Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 8a85954a authored by Xiaogang Cui's avatar Xiaogang Cui Committed by Gerrit - the friendly Code Review server
Browse files

ARM: dts: msm: add support for apq8998 QRD SKUK HDK board 



Add initial device trees for aqp8998 QRD SKUK HDK board.

Change-Id: I6b457de0a5e7680ee052f206aeb88d45639ab3bb
Signed-off-by: default avatarXiaogang Cui <xiaogang@codeaurora.org>
parent c78ba94d

arch/arm/boot/dts/qcom/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -123,6 +123,7 @@ dtb-$(CONFIG_ARCH_MSM8998) += msm8998-sim.dtb \ 
	apq8998-v2-mtp.dtb \

	apq8998-v2-cdp.dtb \

	apq8998-v2-qrd.dtb \

	apq8998-v2-qrd-skuk-hdk.dtb \

	msm8998-v2.1-mtp.dtb \

	msm8998-v2.1-cdp.dtb \

	msm8998-v2.1-qrd.dtb \

arch/arm/boot/dts/qcom/apq8998-v2-qrd-skuk-hdk.dts

0 → 100644
+23 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2017, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */





/dts-v1/;



#include "apq8998-v2.dtsi"

#include "msm8998-qrd-skuk-hdk.dtsi"



/ {

	model = "Qualcomm Technologies, Inc. APQ 8998 SKUK HDK";

	compatible = "qcom,msm8998-qrd", "qcom,msm8998", "qcom,qrd";

	qcom,board-id = <0x06000b 0x10>;

};

arch/arm/boot/dts/qcom/msm8998-qrd-skuk-hdk.dtsi

0 → 100644
+138 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2017, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



#include "msm8998-qrd-skuk.dtsi"

#include "msm8998-camera-sensor-skuk-hdk.dtsi"



&soc {

	sound-tavil {

		qcom,msm-mbhc-hphl-swh = <0>;

	};

};



&pmx_mdss {

	mdss_dsi_active: mdss_dsi_active {

		mux {

			pins = "gpio52", "gpio94";

			function = "gpio";

		};



		config {

			pins = "gpio52", "gpio94";

			drive-strength = <8>; /* 8 mA */

			bias-disable = <0>; /* no pull */

		};

	};



	mdss_dsi_suspend: mdss_dsi_suspend {

		mux {

			pins = "gpio52", "gpio94";

			function = "gpio";

		};



		config {

			pins = "gpio52", "gpio94";

			drive-strength = <2>; /* 2 mA */

			bias-pull-down; /* pull down */

		};

	};

};



&mdss_mdp {

	qcom,mdss-pref-prim-intf = "dsi";

};



&mdss_dsi {

	hw-config = "split_dsi";

};



&mdss_dsi0 {

	qcom,dsi-pref-prim-pan = <&dsi_dual_s6e3ha3_amoled_cmd>;

	pinctrl-names = "mdss_default", "mdss_sleep";

	pinctrl-0 = <&mdss_dsi_active &mdss_te_active>;

	pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>;

	qcom,platform-te-gpio = <&tlmm 10 0>;

	qcom,platform-enable-gpio = <&tlmm 52 0>;

	qcom,platform-reset-gpio = <&tlmm 94 0>;

	qcom,platform-bklight-en-gpio = <&pmi8998_gpios 1 0>;

	qcom,platform-bklight-en-gpio-invert;

};



&mdss_dsi1 {

	qcom,dsi-pref-prim-pan = <&dsi_dual_s6e3ha3_amoled_cmd>;

	pinctrl-names = "mdss_default", "mdss_sleep";

	pinctrl-0 = <&mdss_dsi_active &mdss_te_active>;

	pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>;

	qcom,platform-te-gpio = <&tlmm 10 0>;

	qcom,platform-enable-gpio = <&tlmm 52 0>;

	qcom,platform-reset-gpio = <&tlmm 94 0>;

	qcom,platform-bklight-en-gpio = <&pmi8998_gpios 1 0>;

	qcom,platform-bklight-en-gpio-invert;

};



&pmi8998_wled {

	qcom,disp-type-amoled;

};



&labibb {

	status = "ok";

	qcom,qpnp-labibb-mode = "amoled";

	qcom,swire-control;

};



&pmi8998_gpios {

	/* GPIO 1 for WLED power enable */

	gpio@c000 {

		qcom,mode = <1>;

		qcom,output-type = <0>;

		qcom,pull = <5>;

		qcom,vin-sel = <0>;

		qcom,out-strength = <1>;

		qcom,src-sel = <0>;

		qcom,invert = <0>;

		qcom,master-en = <1>;

		status = "okay";

	};

};



&dsi_dual_s6e3ha3_amoled_cmd {

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

	qcom,mdss-dsi-bl-min-level = <1>;

	qcom,mdss-dsi-bl-max-level = <255>;

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;

};



&i2c_5 {

	status = "okay";

	st_fts@49 {

		compatible = "st,fts";

		reg = <0x49>;

		interrupt-parent = <&tlmm>;

		interrupts = <125 0x2008>;

		vdd-supply = <&pm8998_l6>;

		avdd-supply = <&pm8998_l28>;

		pinctrl-names = "pmx_ts_active", "pmx_ts_suspend";

		pinctrl-0 = <&ts_active>;

		pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;

		st,irq-gpio = <&tlmm 125 0x2008>;

		st,reset-gpio = <&tlmm 89 0x00>;

		st,regulator_dvdd = "vdd";

		st,regulator_avdd = "avdd";

	};

};



&soc {

	/* HDK835 do not use improveTouch. If do not remove this node,

	 * legacy TOUCH could not work.

