Merge 0ada8dde65024971fbdc3d38c332945610ccf424 on remote branch (6cbd58e2) · Commits · e / devices / android_kernel_sony_msm8998

fw/htt.h

+259 −14

Original line number	Diff line number	Diff line
		@@ -191,9 +191,13 @@
		* 3.70 Add AST1-AST3 fields to HTT_T2H PEER_MAP_V2 msg
		* 3.71 Add rx offload engine / flow search engine htt setup message defs for
		* HTT_H2T_MSG_TYPE_RX_FSE_SETUP_CFG, HTT_H2T_MSG_TYPE_RX_FSE_OPERATION_CFG
		* 3.72 Add tx_retry_cnt fields to htt_tx_offload_deliver_ind_hdr_t and
		* htt_tx_data_hdr_information
		* 3.73 Add channel pre-calibration data upload and download messages defs for
		* HTT_T2H_MSG_TYPE_CHAN_CALDATA and HTT_H2T_MSG_TYPE_CHAN_CALDATA
		*/
		#define HTT_CURRENT_VERSION_MAJOR 3
		#define HTT_CURRENT_VERSION_MINOR 71
		#define HTT_CURRENT_VERSION_MINOR 73

		#define HTT_NUM_TX_FRAG_DESC 1024

		@@ -534,6 +538,7 @@ enum htt_h2t_msg_type {
		HTT_H2T_MSG_TYPE_PPDU_STATS_CFG = 0x11,
		HTT_H2T_MSG_TYPE_RX_FSE_SETUP_CFG = 0x12,
		HTT_H2T_MSG_TYPE_RX_FSE_OPERATION_CFG = 0x13,
		HTT_H2T_MSG_TYPE_CHAN_CALDATA = 0x14,

		/* keep this last */
		HTT_H2T_NUM_MSGS
		@@ -6338,6 +6343,7 @@ enum htt_t2h_msg_type {
		* to provide to the monitor mode interface.
		*/
		HTT_T2H_MSG_TYPE_TX_OFFLOAD_DELIVER_IND = 0x25,
		HTT_T2H_MSG_TYPE_CHAN_CALDATA = 0x26,

		HTT_T2H_MSG_TYPE_TEST,
		/* keep this last */
		@@ -7855,7 +7861,9 @@ PREPACK struct htt_tx_offload_deliver_ind_hdr_t
		status:3, /* [2:0] */
		format:1, /* [3] 0: 802.3 format, 1: 802.11 format */
		tx_mpdu_bytes:16, /* [19:4] */
		reserved_4:12; /* [31:20] */
		/* Indicates retry count of offloaded/local generated Data tx frames */
		tx_retry_cnt:6, /* [25:20] */
		reserved_4:6; /* [31:26] */
		} POSTPACK;

		/* FW offload deliver ind message header fields */
		@@ -7905,6 +7913,8 @@ PREPACK struct htt_tx_offload_deliver_ind_hdr_t
		#define HTT_FW_OFFLOAD_IND_FORMAT_S 3
		#define HTT_FW_OFFLOAD_IND_TX_MPDU_BYTES_M 0x000ffff0
		#define HTT_FW_OFFLOAD_IND_TX_MPDU_BYTES_S 4
		#define HTT_FW_OFFLOAD_IND_TX_RETRY_CNT_M 0x03f00000
		#define HTT_FW_OFFLOAD_IND_TX_RETRY_CNT_S 20

		#define HTT_FW_OFFLOAD_IND_PHY_TIMESTAMP_L32_SET(word, value) \
		do { \
		@@ -8056,6 +8066,14 @@ PREPACK struct htt_tx_offload_deliver_ind_hdr_t
		#define HTT_FW_OFFLOAD_IND_TX_MPDU_BYTES_GET(word) \
		(((word) & HTT_FW_OFFLOAD_IND_TX_MPDU_BYTES_M) >> HTT_FW_OFFLOAD_IND_TX_MPDU_BYTES_S)

		#define HTT_FW_OFFLOAD_IND_TX_RETRY_CNT_SET(word, value) \
		do { \
		HTT_CHECK_SET_VAL(HTT_FW_OFFLOAD_IND_TX_RETRY_CNT, value); \
		(word) \|= (value) << HTT_FW_OFFLOAD_IND_TX_RETRY_CNT_S; \
		} while (0)
		#define HTT_FW_OFFLOAD_IND_TX_RETRY_CNT_GET(word) \
		(((word) & HTT_FW_OFFLOAD_IND_TX_RETRY_CNT_M) >> HTT_FW_OFFLOAD_IND_TX_RETRY_CNT_S)


