Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 7aa1be41 authored by Linux Build Service Account's avatar Linux Build Service Account
Browse files

Promotion of kernel.lnx.4.4-161222. 

CRs      Change ID                                   Subject
--------------------------------------------------------------------------------------------------------------
1103705   Id95a65cefc25174eaf2bcd9b3d97fd8d3e632adb   iio: rradc: Update charger die temperature coefficients
1103814   If51734ae27add47a856ca378faf11e54b81e4dcf   ARM: dts: msm: Enable context aware and quirks for A512
1104081   I2a17d95328bef91c4a5dd4dde418296efca44431   sched: Fix out of bounds array access in sched_reset_all
1102981   I69001073af6b72875f6d023a1eb754fe0a0e00a1   ARM: dts: msm: Enable camera for msmfalcon.
1059232   I92ace85ee7fd40c3f33f1b9f7bdd32469d990d84   USB: dwc3-msm: Add support for voting for PM_QOS_LATENCY
1103251   I604a94ed28cb8df389eea8815ba0b279c7b7603c   ARM: dts: msm: Update Venus PIL clock voting for MSMFALC
1088153   I3499b2ee5bb1ddb74fc94fa55d3f5a8170d72b98   ARM: dts: msm: Modify BT node for QRD interposer msm8998
1097836   I175d76cd193d649f8b91cdab5000f6e1c66de15e   cfg80211: Define macro to indicate support for update co
1085388   I2f083a399b0d433ac7e8fd358f75ec0778d0396a   ARM: dts: msm: Disable clock gating on msmfalcon
1094763   Ib132eaa99e0632807124f44c8dd3bc90cf6710b0   ASoC: msm: Add routing controls for hfp, port mixer
1099759   Ib8fc3ed96e4704e71d9224a067fd8d9e88373cf0   drivers: mfd: clean up bootup info logs
1096945   I8fc3f646a0127ec705239be6a7de858a4f805acc   wil6210: Block write ioctl to the card by default
1059232   I40a86a062910253401dc4a59f7ae84c518eebb5e   ARM: dts: msm: Allow only wfi based on USB irq load for
1102504   Ia995e60b8d8d335239be0a35876d1becfd9a0f3c   soc: qcom: glink_pkt: Remove BUG_ON in glink_pkt_write
1088153   Ibc1d54ca18c57a83c08e8a1eafc63e6aeb95f7c4   ARM: dts: msm: Enable blsp1_uart3_hs for QRD interposer
1086571   I70c5ec050f88e23c1d09fe0d19ac34a4a56977a1   ARM: dts: msm: Add battery profile for FG in qrd8998 int
1068294   I510c2fe7f763c8d44c67794c889c687df60398d7   regulator: gfx-ldo: support voltage based regulator oper
1100789   I84a936f834101ba2ad9e354c4d8df6d3c051a2f7   soc: qcom: glink_ssr: Add rx done for received packets
1094973   I98e443e894d81bcd815418f2a79723db14d87ce4   msm: ADSPRPC: Add channel for compute/modem DSP
1097863   Ib55302c8fc9dbf2a4114a793e17f9b2dc9ade37c   nl80211: Use different attrs for BSSID and random MAC ad
1096083   I22bc2803d1cfa57777dda41c6d635b60f2740fad   ARM: dts: msm: configure wled for mdss on falcon interpo
1097836   I184b8e13bc5f7e2ed21e5337673c6ba82cd2f4fe   cfg80211: Add support to update connection parameters

Change-Id: I9b9d04bbef27f5576bd29dde1fe8f9bbcd9c419f
CRs-Fixed: 1094763, 1100789, 1103814, 1103705, 1097863, 1096083, 1094973, 1097836, 1085388, 1099759, 1059232, 1096945, 1103251, 1102504, 1068294, 1088153, 1104081, 1086571, 1102981
parents 9982ad3f ba4fdd98

Documentation/devicetree/bindings/regulator/msm_gfx_ldo.txt

+2 −1
Original line number Diff line number Diff line
@@ -8,7 +8,8 @@ This document describes the bindings that apply for the GFX LDO regulator. 
- compatible

	Usage:      required

	Value type: <string>

	Definition: should be "qcom,msm8953-gfx-ldo" for MSM8953.