	 */

	/delete-node/hbtp;

};

arch/arm/boot/dts/qcom/msm8998-v2-qrd-skuk-hdk.dts

+1 −127
Original line number Diff line number Diff line
@@ -10,139 +10,13 @@ 
 * GNU General Public License for more details.

 */





/dts-v1/;



#include "msm8998-v2.dtsi"

#include "msm8998-qrd-skuk.dtsi"

#include "msm8998-camera-sensor-skuk-hdk.dtsi"

#include "msm8998-qrd-skuk-hdk.dtsi"



/ {

	model = "Qualcomm Technologies, Inc. MSM 8998 SKUK HDK";

	compatible = "qcom,msm8998-qrd", "qcom,msm8998", "qcom,qrd";

	qcom,board-id = <0x06000b 0x10>;

};
 


&soc {

	sound-tavil {

		qcom,msm-mbhc-hphl-swh = <0>;

	};

};



&pmx_mdss {

	mdss_dsi_active: mdss_dsi_active {

		mux {

			pins = "gpio52", "gpio94";

			function = "gpio";

		};



		config {

			pins = "gpio52", "gpio94";

			drive-strength = <8>; /* 8 mA */

			bias-disable = <0>; /* no pull */

		};

	};



	mdss_dsi_suspend: mdss_dsi_suspend {

		mux {

			pins = "gpio52", "gpio94";

			function = "gpio";

		};



		config {

			pins = "gpio52", "gpio94";

			drive-strength = <2>; /* 2 mA */

			bias-pull-down; /* pull down */

		};

	};

};



&mdss_mdp {

	qcom,mdss-pref-prim-intf = "dsi";

};



&mdss_dsi {

	hw-config = "split_dsi";

};



&mdss_dsi0 {

	qcom,dsi-pref-prim-pan = <&dsi_dual_s6e3ha3_amoled_cmd>;

	pinctrl-names = "mdss_default", "mdss_sleep";

	pinctrl-0 = <&mdss_dsi_active &mdss_te_active>;

	pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>;

	qcom,platform-te-gpio = <&tlmm 10 0>;

	qcom,platform-enable-gpio = <&tlmm 52 0>;

	qcom,platform-reset-gpio = <&tlmm 94 0>;

	qcom,platform-bklight-en-gpio = <&pmi8998_gpios 1 0>;

	qcom,platform-bklight-en-gpio-invert;

};



&mdss_dsi1 {

	qcom,dsi-pref-prim-pan = <&dsi_dual_s6e3ha3_amoled_cmd>;

	pinctrl-names = "mdss_default", "mdss_sleep";

	pinctrl-0 = <&mdss_dsi_active &mdss_te_active>;

	pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>;

	qcom,platform-te-gpio = <&tlmm 10 0>;

	qcom,platform-enable-gpio = <&tlmm 52 0>;

	qcom,platform-reset-gpio = <&tlmm 94 0>;

	qcom,platform-bklight-en-gpio = <&pmi8998_gpios 1 0>;

	qcom,platform-bklight-en-gpio-invert;

};



&pmi8998_wled {

	qcom,disp-type-amoled;

};



&labibb {

	status = "ok";

	qcom,qpnp-labibb-mode = "amoled";

	qcom,swire-control;

};



&pmi8998_gpios {

	/* GPIO 1 for WLED power enable */

	gpio@c000 {

		qcom,mode = <1>;

		qcom,output-type = <0>;

		qcom,pull = <5>;

		qcom,vin-sel = <0>;

		qcom,out-strength = <1>;

		qcom,src-sel = <0>;

		qcom,invert = <0>;

		qcom,master-en = <1>;

		status = "okay";

	};

};



&dsi_dual_s6e3ha3_amoled_cmd {

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

	qcom,mdss-dsi-bl-min-level = <1>;

	qcom,mdss-dsi-bl-max-level = <255>;

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;

};



&i2c_5 {

	status = "okay";

	st_fts@49 {

		compatible = "st,fts";

		reg = <0x49>;

		interrupt-parent = <&tlmm>;

		interrupts = <125 0x2008>;

		vdd-supply = <&pm8998_l6>;

		avdd-supply = <&pm8998_l28>;

		pinctrl-names = "pmx_ts_active", "pmx_ts_suspend";

		pinctrl-0 = <&ts_active>;

		pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;

		st,irq-gpio = <&tlmm 125 0x2008>;

		st,reset-gpio = <&tlmm 89 0x00>;

		st,regulator_dvdd = "vdd";

		st,regulator_avdd = "avdd";

	};

};



&soc {

	/* HDK835 do not use improveTouch. If do not remove this node,

	 * legacy TOUCH could not work.

	 */

	/delete-node/hbtp;

};