		/*
		* @brief target -> host rx reorder flush message definition
		@@ -9500,7 +9518,10 @@ PREPACK struct htt_tx_data_hdr_information {
		sgi : 1, /* [23] */
		ldpc : 1, /* [24] */
		beamformed: 1, /* [25] */
		reserved_1: 6; /* [31:26] */
		/* tx_retry_cnt:
		* Indicates retry count of data tx frames provided by the host.
		*/
		tx_retry_cnt: 6; /* [31:26] */
		A_UINT32 /* word 2 */
		framectrl:16, /* [15: 0] */
		seqno:16; /* [31:16] */
		@@ -9690,6 +9711,8 @@ PREPACK struct htt_tx_compl_ind_append_tx_tsf64 {
		#define HTT_FW_TX_DATA_HDR_LDPC_S 24
		#define HTT_FW_TX_DATA_HDR_BEAMFORMED_M 0x02000000
		#define HTT_FW_TX_DATA_HDR_BEAMFORMED_S 25
		#define HTT_FW_TX_DATA_HDR_TX_RETRY_CNT_M 0xfc000000
		#define HTT_FW_TX_DATA_HDR_TX_RETRY_CNT_S 26

		/* DWORD two */
		#define HTT_FW_TX_DATA_HDR_FRAMECTRL_M 0x0000ffff
		@@ -9789,6 +9812,14 @@ PREPACK struct htt_tx_compl_ind_append_tx_tsf64 {
		#define HTT_FW_TX_DATA_HDR_BEAMFORMED_GET(word) \
		(((word) & HTT_FW_TX_DATA_HDR_BEAMFORMED_M) >> HTT_FW_TX_DATA_HDR_BEAMFORMED_S)

		#define HTT_FW_TX_DATA_HDR_TX_RETRY_CNT_SET(word, value) \
		do { \
		HTT_CHECK_SET_VAL(HTT_FW_TX_DATA_HDR_TX_RETRY_CNT, value); \
		(word) \|= (value) << HTT_FW_TX_DATA_HDR_TX_RETRY_CNT_S; \
		} while (0)
		#define HTT_FW_TX_DATA_HDR_TX_RETRY_CNT_GET(word) \
		(((word) & HTT_FW_TX_DATA_HDR_TX_RETRY_CNT_M) >> HTT_FW_TX_DATA_HDR_TX_RETRY_CNT_S)

		#define HTT_FW_TX_DATA_HDR_FRAMECTRL_SET(word, value) \
		do { \
		HTT_CHECK_SET_VAL(HTT_FW_TX_DATA_HDR_FRAMECTRL, value); \
		@@ -13019,27 +13050,39 @@ struct htt_ul_ofdma_user_info_v0 {
		A_UINT32 word1;
		};

		#define HTT_UL_OFDMA_USER_INFO_V0_BITMAP_W0 \
		A_UINT32 w0_fw_rsvd:30; \
		A_UINT32 w0_valid:1; \
		A_UINT32 w0_version:1;
		struct htt_ul_ofdma_user_info_v0_bitmap_w0 {
		HTT_UL_OFDMA_USER_INFO_V0_BITMAP_W0
		};

		#define HTT_UL_OFDMA_USER_INFO_V0_BITMAP_W1 \
		A_UINT32 w1_nss:3; \
		A_UINT32 w1_mcs:4; \
		A_UINT32 w1_ldpc:1; \
		A_UINT32 w1_dcm:1; \
		A_UINT32 w1_ru_start:7; \
		A_UINT32 w1_ru_size:3; \
		A_UINT32 w1_trig_type:4; \
		A_UINT32 w1_unused:9;
		struct htt_ul_ofdma_user_info_v0_bitmap_w1 {
		HTT_UL_OFDMA_USER_INFO_V0_BITMAP_W1
		};

