Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 7a99b2fb authored by xiaonian's avatar xiaonian Committed by Gerrit - the friendly Code Review server
Browse files

ARM: dts: msm: Add storage node for QRD interposer msmcobalt 



Add UFS and sdhc2 node for QRD interposer msmcobalt. Config
corresponding GPIO to no pull and change its polarity to
enable SD card detection.

CRs-Fixed: 1086932
Change-Id: Ibf9ac87dc605266a90f7364b6618297e66902b39
Signed-off-by: default avatarxiaonian <xiaonian@codeaurora.org>
parent 32eed904

arch/arm/boot/dts/qcom/msmcobalt-v2.1-interposer-msmfalcon-qrd.dtsi

+73 −0
Original line number Diff line number Diff line
@@ -18,3 +18,76 @@ 
	pinctrl-names = "default";

	pinctrl-0 = <&uart_console_active>;

};



&ufsphy1 {

	vdda-phy-supply = <&pmcobalt_l1>;

	vdda-pll-supply = <&pmcobalt_l2>;

	vddp-ref-clk-supply = <&pmcobalt_l26>;

	vdda-phy-max-microamp = <51400>;

	vdda-pll-max-microamp = <14600>;

	vddp-ref-clk-max-microamp = <100>;

	vddp-ref-clk-always-on;

	status = "ok";

};



&ufs1 {

	vdd-hba-supply = <&gdsc_ufs>;

	vdd-hba-fixed-regulator;

	vcc-supply = <&pmcobalt_l20>;

	vccq-supply = <&pmcobalt_l26>;

	vccq2-supply = <&pmcobalt_s4>;

	vcc-max-microamp = <750000>;

	vccq-max-microamp = <560000>;

	vccq2-max-microamp = <750000>;

	status = "ok";

};



&ufs_ice {

	status = "ok";

};



&sdc2_cd_on {

	mux {

		pins = "gpio54";

	};



	config {

		pins = "gpio54";

		/delete-property/ bias-pull-up;

		bias-disable;

	};

};



&sdc2_cd_off {

	mux {

		pins = "gpio54";

	};



	config {

		pins = "gpio54";

		/delete-property/ bias-pull-up;

		bias-disable;

	};

};



&sdhc_2 {

	vdd-supply = <&pmcobalt_l21>;

	qcom,vdd-voltage-level = <2950000 2960000>;

	qcom,vdd-current-level = <200 800000>;



	vdd-io-supply = <&pmcobalt_l13>;

	qcom,vdd-io-voltage-level = <1808000 2960000>;

	qcom,vdd-io-current-level = <200 22000>;



	pinctrl-names = "active", "sleep";

	pinctrl-0 = <&sdc2_clk_on  &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;

	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;



	qcom,clk-rates = <400000 20000000 25000000

				50000000 100000000 200000000>;

	qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104";



	cd-gpios = <&tlmm 54 0x0>;



	status = "ok";

};