Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 6a17e7bb authored by Xiaogang Cui's avatar Xiaogang Cui
Browse files

ARM: dts: msm: Add initial support for msmcobalt QRD VR1 board 



Add initial device trees for msmcobalt QRD VR1 board.

Change-Id: I94ebf6366b75daf9102a50eb86e757139e6d4231
Signed-off-by: default avatarXiaogang Cui <xiaogang@codeaurora.org>
parent ab26d098

arch/arm/boot/dts/qcom/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -113,6 +113,7 @@ dtb-$(CONFIG_ARCH_MSMCOBALT) += msmcobalt-sim.dtb \ 
	msmcobalt-v2-cdp.dtb \

	msmcobalt-v2-qrd.dtb \

	msmcobalt-qrd-skuk.dtb \

	msmcobalt-qrd-vr1.dtb \

	apqcobalt-mtp.dtb \

	apqcobalt-cdp.dtb \

	apqcobalt-v2-mtp.dtb \

arch/arm/boot/dts/qcom/msmcobalt-qrd-vr1.dts

0 → 100644
+23 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2016, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */





/dts-v1/;



#include "msmcobalt.dtsi"

#include "msmcobalt-qrd-vr1.dtsi"



/ {

	model = "Qualcomm Technologies, Inc. MSM COBALT VR1 Board";

	compatible = "qcom,msmcobalt-qrd", "qcom,msmcobalt", "qcom,qrd";

	qcom,board-id = <0x02000b 0x80>;

};

arch/arm/boot/dts/qcom/msmcobalt-qrd-vr1.dtsi

0 → 100644
+102 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2016, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



#include <dt-bindings/interrupt-controller/irq.h>

#include "msmcobalt-pinctrl.dtsi"



&blsp1_uart3_hs {

	status = "ok";

};



&ufsphy1 {

	vdda-phy-supply = <&pmcobalt_l1>;

	vdda-pll-supply = <&pmcobalt_l2>;

	vddp-ref-clk-supply = <&pmcobalt_l26>;

	vdda-phy-max-microamp = <51400>;

	vdda-pll-max-microamp = <14600>;

	vddp-ref-clk-max-microamp = <100>;

	vddp-ref-clk-always-on;

	status = "ok";

};



&ufs1 {

	vdd-hba-supply = <&gdsc_ufs>;

	vdd-hba-fixed-regulator;

	vcc-supply = <&pmcobalt_l20>;

	vccq-supply = <&pmcobalt_l26>;

	vccq2-supply = <&pmcobalt_s4>;

	vcc-max-microamp = <750000>;

	vccq-max-microamp = <560000>;

	vccq2-max-microamp = <750000>;

	status = "ok";

};



&ufs_ice {

	status = "ok";

};



&sdhc_2 {

	vdd-supply = <&pmcobalt_l21>;

	qcom,vdd-voltage-level = <2950000 2960000>;

	qcom,vdd-current-level = <200 800000>;



	vdd-io-supply = <&pmcobalt_l13>;

	qcom,vdd-io-voltage-level = <1808000 2960000>;

	qcom,vdd-io-current-level = <200 22000>;



	pinctrl-names = "active", "sleep";

	pinctrl-0 = <&sdc2_clk_on  &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;

	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;



	qcom,clk-rates = <400000 20000000 25000000

				50000000 100000000 200000000>;

	qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104";



	cd-gpios = <&tlmm 95 0x1>;



	status = "ok";

};



&uartblsp2dm1 {

	status = "ok";

	pinctrl-names = "default";

	pinctrl-0 = <&uart_console_active>;

};



&pmcobalt_gpios {

	/* GPIO 6 for Vol+ Key */

	gpio@c500 {

		status = "okay";

		qcom,mode = <0>;

		qcom,pull = <0>;

		qcom,vin-sel = <0>;

		qcom,src-sel = <0>;

		qcom,out-strength = <1>;

	};

};



&soc {

	gpio_keys {

		compatible = "gpio-keys";

		input-name = "gpio-keys";

		status = "okay";



		vol_up {

			label = "volume_up";

			gpios = <&pmcobalt_gpios 6 0x1>;

			linux,input-type = <1>;

			linux,code = <115>;

			gpio-key,wakeup;

			debounce-interval = <15>;

		};

	};

};