		/* htt_up_ofdma_user_info_v0_bitmap shows what bitfields are within the info */
		PREPACK struct htt_ul_ofdma_user_info_v0_bitmap {
		union {
		A_UINT32 word0;
		struct {
		A_UINT32 w0_fw_rsvd:30;
		A_UINT32 w0_valid:1;
		A_UINT32 w0_version:1;
		HTT_UL_OFDMA_USER_INFO_V0_BITMAP_W0
		};
		};
		union {
		A_UINT32 word1;
		struct {
		A_UINT32 w1_nss:3;
		A_UINT32 w1_mcs:4;
		A_UINT32 w1_ldpc:1;
		A_UINT32 w1_dcm:1;
		A_UINT32 w1_ru_start:7;
		A_UINT32 w1_ru_size:3;
		A_UINT32 w1_trig_type:4;
		A_UINT32 w1_unused:9;
		HTT_UL_OFDMA_USER_INFO_V0_BITMAP_W1
		};
		};
		} POSTPACK;
		@@ -13191,5 +13234,207 @@ enum HTT_UL_OFDMA_TRIG_TYPE {
		((word) \|= ((_val) << HTT_UL_OFDMA_USER_INFO_V0_W1_RU_TRIG_TYP_S)); \
		} while (0)

		/**
		* @brief target -> host channel calibration data message
		* @brief host -> target channel calibration data message
		*
		* @details
		* The following field definitions describe the format of the channel
		* calibration data message sent from the target to the host when
		* MSG_TYPE is HTT_T2H_MSG_TYPE_CHAN_CALDATA, and sent from the host
		* to the target when MSG_TYPE is HTT_H2T_MSG_TYPE_CHAN_CALDATA.
		* The message is defined as htt_chan_caldata_msg followed by a variable
		* number of 32-bit character values.
		*
		* \|31 21\|20\|19 16\|15 13\| 12\|11 8\|7 0\|
		* \|------------------------------------------------------------------\|
		* \| rsv \| A\| frag \| rsv \|ck_v\| sub_type\| msg type \|
		* \|------------------------------------------------------------------\|
		* \| payload size \| mhz \|
		* \|------------------------------------------------------------------\|
		* \| center frequency 2 \| center frequency 1 \|
		* \|------------------------------------------------------------------\|
		* \| check sum \|
		* \|------------------------------------------------------------------\|
		* \| payload \|
		* \|------------------------------------------------------------------\|
		* message info field:
		* - MSG_TYPE
		* Bits 7:0
		* Purpose: identifies this as a channel calibration data message
		* Value: HTT_T2H_MSG_TYPE_CHAN_CALDATA (0x15) or
		* HTT_H2T_MSG_TYPE_CHAN_CALDATA (0xb)
		* - SUB_TYPE
		* Bits 11:8
		* Purpose: T2H: indicates whether target is providing chan cal data
		* to the host to store, or requesting that the host
		* download previously-stored data.
		* H2T: indicates whether the host is providing the requested
		* channel cal data, or if it is rejecting the data
		* request because it does not have the requested data.
		* Value: see HTT_T2H_MSG_CHAN_CALDATA_xxx defs
		* - CHKSUM_VALID
		* Bit 12
		* Purpose: indicates if the checksum field is valid
		* value:
		* - FRAG
		* Bit 19:16
		* Purpose: indicates the fragment index for message
		* value: 0 for first fragment, 1 for second fragment, ...
		* - APPEND
		* Bit 20
		* Purpose: indicates if this is the last fragment
		* value: 0 = final fragment, 1 = more fragments will be appended
		*
		* channel and payload size field
		* - MHZ
		* Bits 15:0
		* Purpose: indicates the channel primary frequency
		* Value:
		* - PAYLOAD_SIZE
		* Bits 31:16
		* Purpose: indicates the bytes of calibration data in payload
		* Value:
		*
		* center frequency field
		* - CENTER FREQUENCY 1
		* Bits 15:0
		* Purpose: indicates the channel center frequency
		* Value: channel center frequency, in MHz units
		* - CENTER FREQUENCY 2
		* Bits 31:16
		* Purpose: indicates the secondary channel center frequency,
		* only for 11acvht 80plus80 mode
		* Value: secondary channel center frequeny, in MHz units, if applicable
		*
		* checksum field
		* - CHECK_SUM
		* Bits 31:0
		* Purpose: check the payload data, it is just for this fragment.
		* This is intended for the target to check that the channel
		* calibration data returned by the host is the unmodified data
		* that was previously provided to the host by the target.
		* value: checksum of fragment payload
		*/
		PREPACK struct htt_chan_caldata_msg {
		/* DWORD 0: message info */
		A_UINT32
		msg_type: 8,
		sub_type: 4 ,
		chksum_valid: 1, /** 1:valid, 0:invalid */
		reserved1: 3,
		frag_idx: 4, /** fragment index for calibration data */
		appending: 1, /** 0: no fragment appending,
		* 1: extra fragment appending */
		reserved2: 11;