	Definition: should be "qcom,msm8953-gfx-ldo" for MSM8953 and

		    "qcom,msmfalcon-gfx-ldo" for MSMFALCON



- reg

	Usage:      required

Documentation/devicetree/bindings/usb/msm-ssusb.txt

+3 −0
Original line number Diff line number Diff line
@@ -60,6 +60,8 @@ Optional properties : 
	  should point to external connector device, which provide "USB-HOST"

	  cable events. A single phandle may be specified if a single connector

	  device provides both "USB" and "USB-HOST" events.

- qcom,pm-qos-latency: This represents max tolerable CPU latency in microsecs,

	which is used as a vote by driver to get max performance in perf mode.



Sub nodes:

- Sub node for "DWC3- USB3 controller".
@@ -84,6 +86,7 @@ Example MSM USB3.0 controller device node : 
		qcom,dwc-usb3-msm-tx-fifo-size = <29696>;

		qcom,usb-dbm = <&dbm_1p4>;

		qcom,lpm-to-suspend-delay-ms = <2>;

		qcom,pm-qos-latency = <2>;



		qcom,msm_bus,name = "usb3";

		qcom,msm_bus,num_cases = <2>;

arch/arm/boot/dts/qcom/msm8998-v2.1-interposer-msmfalcon-qrd.dts

+16 −0
Original line number Diff line number Diff line
@@ -146,3 +146,19 @@ 
		};

	};

};



/ {

	qrd_batterydata: qcom,battery-data {

		qcom,batt-id-range-pct = <15>;



		#include "fg-gen3-batterydata-qrd-skuk-4v4-3000mah.dtsi"

	};

};



&pmfalcon_fg {

	qcom,battery-data = <&qrd_batterydata>;

};



&pm2falcon_wled {

	qcom,led-strings-list = [00 01];

};

arch/arm/boot/dts/qcom/msm8998-v2.1-interposer-msmfalcon-qrd.dtsi

+13 −16
Original line number Diff line number Diff line
@@ -16,32 +16,29 @@ 


/ {

	bluetooth: bt_wcn3990 {

		status = "disabled";

		compatible = "qca,wcn3990";

		qca,bt-vdd-io-supply = <&pmfalcon_l13>;

		qca,bt-vdd-xtal-supply = <&pmfalcon_l9>;

		qca,bt-vdd-core-supply = <&pmfalcon_l9>;

		qca,bt-vdd-pa-supply = <&pmfalcon_l6>;

		qca,bt-vdd-ldo-supply = <&pmfalcon_l19>;

		qca,bt-vdd-core-supply = <&pmfalcon_l9_pin_ctrl>;

		qca,bt-vdd-pa-supply = <&pmfalcon_l6_pin_ctrl>;

		qca,bt-vdd-ldo-supply = <&pmfalcon_l19_pin_ctrl>;

		qca,bt-chip-pwd-supply = <&pm2falcon_bob_pin1>;

		clocks = <&clock_gcc clk_rf_clk2>;

		clock-names = "rf_clk2";



		qca,bt-vdd-io-voltage-level = <1800000 1800000>;

		qca,bt-vdd-xtal-voltage-level = <1800000 1800000>;

		qca,bt-vdd-core-voltage-level = <1800000 1800000>;

		qca,bt-vdd-pa-voltage-level = <1304000 1304000>;

		qca,bt-vdd-ldo-voltage-level = <3312000 3312000>;

		clocks = <&clock_gcc clk_rf_clk1>;

		clock-names = "rf_clk1";



		qca,bt-vdd-core-voltage-level = <1800000 1900000>;

