Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 7994fe55 authored by Zubair Lutfullah Kakakhel's avatar Zubair Lutfullah Kakakhel Committed by David S. Miller
Browse files

dm9000: Add regulator and reset support to dm9000 



In boards, the dm9000 chip's power and reset can be controlled by gpio.

It makes sense to add them to the dm9000 driver and let dt be used to
enable power and reset the phy.

Signed-off-by: default avatarZubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 7eb35b14

Documentation/devicetree/bindings/net/davicom-dm9000.txt

+4 −0
Original line number Diff line number Diff line
@@ -11,6 +11,8 @@ Required properties: 
Optional properties:

- davicom,no-eeprom : Configuration EEPROM is not available

- davicom,ext-phy : Use external PHY

- reset-gpios : phandle of gpio that will be used to reset chip during probe

- vcc-supply : phandle of regulator that will be used to enable power to chip



Example:
@@ -21,4 +23,6 @@ Example: 
		interrupts = <7 4>;

		local-mac-address = [00 00 de ad be ef];

		davicom,no-eeprom;

		reset-gpios = <&gpf 12 GPIO_ACTIVE_LOW>;

		vcc-supply = <&eth0_power>;

	};

drivers/net/ethernet/davicom/dm9000.c

+40 −0
Original line number Diff line number Diff line
@@ -36,6 +36,9 @@ 
#include <linux/platform_device.h>

#include <linux/irq.h>

#include <linux/slab.h>

#include <linux/regulator/consumer.h>

#include <linux/gpio.h>

#include <linux/of_gpio.h>



#include <asm/delay.h>

#include <asm/irq.h>
@@ -1426,11 +1429,48 @@ dm9000_probe(struct platform_device *pdev) 
	struct dm9000_plat_data *pdata = dev_get_platdata(&pdev->dev);

	struct board_info *db;	/* Point a board information structure */

	struct net_device *ndev;

	struct device *dev = &pdev->dev;

	const unsigned char *mac_src;

	int ret = 0;

	int iosize;

	int i;

	u32 id_val;

	int reset_gpios;

	enum of_gpio_flags flags;

	struct regulator *power;



	power = devm_regulator_get(dev, "vcc");

	if (IS_ERR(power)) {

		if (PTR_ERR(power) == -EPROBE_DEFER)

			return -EPROBE_DEFER;

		dev_dbg(dev, "no regulator provided\n");

	} else {

		ret = regulator_enable(power);

		if (ret != 0) {

			dev_err(dev,

				"Failed to enable power regulator: %d\n", ret);

			return ret;

		}

		dev_dbg(dev, "regulator enabled\n");

	}



	reset_gpios = of_get_named_gpio_flags(dev->of_node, "reset-gpios", 0,

					      &flags);

	if (gpio_is_valid(reset_gpios)) {

		ret = devm_gpio_request_one(dev, reset_gpios, flags,

					    "dm9000_reset");

		if (ret) {

			dev_err(dev, "failed to request reset gpio %d: %d\n",

				reset_gpios, ret);

			return -ENODEV;

		}



		/* According to manual PWRST# Low Period Min 1ms */

		msleep(2);

		gpio_set_value(reset_gpios, 1);

		/* Needs 3ms to read eeprom when PWRST is deasserted */

		msleep(4);

	}



	if (!pdata) {

		pdata = dm9000_parse_dt(&pdev->dev);