		/* DWORD 1: channel and payload size */
		A_UINT32
		mhz: 16, /** primary 20 MHz channel frequency in mhz */
		payload_size: 16; /** unit: bytes */

		/* DWORD 2: center frequency */
		A_UINT32
		band_center_freq1: 16, /** Center frequency 1 in MHz */
		band_center_freq2: 16; /** Center frequency 2 in MHz,
		* valid only for 11acvht 80plus80 mode */

		/* DWORD 3: check sum */
		A_UINT32 chksum;

		/* variable length for calibration data */
		A_UINT32 payload[1/* or more */];
		} POSTPACK;

		/* T2H SUBTYPE */
		#define HTT_T2H_MSG_CHAN_CALDATA_REQ 0
		#define HTT_T2H_MSG_CHAN_CALDATA_UPLOAD 1

		/* H2T SUBTYPE */
		#define HTT_H2T_MSG_CHAN_CALDATA_REJ 0
		#define HTT_H2T_MSG_CHAN_CALDATA_DOWNLOAD 1

		#define HTT_CHAN_CALDATA_MSG_SUB_TYPE_S 8
		#define HTT_CHAN_CALDATA_MSG_SUB_TYPE_M 0x00000f00
		#define HTT_CHAN_CALDATA_MSG_SUB_TYPE_GET(_var) \
		(((_var) & HTT_CHAN_CALDATA_MSG_SUB_TYPE_M) >> HTT_CHAN_CALDATA_MSG_SUB_TYPE_S)
		#define HTT_CHAN_CALDATA_MSG_SUB_TYPE_SET(_var, _val) \
		do { \
		HTT_CHECK_SET_VAL(HTT_CHAN_CALDATA_MSG_SUB_TYPE, _val); \
		((_var) \|= ((_val) << HTT_CHAN_CALDATA_MSG_SUB_TYPE_S)); \
		} while (0)

		#define HTT_CHAN_CALDATA_MSG_CHKSUM_V_S 12
		#define HTT_CHAN_CALDATA_MSG_CHKSUM_V_M 0x00001000
		#define HTT_CHAN_CALDATA_MSG_CHKSUM_V_GET(_var) \
		(((_var) & HTT_CHAN_CALDATA_MSG_CHKSUM_V_M) >> HTT_CHAN_CALDATA_MSG_CHKSUM_V_S)
		#define HTT_CHAN_CALDATA_MSG_CHKSUM_V_SET(_var, _val) \
		do { \
		HTT_CHECK_SET_VAL(HTT_CHAN_CALDATA_MSG_CHKSUM_V, _val); \
		((_var) \|= ((_val) << HTT_CHAN_CALDATA_MSG_CHKSUM_V_S)); \
		} while (0)


		#define HTT_CHAN_CALDATA_MSG_FRAG_IDX_S 16
		#define HTT_CHAN_CALDATA_MSG_FRAG_IDX_M 0x000f0000
		#define HTT_CHAN_CALDATA_MSG_FRAG_IDX_GET(_var) \
		(((_var) & HTT_CHAN_CALDATA_MSG_FRAG_IDX_M) >> HTT_CHAN_CALDATA_MSG_FRAG_IDX_S)
		#define HTT_CHAN_CALDATA_MSG_FRAG_IDX_SET(_var, _val) \
		do { \
		HTT_CHECK_SET_VAL(HTT_CHAN_CALDATA_MSG_FRAG_IDX, _val); \
		((_var) \|= ((_val) << HTT_CHAN_CALDATA_MSG_FRAG_IDX_S)); \
		} while (0)

