Commit 65485bf0 authored Nov 02, 2016 by Linux Build Service Account

Promotion of kernel.lnx.4.4-161102.

CRs Change ID Subject
--------------------------------------------------------------------------------------------------------------
1068171 Ic0f2a51b5af661fd23576ae5135c920b92f0cdfd dt-bindings: power: reset: add document for reboot-mode
1082552 If27cb2bb3fcaafa5c8435f3c2e0e4be9b8f1e987 sched/hmp: Disable interrupts when resetting all task st
1082652 Ic4791164cee1dea0cc36c8445f546b9ec56785d4 drivers: cpuidle: lpm-levels: Enable Sleep prediction
1068171 Id65f6b9186e7a5209542a380bae31a1d8933b931 power: reset: add reboot mode driver
1070301 I619272c5d0439427061541f5658cfd305a4ebd46 usb: xhci-plat: Enable wakeup for the root hubs
1082708 I0228967ca3b33a56489a80833c0565ba2dfe8c2a msm: ipa3: fix send_cmd_timeout logic
1080024 I00c612be2b8c22dd5afb65a739551df91cb324fc ANDROID: dm verity fec: initialize recursion level
1083755 Iea068907241b42846d95d8e62e59409cdd29ca42 ASoC: wcd9335: Enable standalone ldo_h
1084195 I7c3d321f9f062037d85efba437a3fc1012b64d4b pmic-voter: Add the votable name in debugfs
1077457 If2bb1900c07af1ea162da362c913d4880b0bc755 msm: crypto: Fix integer over flow check in qce driver
1072781 Ie6b5a511f5b3077adae7d464de437f2aa893b0c9 msm: kgsl: Clear the interrupt immediately
1082598 I2a49535786ac61c4da0bebe300aff33a556e485d ARM: dts: msm: fix WLED sink configuration for msmcobalt
1066400 Id08f7b2e109b6b2963b19dfe07f07cbfb424202b spmi-pmic-arb: fix a possible null pointer dereference
1082630 I490b5679de4cb4837f5ed5d4e40d339e12c8ecc9 icnss: Shutdown Adrastea before remapping MSA0
1080024 I7ce9f38d8c7a62361392c5a8ccebb288f8a3a2ea ANDROID: dm: allow adb disable-verity only in userdebug
1082196 I1f53c9536b6896111707b77954d2b6cf4d227db8 usb: dwc3: Turn on memory core and periphery upon resume
1081279 I30cd3fb0435e085e76a60043b80b6ff7aded2819 clk: msm: Add COMMON_CLK branch memory flags
1080024 Id27cf5231aebcdd14f4fb25dd44052f829e0427e Revert "dm-verity: Add a temporary dummy opaque struct d
1080024 Idb88b901e0209c2cccc9c0796689f780592d58f9 ANDROID: dm verity fec: fix RS block calculation
1081637 I0a34f0bbc9f2049b826777a31e14d2cf62cdc211 qseecom: check error return value of ion_map_kernel
1080024 I2d9354e240d36ea06fc68c2d18d8e87b823a4c2f ANDROID: dm: fix signature verification flag
1082349 I0d8e9bdc15d052458e366cef13a6d2d8c7420ff2 arm64: Implement optimised IP checksum helpers
1083795 Ifa59335033f8b9bda6fb0ca4b071387fdaa8f6f9 ASoC: wcd934x: Restore CPR defaults after SSR
1080024 Ib34d25c0854202f3e70df0a6d0ef1d96f0250c8e ANDROID: dm: android-verity: Verify header before fetchi
1049512 Id254a12ba8fc2d57951d158c8fce80168375586d Bluetooth:Add ioctl to power control connectivity chip
1080024 I8f5c2289b842b820ca04f5773525e5449bb3f355 ANDROID: dm: mount as linear target if eng build
1080024 I4a377e417b00afd9ecccdb3e605fea31a7df112e ANDROID: dm: rename dm-linear methods for dm-android-ver
1082804 I7901df15ec03273304c5e4d417f272497ad1523c clk: msm: clock-osm: Request Nominal Fmax frequency afte
