /* HSM module */ spi@0 { compatible = "infineon,sli97"; reg = <0>; spi-max-frequency = <4800000>; }; }; &ufs_ice { status = "okay"; }; &ufsphy1 { status = "okay"; }; &ufs1 { status = "okay"; }; &uartblsp2dm1 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart_console_active>; }; /* Rome SDIO */ &sdhc_1 { reg = <0x7464900 0x500>, <0x7464000 0x800>; reg-names = "hc_mem", "core_mem"; vdd-supply = <&wlan_en_vreg>; pinctrl-names = "active", "sleep"; pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; qcom,clk-rates = <400000 20000000 25000000 50000000 96000000 192000000>; qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104"; qcom,bus-width = <4>; qcom,core_3_0v_support; qcom,nonremovable; qcom,force-sdhc1-probe; status = "okay"; }; /* SDCARD slot */ &sdhc_2 { vdd-supply = <&pm8994_l21>; qcom,vdd-voltage-level = <2950000 2950000>; qcom,vdd-current-level = <200 800000>; vdd-io-supply = <&pm8994_l13>; qcom,vdd-io-voltage-level = <1800000 2950000>; qcom,vdd-io-current-level = <200 22000>; pinctrl-names = "active", "sleep"; pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on_sbc>; pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off_sbc>; qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 200000000>; qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104"; cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; status = "okay"; }; &usb2s { status = "okay"; }; &usb3 { extcon = <&usb_detect>; vbus_dwc3-supply = <&usb_otg_switch>; vdda33-supply = <&pm8994_l24>; vdda18-supply = <&pm8994_l12>; }; &usb_otg_switch { gpio = <&pm8994_gpios 11 0>; enable-active-high; status = "ok"; /delete-property/ vin-supply; }; &pcie1 { qcom,msi-gicm-addr = <0x09bd0040>; qcom,msi-gicm-base = <0x240>; }; &pcie2 { /* Enumerate MDM on wake interrupt */ qcom,boot-option = <0x0>; }; &mdm3 { pinctrl-names = "mdm_active", "mdm_suspend"; pinctrl-0 = <&ap2mdm_active &mdm2ap_active>; pinctrl-1 = <&ap2mdm_sleep &mdm2ap_sleep>; interrupt-map = <0 &tlmm 108 0x3 1 &tlmm 107 0x3 2 &tlmm 112 0x3>; qcom,mdm2ap-errfatal-gpio = <&tlmm 108 0x00>; qcom,ap2mdm-errfatal-gpio = <&tlmm 109 0x00>; qcom,mdm2ap-status-gpio = <&tlmm 106 0x00>; qcom,ap2mdm-status-gpio = <&tlmm 107 0x00>; qcom,ap2mdm-soft-reset-gpio = <&pm8994_mpps 2 GPIO_ACTIVE_LOW>; qcom,ap2mdm-vddmin-gpio = <&tlmm 111 0x00>; qcom,mdm2ap-vddmin-gpio = <&tlmm 112 0x00>; status = "okay"; }; &mhi { qcom,mhi-address-window = <0x0 0x80000000 0x1 0xffffffff>; qcom,pci-dev_id = <0x0302>; qcom,pci-domain = <2>; qcom,pci-bus = <1>; qcom,pci-slot = <0>; esoc-names = "mdm"; esoc-0 = <&mdm3>; qcom,msm-bus,name = "mhi"; qcom,msm-bus,num-cases = <2>; qcom,msm-bus,num-paths = <1>; qcom,msm-bus,vectors-KBps = <100 512 0 0>, <100 512 1200000000 650000000>; mhi-chan-cfg-0 = <0x0 0x80 0x2 0x92>; mhi-chan-cfg-1 = <0x1 0x80 0x2 0xa2>; mhi-chan-cfg-2 = <0x2 0x80 0x1 0x91>; mhi-chan-cfg-3 = <0x3 0x80 0x1 0xa1>; mhi-chan-cfg-4 = <0x4 0x80 0x2 0x92>; mhi-chan-cfg-5 = <0x5 0x80 0x2 0xa2>; mhi-chan-cfg-6 = <0x6 0xa 0x2 0x92>; mhi-chan-cfg-7 = <0x7 0xa 0x2 0xa2>; mhi-chan-cfg-10 = <0xa 0x80 0x1 0x92>; mhi-chan-cfg-11 = <0xb 0x80 0x1 0xa2>; mhi-chan-cfg-14 = <0xe 0x40 0x1 0x92>; mhi-chan-cfg-15 = <0xf 0x40 0x1 0xa2>; mhi-chan-cfg-16 = <0x10 0x40 0x1 0x92>; mhi-chan-cfg-17 = <0x11 0x40 0x1 0xa2>; mhi-chan-cfg-18 = <0x12 0x40 0x1 0x92>; mhi-chan-cfg-19 = <0x13 0x40 0x1 0xa2>; mhi-chan-cfg-20 = <0x14 0xa 0x2 0x92>; mhi-chan-cfg-21 = <0x15 0xa 0x2 0xa2>; mhi-chan-cfg-22 = <0x16 0x40 0x2 0x92>; mhi-chan-cfg-23 = <0x17 0x40 0x2 0xa2>; mhi-chan-cfg-24 = <0x18 0xa 0x1 0x91>; mhi-chan-cfg-25 = <0x19 0xa 0x1 0xa1>; mhi-chan-cfg-32 = <0x20 0x80 0x2 0x92>; mhi-chan-cfg-33 = <0x21 0x80 0x2 0xa2>; mhi-chan-cfg-34 = <0x22 0x80 0x2 0x92>; mhi-chan-cfg-35 = <0x23 0x80 0x2 0xa2>; mhi-chan-cfg-46 = <0x2e 0x80 0x2 0x412>; mhi-chan-cfg-47 = <0x2f 0x80 0x3 0x422>; mhi-chan-cfg-100 = <0x64 0x80 0x4 0x652>; mhi-chan-cfg-101 = <0x65 0x80 0x5 0x762>; mhi-event-rings = <6>; mhi-event-cfg-0 = <0x80 0x0 0x1 0 1 0x11>; mhi-event-cfg-1 = <0x80 0x1 0x1 0 1 0x11>; mhi-event-cfg-2 = <0x80 0x2 0x5 0 2 0x11>; mhi-event-cfg-3 = <0x100 0x3 0x1 47 1 0x48>; mhi-event-cfg-4 = <0x100 0x4 0x1 100 1 0x69>; mhi-event-cfg-5 = <0x100 0x5 0x1 101 1 0x68>; status = "okay"; }; &tlmm { /* Set these up as hogs */ pinctrl-names = "default"; pinctrl-0 = <&can_reset_gpio>; }; &pm8994_gpios { gpio@c700 { /* GPIO 8 - WLAN_EN */ qcom,mode = <1>; /* Digital output*/ qcom,pull = <4>; /* Pulldown 10uA */ qcom,vin-sel = <2>; /* VIN2 */ qcom,src-sel = <0>; /* GPIO */ qcom,invert = <0>; /* Invert */ qcom,master-en = <1>; /* Enable GPIO */ status = "okay"; }; gpio@c800 { /* GPIO 9 - Rome 3.3V control */ qcom,mode = <1>; /* Digital output */ qcom,output-type = <0>; /* MOS logic */ qcom,invert = <1>; /* Output high */ qcom,vin-sel = <0>; /* VPH_PWR */ qcom,src-sel = <0>; /* Constant */ qcom,out-strength = <1>; /* High drive strength */ qcom,master-en = <1>; /* Enable GPIO */ status = "okay"; }; gpio@ca00 { /* GPIO 11 - USB ENB1 (otg switch) */ qcom,mode = <1>; /* DIGITAL OUT */ qcom,vin-sel = <2>; /* 1.8 */ qcom,src-sel = <0>; /* GPIO */ qcom,master-en = <1>; /* Enable GPIO */ status = "okay"; }; gpio@d000 { /* GPIO 17 - USB1 VBUS detect */ qcom,mode = <0>; /* Digital Input*/ qcom,pull = <5>; /* No pull */ qcom,vin-sel = <2>; /* 1.8 V */ qcom,src-sel = <0>; /* GPIO */ qcom,master-en = <1>; /* Enable GPIO */ status = "okay"; }; gpio@d100 { /* GPIO 18 - Rome Sleep Clock */ qcom,mode = <1>; /* Digital output */ qcom,output-type = <0>; /* CMOS logic */ qcom,invert = <0>; /* Output low initially */ qcom,vin-sel = <2>; /* VIN 2 */ qcom,src-sel = <3>; /* Function 2 */ qcom,out-strength = <2>; /* Medium */ qcom,master-en = <1>; /* Enable GPIO */ status = "okay"; }; }; &pm8994_mpps { mpp@a100 { /* MPP 2 */ /* MDM PON conrol*/ qcom,mode = <1>; /* Digital output */ qcom,output-type = <0>; /* CMOS logic */ qcom,vin-sel = <2>; /* S4 1.8V */ qcom,src-sel = <0>; /* Constant */ qcom,master-en = <1>; /* Enable GPIO */ qcom,invert = <1>; /* Output high */ status = "okay"; }; }; &pm8994_vadc { chan@5 { label = "vcoin"; reg = <5>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <1>; qcom,calibration-type = "absolute"; qcom,scale-function = <0>; qcom,hw-settle-time = <0>; qcom,fast-avg-setup = <0>; }; chan@7 { label = "vph_pwr"; reg = <7>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <1>; qcom,calibration-type = "absolute"; qcom,scale-function = <0>; qcom,hw-settle-time = <0>; qcom,fast-avg-setup = <0>; }; chan@73 { label = "msm_therm"; reg = <0x73>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <0>; qcom,calibration-type = "ratiometric"; qcom,scale-function = <2>; qcom,hw-settle-time = <2>; qcom,fast-avg-setup = <0>; }; chan@74 { label = "emmc_therm"; reg = <0x74>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <0>; qcom,calibration-type = "ratiometric"; qcom,scale-function = <2>; qcom,hw-settle-time = <2>; qcom,fast-avg-setup = <0>; }; chan@75 { label = "pa_therm0"; reg = <0x75>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <0>; qcom,calibration-type = "ratiometric"; qcom,scale-function = <2>; qcom,hw-settle-time = <2>; qcom,fast-avg-setup = <0>; }; chan@77 { label = "pa_therm1"; reg = <0x77>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <0>; qcom,calibration-type = "ratiometric"; qcom,scale-function = <2>; qcom,hw-settle-time = <2>; qcom,fast-avg-setup = <0>; }; chan@78 { label = "quiet_therm"; reg = <0x78>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <0>; qcom,calibration-type = "ratiometric"; qcom,scale-function = <2>; qcom,hw-settle-time = <2>; qcom,fast-avg-setup = <0>; }; chan@7c { label = "xo_therm_buf"; reg = <0x7c>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <0>; qcom,calibration-type = "ratiometric"; qcom,scale-function = <4>; qcom,hw-settle-time = <2>; qcom,fast-avg-setup = <0>; }; }; &pm8994_adc_tm { chan@73 { label = "msm_therm"; reg = <0x73>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <0>; qcom,calibration-type = "ratiometric"; qcom,scale-function = <2>; qcom,hw-settle-time = <2>; qcom,fast-avg-setup = <0>; qcom,btm-channel-number = <0x48>; qcom,thermal-node; }; chan@74 { label = "emmc_therm"; reg = <0x74>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <0>; qcom,calibration-type = "ratiometric"; qcom,scale-function = <2>; qcom,hw-settle-time = <2>; qcom,fast-avg-setup = <0>; qcom,btm-channel-number = <0x68>; qcom,thermal-node; }; chan@75 { label = "pa_therm0"; reg = <0x75>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <0>; qcom,calibration-type = "ratiometric"; qcom,scale-function = <2>; qcom,hw-settle-time = <2>; qcom,fast-avg-setup = <0>; qcom,btm-channel-number = <0x70>; qcom,thermal-node; }; chan@77 { label = "pa_therm1"; reg = <0x77>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <0>; qcom,calibration-type = "ratiometric"; qcom,scale-function = <2>; qcom,hw-settle-time = <2>; qcom,fast-avg-setup = <0>; qcom,btm-channel-number = <0x78>; qcom,thermal-node; }; chan@78 { label = "quiet_therm"; reg = <0x78>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <0>; qcom,calibration-type = "ratiometric"; qcom,scale-function = <2>; qcom,hw-settle-time = <2>; qcom,fast-avg-setup = <0>; qcom,btm-channel-number = <0x80>; qcom,thermal-node; }; chan@7c { label = "xo_therm_buf"; reg = <0x7c>; qcom,decimation = <0>; qcom,pre-div-channel-scaling = <0>; qcom,calibration-type = "ratiometric"; qcom,scale-function = <4>; qcom,hw-settle-time = <2>; qcom,fast-avg-setup = <0>; qcom,btm-channel-number = <0x88>; qcom,thermal-node; }; };
arch/arm/boot/dts/qcom/msm8996-pinctrl.dtsi +28 −1 Original line number Diff line number Diff line /* Copyright (c) 2014-2016, The Linux Foundation. All rights reserved. /* Copyright (c) 2014-2017, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and Loading Loading @@ -2731,5 +2731,32 @@ }; }; }; pmx_pps: pmx_pps { mux { pins = "gpio22"; function = "gpio"; }; config { pins = "gpio22"; drive-strength = <16>; /* 16 mA */ bias-pull-down; /* pull down */ }; }; can_reset_gpio: can_reset_gpio { mux { pins = "gpio71"; function = "gpio"; }; config { pins = "gpio71"; drive-strength = <2>; output-high; bias-pull-up; }; }; }; };
arch/arm/boot/dts/qcom/msm8996pro-auto-cv2x.dts 0 → 100644 +26 −0 Original line number Diff line number Diff line /* Copyright (c) 2017, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include <dt-bindings/gpio/gpio.h> #include "msm8996pro.dtsi" #include "msm8996-pm8994.dtsi" #include "msm8996pro-auto.dtsi" #include "msm8996-cv2x.dtsi" / { model = "Qualcomm Technologies, Inc. MSM 8996pro AUTO CV2X"; compatible = "qcom,msm8996-adp", "qcom,msm8996", "qcom,adp"; qcom,msm-id = <315 0x10001>; qcom,board-id = <0x1e 0>; };