		#define HTT_CHAN_CALDATA_MSG_APPENDING_S 20
		#define HTT_CHAN_CALDATA_MSG_APPENDING_M 0x00100000
		#define HTT_CHAN_CALDATA_MSG_APPENDING_GET(_var) \
		(((_var) & HTT_CHAN_CALDATA_MSG_APPENDING_M) >> HTT_CHAN_CALDATA_MSG_APPENDING_S)
		#define HTT_CHAN_CALDATA_MSG_APPENDING_SET(_var, _val) \
		do { \
		HTT_CHECK_SET_VAL(HTT_CHAN_CALDATA_MSG_APPENDING, _val); \
		((_var) \|= ((_val) << HTT_CHAN_CALDATA_MSG_APPENDING_S)); \
		} while (0)

		#define HTT_CHAN_CALDATA_MSG_MHZ_S 0
		#define HTT_CHAN_CALDATA_MSG_MHZ_M 0x0000ffff
		#define HTT_CHAN_CALDATA_MSG_MHZ_GET(_var) \
		(((_var) & HTT_CHAN_CALDATA_MSG_MHZ_M) >> HTT_CHAN_CALDATA_MSG_MHZ_S)
		#define HTT_CHAN_CALDATA_MSG_MHZ_SET(_var, _val) \
		do { \
		HTT_CHECK_SET_VAL(HTT_CHAN_CALDATA_MSG_MHZ, _val); \
		((_var) \|= ((_val) << HTT_CHAN_CALDATA_MSG_MHZ_S)); \
		} while (0)


		#define HTT_CHAN_CALDATA_MSG_PLD_SIZE_S 16
		#define HTT_CHAN_CALDATA_MSG_PLD_SIZE_M 0xffff0000
		#define HTT_CHAN_CALDATA_MSG_PLD_SIZE_GET(_var) \
		(((_var) & HTT_CHAN_CALDATA_MSG_PLD_SIZE_M) >> HTT_CHAN_CALDATA_MSG_PLD_SIZE_S)
		#define HTT_CHAN_CALDATA_MSG_PLD_SIZE_SET(_var, _val) \
		do { \
		HTT_CHECK_SET_VAL(HTT_CHAN_CALDATA_MSG_PLD_SIZE, _val); \
		((_var) \|= ((_val) << HTT_CHAN_CALDATA_MSG_PLD_SIZE_S)); \
		} while (0)


		#define HTT_CHAN_CALDATA_MSG_FREQ1_S 0
		#define HTT_CHAN_CALDATA_MSG_FREQ1_M 0x0000ffff
		#define HTT_CHAN_CALDATA_MSG_FREQ1_GET(_var) \
		(((_var) & HTT_CHAN_CALDATA_MSG_FREQ1_M) >> HTT_CHAN_CALDATA_MSG_FREQ1_S)
		#define HTT_CHAN_CALDATA_MSG_FREQ1_SET(_var, _val) \
		do { \
		HTT_CHECK_SET_VAL(HTT_CHAN_CALDATA_MSG_FREQ1, _val); \
		((_var) \|= ((_val) << HTT_CHAN_CALDATA_MSG_FREQ1_S)); \
		} while (0)

		#define HTT_CHAN_CALDATA_MSG_FREQ2_S 16
		#define HTT_CHAN_CALDATA_MSG_FREQ2_M 0xffff0000
		#define HTT_CHAN_CALDATA_MSG_FREQ2_GET(_var) \
		(((_var) & HTT_CHAN_CALDATA_MSG_FREQ2_M) >> HTT_CHAN_CALDATA_MSG_FREQ2_S)
		#define HTT_CHAN_CALDATA_MSG_FREQ2_SET(_var, _val) \
		do { \
		HTT_CHECK_SET_VAL(HTT_CHAN_CALDATA_MSG_FREQ2, _val); \
		((_var) \|= ((_val) << HTT_CHAN_CALDATA_MSG_FREQ2_S)); \
		} while (0)

		#endif

fw/htt_ppdu_stats.h

+50 −4

Original line number	Diff line number	Diff line
		@@ -1513,6 +1513,45 @@ typedef enum HTT_PPDU_STATS_RESP_TYPE HTT_PPDU_STATS_RESP_TYPE;
		((_var) \|= ((_val) << HTT_PPDU_STATS_USER_CMPLTN_COMMON_TLV_RESP_TYPE_S)); \
		} while (0)

		#define HTT_PPDU_STATS_USER_CMPLTN_COMMON_TLV_MPROT_TYPE_M 0x0000e000
		#define HTT_PPDU_STATS_USER_CMPLTN_COMMON_TLV_MPROT_TYPE_S 13