		qca,bt-vdd-pa-voltage-level = <1304000 1370000>;

		qca,bt-vdd-ldo-voltage-level = <3312000 3400000>;

		qca,bt-chip-pwd-voltage-level = <3600000 3600000>;



		qca,bt-vdd-io-current-level = <1>; /* LPM/PFM */

		qca,bt-vdd-xtal-current-level = <1>; /* LPM/PFM */

		qca,bt-vdd-core-current-level = <1>; /* LPM/PFM */

		qca,bt-vdd-pa-current-level = <1>; /* LPM/PFM */

		qca,bt-vdd-ldo-current-level = <1>; /* LPM/PFM */

	};

};



&blsp1_uart3_hs {

	status = "ok";

};



&uartblsp2dm1 {

	status = "ok";

	pinctrl-names = "default";

arch/arm/boot/dts/qcom/msmfalcon-camera-sensor-cdp.dtsi

0 → 100644
+384 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2016, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&soc {

	led_flash0: qcom,camera-flash@0 {

		cell-index = <0>;

		compatible = "qcom,camera-flash";

		qcom,flash-source = <&pm2falcon_flash0 &pm2falcon_flash1>;

		qcom,torch-source = <&pm2falcon_torch0 &pm2falcon_torch1>;

		qcom,switch-source = <&pm2falcon_switch0>;

		status = "ok";

	};



	led_flash1: qcom,camera-flash@1 {

		cell-index = <1>;

		compatible = "qcom,camera-flash";

		qcom,flash-source = <&pm2falcon_flash2>;

		qcom,torch-source = <&pm2falcon_torch2>;

		qcom,switch-source = <&pm2falcon_switch1>;

		status = "ok";

	};

};



&cci {

	actuator0: qcom,actuator@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

		gpios = <&tlmm 50 0>;

		qcom,gpio-vaf = <0>;

		qcom,gpio-req-tbl-num = <0>;

		qcom,gpio-req-tbl-flags = <0>;

		qcom,gpio-req-tbl-label = "CAM_VAF";

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_actuator_vaf_active>;

		pinctrl-1 = <&cam_actuator_vaf_suspend>;

	};



	actuator1: qcom,actuator@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,actuator";

		qcom,cci-master = <1>;

		gpios = <&tlmm 50 0>;

		qcom,gpio-vaf = <0>;

		qcom,gpio-req-tbl-num = <0>;

		qcom,gpio-req-tbl-flags = <0>;

		qcom,gpio-req-tbl-label = "CAM_VAF";

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_actuator_vaf_active>;

		pinctrl-1 = <&cam_actuator_vaf_suspend>;

	};



	actuator2: qcom,actuator@2 {

		cell-index = <2>;

		reg = <0x2>;

		compatible = "qcom,actuator";

		qcom,cci-master = <1>;

		gpios = <&tlmm 50 0>;

		qcom,gpio-vaf = <0>;

		qcom,gpio-req-tbl-num = <0>;

		qcom,gpio-req-tbl-flags = <0>;

		qcom,gpio-req-tbl-label = "CAM_VAF";

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_actuator_vaf_active>;

		pinctrl-1 = <&cam_actuator_vaf_suspend>;

	};



	ois0: qcom,ois@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,ois";

		qcom,cci-master = <0>;

		gpios = <&tlmm 50 0>;

		qcom,gpio-vaf = <0>;

		qcom,gpio-req-tbl-num = <0>;

		qcom,gpio-req-tbl-flags = <0>;

		qcom,gpio-req-tbl-label = "CAM_VAF";

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_actuator_vaf_active>;

		pinctrl-1 = <&cam_actuator_vaf_suspend>;

		status = "disabled";