		#define HTT_PPDU_STATS_USER_CMPLTN_COMMON_TLV_MPROT_TYPE_GET(_var) \
		(((_var) & HTT_PPDU_STATS_USER_CMPLTN_COMMON_TLV_MPROT_TYPE_M) >> \
		HTT_PPDU_STATS_USER_CMPLTN_COMMON_TLV_MPROT_TYPE_S)

		#define HTT_PPDU_STATS_USER_CMPLTN_COMMON_TLV_MPROT_TYPE_SET (_var , _val) \
		do { \
		HTT_CHECK_SET_VAL(HTT_PPDU_STATS_USER_CMPLTN_COMMON_TLV_MPROT_TYPE, _val); \
		((_var) \|= ((_val) << HTT_PPDU_STATS_USER_CMPLTN_COMMON_TLV_MPROT_TYPE_S)); \
		} while (0)

		#define HTT_PPDU_STATS_USER_CMPLTN_COMMON_TLV_RTS_SUCCESS_M 0x00010000
		#define HTT_PPDU_STATS_USER_CMPLTN_COMMON_TLV_RTS_SUCCESS_S 16

		#define HTT_PPDU_STATS_USER_CMPLTN_COMMON_TLV_RTS_SUCCESS_GET(_var) \
		(((_var) & HTT_PPDU_STATS_USER_CMPLTN_COMMON_TLV_RTS_SUCCESS_M) >> \
		HTT_PPDU_STATS_USER_CMPLTN_COMMON_TLV_RTS_SUCCESS_S)

		#define HTT_PPDU_STATS_USER_CMPLTN_COMMON_TLV_RTS_SUCCESS_SET (_var, _val) \
		do { \
		HTT_CHECK_SET_VAL(HTT_PPDU_STATS_USER_CMPLTN_COMMON_TLV_RTS_SUCCESS, _val); \
		((_var) \|= ((_val) << HTT_PPDU_STATS_USER_CMPLTN_COMMON_TLV_RTS_SUCCESS_S)); \
		} while (0)

		#define HTT_PPDU_STATS_USER_CMPLTN_COMMON_TLV_RTS_FAILURE_M 0x00020000
		#define HTT_PPDU_STATS_USER_CMPLTN_COMMON_TLV_RTS_FAILURE_S 17

		#define HTT_PPDU_STATS_USER_CMPLTN_COMMON_TLV_RTS_FAILURE_GET(_var) \
		(((_var) & HTT_PPDU_STATS_USER_CMPLTN_COMMON_TLV_RTS_FAILURE_M) >> \
		HTT_PPDU_STATS_USER_CMPLTN_COMMON_TLV_RTS_FAILURE_S)

		#define HTT_PPDU_STATS_USER_CMPLTN_COMMON_TLV_RTS_FAILURE_SET (_var , _val) \
		do { \
		HTT_CHECK_SET_VAL(HTT_PPDU_STATS_USER_CMPLTN_COMMON_TLV_RTS_FAILURE, _val); \
		((_var) \|= ((_val) << HTT_PPDU_STATS_USER_CMPLTN_COMMON_TLV_RTS_FAILURE_S)); \
		} while (0)

		#define HTT_PPDU_STATS_USER_CMPLTN_COMMON_TLV_CHAIN_RSSI_M 0xffffffff
		#define HTT_PPDU_STATS_USER_CMPLTN_COMMON_TLV_CHAIN_RSSI_S 0

		@@ -1633,16 +1672,23 @@ typedef struct {
		* BIT [ 7 : 4] :- short_retries
		* BIT [ 8 : 8] :- is_ampdu
		* BIT [ 12: 9] :- resp_type
		* BIT [ 31: 13] :- reserved0
		* BIT [ 15: 13] :- medium protection type
		* BIT [ 16: 16] :- rts_success
		* BIT [ 17: 17] :- rts_failure
		* BIT [ 31: 18] :- reserved
		*/
		union {
		A_UINT32 resp_type_is_ampdu__short_retry__long_retry;
		struct {
		A_UINT32 resp_type_is_ampdu__short_retry__long_retry; /* older name */
		A_UINT32 resp_type__is_ampdu__short_retry__long_retry__mprot_type__rts_success__rts_failure; /* newer name */
		struct { /* bitfield names */
		A_UINT32 long_retries: 4,
		short_retries: 4,
		is_ampdu: 1,
		resp_type: 4,
		reserved0: 19;
		mprot_type: 3,
		rts_success: 1,
		rts_failure: 1,
		reserved0: 14;
		};
		};

fw/htt_stats.h

+28 −2

Original line number	Diff line number	Diff line
		@@ -143,6 +143,7 @@ enum htt_dbg_ext_stats_type {
		* 4 bit htt_tx_tid_stats_tlv/htt_tx_tid_stats_v1_tlv
		* 5 bit htt_rx_tid_stats_tlv
		* 6 bit htt_msdu_flow_stats_tlv
		* 7 bit htt_peer_sched_stats_tlv
		* - config_param2: [Bit31 : Bit0] mac_addr31to0
		* - config_param3: [Bit15 : Bit0] mac_addr47to32
		* [Bit 16] If this bit is set, reset per peer stats
		@@ -439,6 +440,7 @@ typedef enum {
		HTT_STATS_RX_PDEV_UL_MIMO_USER_STATS_TAG = 96, /* htt_rx_pdev_ul_mimo_user_stats_tlv */
		HTT_STATS_RX_PDEV_UL_MUMIMO_TRIG_STATS_TAG = 97, /* htt_rx_pdev_ul_mumimo_trig_stats_tlv */
		HTT_STATS_RX_FSE_STATS_TAG = 98, /* htt_rx_fse_stats_tlv */
		HTT_STATS_PEER_SCHED_STATS_TAG = 99, /* htt_peer_sched_stats_tlv */

		HTT_STATS_MAX_TAG,
		} htt_tlv_tag_t;
		@@ -1333,10 +1335,26 @@ typedef enum {
		HTT_TX_TID_STATS_TLV = 4,
		HTT_RX_TID_STATS_TLV = 5,
		HTT_MSDU_FLOW_STATS_TLV = 6,
		HTT_PEER_SCHED_STATS_TLV = 7,

		HTT_PEER_STATS_MAX_TLV = 31,
		} htt_peer_stats_tlv_enum;

		typedef struct {
		htt_tlv_hdr_t tlv_hdr;
		A_UINT32 peer_id;
		/* Num of DL schedules for peer */
		A_UINT32 num_sched_dl;
		/* Num od UL schedules for peer */
		A_UINT32 num_sched_ul;
		/* Peer TX time */
		A_UINT32 peer_tx_active_dur_us_low;
		A_UINT32 peer_tx_active_dur_us_high;
		/* Peer RX time */
		A_UINT32 peer_rx_active_dur_us_low;
		A_UINT32 peer_rx_active_dur_us_high;
		} htt_peer_sched_stats_tlv;

		/* config_param0 */
		#define HTT_DBG_EXT_STATS_PEER_INFO_IS_MAC_ADDR_M 0x00000001
		#define HTT_DBG_EXT_STATS_PEER_INFO_IS_MAC_ADDR_S 0
		@@ -1385,6 +1403,7 @@ typedef enum {
		* - HTT_STATS_RX_TID_DETAILS_TAG (multiple)
		* - HTT_STATS_PEER_MSDU_FLOWQ_TAG (multiple)
		* - HTT_STATS_TX_TID_DETAILS_V1_TAG (multiple)
		* - HTT_STATS_PEER_SCHED_STATS_TAG
		*/
		/* NOTE:
		* This structure is for documentation, and cannot be safely used directly.
		@@ -1401,6 +1420,7 @@ typedef struct _htt_peer_stats {
		htt_rx_tid_stats_tlv rx_tid_stats[1];
		htt_msdu_flow_stats_tlv msdu_flowq[1];
		htt_tx_tid_stats_v1_tlv tx_tid_stats_v1[1];
		htt_peer_sched_stats_tlv peer_sched_stats;
		} htt_peer_stats_t;

		/* =========== ACTIVE PEER LIST ========== */
		@@ -1898,7 +1918,7 @@ typedef struct {
		/* NOTE: Variable length TLV, use length spec to infer array size */
		typedef struct {
		htt_tlv_hdr_t tlv_hdr;
		/* Scheduler command posted per tx_mode su / mu mimo 11ac / mu mimo 11ax / mu ofdma */
		/* Scheduler command posted per tx_mode */
		A_UINT32 sched_cmd_posted[1]; /* HTT_TX_PDEV_SCHED_TX_MODE_MAX */
		} htt_sched_txq_cmd_posted_tlv_v;