	};



	eeprom0: qcom,eeprom@0 {

		cell-index = <0>;

		reg = <0>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pmfalcon_l11>;

		cam_vana-supply = <&pm2falcon_bob>;

		cam_vdig-supply = <&pmfalcon_s5>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <1780000 3300000 1350000>;

		qcom,cam-vreg-max-voltage = <1950000 3600000 1350000>;

		qcom,cam-vreg-op-mode = <105000 80000 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_rear_active

				&cam_actuator_vaf_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_rear_suspend

				&cam_actuator_vaf_suspend>;

		gpios = <&tlmm 32 0>,

			<&tlmm 46 0>,

			<&pm2falcon_gpios 4 0>,

			<&tlmm 51 0>,

			<&tlmm 50 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vdig = <2>;

		qcom,gpio-vana = <3>;

		qcom,gpio-vaf = <4>;

		qcom,gpio-req-tbl-num = <0 1 2 3 4>;

		qcom,gpio-req-tbl-flags = <1 0 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0",

					"CAM_VDIG",

					"CAM_VANA",

					"CAM_VAF";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_mmss MCLK0_CLK_SRC>,

				<&clock_mmss MMSS_CAMSS_MCLK0_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	eeprom1: qcom,eeprom@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pmfalcon_l11>;

		cam_vana-supply = <&pm2falcon_bob>;

		cam_vdig-supply = <&pmfalcon_s5>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <1780000 3300000 1350000>;

		qcom,cam-vreg-max-voltage = <1950000 3600000 1350000>;

		qcom,cam-vreg-op-mode = <105000 80000 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

				&cam_sensor_rear2_active>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

				&cam_sensor_rear2_suspend>;

		gpios = <&tlmm 34 0>,

		    <&tlmm 48 0>,

		    <&pm2falcon_gpios 3 0>,

		    <&tlmm 51 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vdig = <2>;

		qcom,gpio-vana = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK",

					"CAM_RESET",

					"CAM_VDIG",

					"CAM_VANA";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_mmss MCLK2_CLK_SRC>,

		    <&clock_mmss MMSS_CAMSS_MCLK2_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	eeprom2: qcom,eeprom@2 {

		cell-index = <2>;

		reg = <0x2>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pmfalcon_l11>;

		cam_vana-supply = <&pm2falcon_bob>;

		cam_vdig-supply = <&pmfalcon_s5>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <1780000 3300000 1350000>;

		qcom,cam-vreg-max-voltage = <1950000 3600000 1350000>;

		qcom,cam-vreg-op-mode = <105000 80000 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_front_active

				&cam_actuator_vaf_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				 &cam_sensor_front_suspend

				&cam_actuator_vaf_suspend>;

		gpios = <&tlmm 33 0>,

			<&tlmm 47 0>,

			<&pmfalcon_gpios 3 0>,

			<&tlmm 44 0>,

			<&tlmm 50 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vdig = <2>;

		qcom,gpio-vana = <3>;

		qcom,gpio-vaf = <4>;

		qcom,gpio-req-tbl-num = <0 1 2 3 4>;

		qcom,gpio-req-tbl-flags = <1 0 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2",

					"CAM_VDIG",

					"CAM_VANA",

					"CAM_VAF";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_mmss MCLK1_CLK_SRC>,

			<&clock_mmss MMSS_CAMSS_MCLK1_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	qcom,camera@0 {

		cell-index = <0>;

		compatible = "qcom,camera";

		reg = <0x0>;

		qcom,csiphy-sd-index = <0>;

		qcom,csid-sd-index = <0>;

		qcom,mount-angle = <270>;

		qcom,led-flash-src = <&led_flash0>;

		qcom,actuator-src = <&actuator0>;

		qcom,ois-src = <&ois0>;

		qcom,eeprom-src = <&eeprom0>;

		cam_vio-supply = <&pmfalcon_l11>;

		cam_vana-supply = <&pm2falcon_bob>;

		cam_vdig-supply = <&pmfalcon_s5>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <1780000 3300000 1350000>;

		qcom,cam-vreg-max-voltage = <1950000 3600000 1350000>;

		qcom,cam-vreg-op-mode = <105000 80000 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				 &cam_sensor_rear_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				 &cam_sensor_rear_suspend>;

		gpios = <&tlmm 32 0>,

			<&tlmm 46 0>,

			<&pm2falcon_gpios 4 0>,

			<&tlmm 51 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vdig = <2>;

		qcom,gpio-vana = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0",

					"CAM_VDIG",

					"CAM_VANA";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_mmss MCLK0_CLK_SRC>,