		@@ -1907,7 +1927,7 @@ typedef struct {
		/* NOTE: Variable length TLV, use length spec to infer array size */
		typedef struct {
		htt_tlv_hdr_t tlv_hdr;
		/* Scheduler command reaped per tx_mode su / mu mimo 11ac / mu mimo 11ax / mu ofdma */
		/* Scheduler command reaped per tx_mode */
		A_UINT32 sched_cmd_reaped[1]; /* HTT_TX_PDEV_SCHED_TX_MODE_MAX */
		} htt_sched_txq_cmd_reaped_tlv_v;

		@@ -2041,6 +2061,12 @@ typedef struct {
		A_UINT32 su_min_txtime_sched_delay;
		/* scheduled via no delay */
		A_UINT32 su_no_delay;
		/* Num of supercycles for this TxQ */
		A_UINT32 num_supercycles;
		/* Num of subcycles with sort for this TxQ */
		A_UINT32 num_subcycles_with_sort;
		/* Num of subcycles without sort for this Txq */
		A_UINT32 num_subcycles_no_sort;
		} htt_tx_pdev_stats_sched_per_txq_tlv;

		#define HTT_STATS_TX_SCHED_CMN_MAC_ID_M 0x000000ff

fw/wmi_services.h

+25 −0

Original line number	Diff line number	Diff line
		@@ -406,6 +406,16 @@ typedef enum {
		WMI_SERVICE_WPA3_SAE_ROAM_SUPPORT = 221, /* Indicates FW supports WPA3 SAE roaming */
		WMI_SERVICE_WPA3_OWE_ROAM_SUPPORT = 222, /* Indicates FW supports WPA3 OWE roaming */
		WMI_SERVICE_AUDIO_AGGR = 223, /* Indicates FW supports audio frame aggregation */
		WMI_SERVICE_6GHZ_SUPPORT = 224, /* Indicates FW supports 6GHZ (scan, connection and so on) */
		/* WMI_SERVICE_QMI_STATS_SUPPORT
		* Indicates FW supports stat request command WMI_REQUEST_LINK_STATS_CMDID
		* and WMI_REQUEST_STATS_CMDID coming from QMI which will be used in
		* runtime PM suspend.
		*/
		WMI_SERVICE_QMI_STATS_SUPPORT = 225,
		WMI_SERVICE_CFR_CAPTURE_FILTER_SUPPORT = 226, /* Indicate FW Supports Channel Frequency Response (CFR) via WMI_CFR_CAPTURE_FILTER_CMDID */
		WMI_SERVICE_STA_BSS_MAX_IDLE_TIME = 227, /* Indicate FW supports BSS Max Idle time feature via WMI_VDEV_BSS_MAX_IDLE_TIME_CMDID */


		/***** ADD NEW SERVICES HERE *****/

		@@ -416,7 +426,22 @@ typedef enum {
		#define WMI_SERVICE_BM_SIZE ((WMI_MAX_SERVICE + sizeof(A_UINT32)- 1)/sizeof(A_UINT32))

		#define WMI_NUM_EXT_SERVICES (WMI_MAX_EXT_SERVICE - WMI_MAX_SERVICE)

		/*
		* TEMPORARY WORKAROUND
		* Virtually all branches of the target utilize an incorrect check on
		* the value of WMI_SERVICE_EXT_BM_SIZE32, checking that
		* WMI_SERVICE_EXT_BM_SIZE32 < 4, rather than WMI_SERVICE_EXT_BM_SIZE32 <= 4.
		* Until all target branches are fixed, this check is being disabled
		* by artificially setting WMI_SERVICE_EXT_BM_SIZE32 to 0, rather than
		* the number of 4-byte words required for holding the WMI extension
		* service flags.
		*/
		#if 0
		#define WMI_SERVICE_EXT_BM_SIZE32 ((WMI_NUM_EXT_SERVICES + 31) / 32)
		#else
		#define WMI_SERVICE_EXT_BM_SIZE32 0
		#endif

		#define WMI_SERVICE_ROAM_OFFLOAD WMI_SERVICE_ROAM_SCAN_OFFLOAD /* depreciated the name WMI_SERVICE_ROAM_OFFLOAD, but here to help compiling with old host driver */

fw/wmi_tlv_defs.h

+29 −1

File changed.

Preview size limit exceeded, changes collapsed.