				<&clock_mmss MMSS_CAMSS_MCLK0_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	qcom,camera@1 {

		cell-index = <1>;

		compatible = "qcom,camera";

		reg = <0x1>;

		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <2>;

		qcom,mount-angle = <90>;

		qcom,actuator-src = <&actuator1>;

		qcom,eeprom-src = <&eeprom1>;

		cam_vio-supply = <&pmfalcon_l11>;

		cam_vana-supply = <&pm2falcon_bob>;

		cam_vdig-supply = <&pmfalcon_s5>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <1780000 3300000 1350000>;

		qcom,cam-vreg-max-voltage = <1950000 3600000 1350000>;

		qcom,cam-vreg-op-mode = <105000 80000 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

				 &cam_sensor_rear2_active>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

				 &cam_sensor_rear2_suspend>;

		gpios = <&tlmm 34 0>,

			<&tlmm 48 0>,

			<&pm2falcon_gpios 3 0>,

			<&tlmm 51 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vdig = <2>;

		qcom,gpio-vana = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK",

					  "CAM_RESET",

					  "CAM_VDIG",

					  "CAM_VANA";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_mmss MCLK2_CLK_SRC>,

			<&clock_mmss MMSS_CAMSS_MCLK2_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	qcom,camera@2 {

		cell-index = <2>;

		compatible = "qcom,camera";

		reg = <0x02>;

		qcom,csiphy-sd-index = <2>;

		qcom,csid-sd-index = <2>;

		qcom,mount-angle = <90>;

		qcom,actuator-src = <&actuator2>;

		qcom,eeprom-src = <&eeprom2>;

		cam_vio-supply = <&pmfalcon_l11>;

		cam_vana-supply = <&pm2falcon_bob>;

		cam_vdig-supply = <&pmfalcon_s5>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <1780000 3300000 1350000>;

		qcom,cam-vreg-max-voltage = <1950000 3600000 1350000>;

		qcom,cam-vreg-op-mode = <105000 80000 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_front_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				 &cam_sensor_front_suspend>;

		gpios = <&tlmm 33 0>,

			<&tlmm 47 0>,

			<&pm2falcon_gpios 3 0>,

			<&tlmm 51 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vdig = <2>;

		qcom,gpio-vana = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2",

					"CAM_VDIG",

					"CAM_VANA";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_mmss MCLK1_CLK_SRC>,

			<&clock_mmss MMSS_CAMSS_MCLK1_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};

};



&pm2falcon_gpios {

	gpio@c300 { /* GPIO4 -CAMERA SENSOR 0 VDIG*/

		qcom,mode = <1>;                /* Output */

		qcom,pull = <5>;                /* No Pull */

		qcom,vin-sel = <0>;             /* VIN1 GPIO_LV */

		qcom,src-sel = <0>;             /* GPIO */

		qcom,invert = <0>;              /* Invert */

		qcom,master-en = <1>;           /* Enable GPIO */

		status = "ok";

	};



	gpio@c200 { /* GPIO3 -CAMERA SENSOR 2 VDIG*/

		qcom,mode = <1>;                /* Output */

		qcom,pull = <5>;                /* No Pull */

		qcom,vin-sel = <0>;             /* VIN1 GPIO_LV */

		qcom,src-sel = <0>;             /* GPIO */

		qcom,invert = <0>;              /* Invert */

		qcom,master-en = <1>;           /* Enable GPIO */

		status = "ok";

	};

};