1083524 Iabc11506074511ee71463e9d287f6e460dca451e ARM: dts: msm: Add initial support for msmcobalt v2 QRD
1080024 I506c89b053d835ab579e703eef2bc1f8487250de ANDROID: dm: use default verity public key
1083708 Ifdd0089a6a970792ebd84665178bd4de86eae2fb soc: qcom: signal buffer response after glink_rx_done()
1083306 I018729af22dbd787f42fc3788cbff018be7b4014 ARM: dts: msm: correct pmicobalt_bob regulator name for
1068949 Iba43e192905ab37d196aea4b5d00861b9cb7c347 msm: ipa3: Support IPA-USB suspend sequence without remo
1082304 I04008d0bfc9a874e08b45f78a937004e9f37527d usb: pd: Fix sink hard reset looping bug
1080024 Icfdc3e7b3ead5de335a059cade1aca70414db415 ANDROID: dm-android-verity: Rebase on top of 4.1
1080024 Ie04c8cf2dd755f54d02dbdc4e734a13d6f6507b5 ANDROID: dm: android-verity: Remove fec_header location
1080024 I82a911cf963367b1f311c5035bf894a380a76e54 dm-verity: Add a temporary dummy opaque struct declarati
1067432 I2cd3b87aca032d4c5868cc9db35987213349a337 msm: ADSPRPC: Do not pass offset for secure buffers
1080024 I0a7ebff331d259c59a5e03c81918cc1613c3a766 ANDROID: dm verity fec: limit error correction recursion
1081779 I321bd79d04e135030764dcdf83a58fee3c4e72c8 msm: mdss: Add Rec2020 YUV conversion to CSC tables
1082870 Iea0a8cd64fcce14a99b828cadb0f07664ce858f0 usb: pd: Observe PSHardResetTimer for source hard reset
1082940 Idfc139ff63f6268f836694e0680c1e44582dfbb3 ARM: qcom: add board entries for msmtriton
1083675 I0ba41c9564c12b0b2c419222b54fa0e05be93b75 msm: ipa3: wait for uC load before USB disconnect
1056777 Ibee5689216d9115cb4888fb8593734eaef6c7f9f ARM: dts: msm: add support for etm and cpu-cti on msmfal
1080024 I7e99644a0960ac8279f02c0158ed20999510ea97 ANDROID: dm: Add android verity target
1082643 I1aae776d5e6cc8f1cc2af9278c0e3d6ac37804a9 icnss: Enable PMM_TCXO_CLK before switch to cxo
1066017 Ibe0053e8bd4d8219098ba09041d66fcd5b4592fd binder: prevent kptr leak by using %pK format specifier
1080024 Idb84453e70cc11abd5ef3a0adfbb16f8b5feaf07 ANDROID: dm: use name_to_dev_t
1083760 I2d3f3a299939a061a43b4f552aedc7cac897d8b7 smb138x-charger: Fix FCC and FV parameters
1051250 Ia5cc4a6bbf6b6d0d86e13cec7da167f8a49b859d leds: qpnp-wled: Update AMOLED_VOUT programming
1054930 Id9273e546d3565935a7b1150c27993f02c5734e3 wil6210: prevent XTAL off in device bootloader
1080024 Ic64950c3b55f0a6eaa570bcedc2ace83bbf3005e ANDROID: dm-verity: adopt changes made to dm callbacks
1078627 I55bff36d8504f5fd3041f0dad42a077f25976966 power: reset: Do not disable SDI during reset
1080024 Ic0f7c17e4889c5580d70b52d9a709a37165a5747 ANDROID: dm verity fec: add missing release from fec_kty
1044007 Ia706e7184ab31c5e4e3bb2668a1ab7660ca3c6ce Don't show empty tag stats for unprivileged uids
1083199 Ib19d78f0834803c75b255ee3a119e043ffb8a988 ASoC: wcd934x: fix default value for FLL threshold
1081102 I9665dfc1c52d77dc8953042101d726e7f7ba1807 msm: vidc: Add Colorspace in sequence change event
1080024 Ic41ca4b8908fb2777263799cf3a3e25934d70f18 ANDROID: dm: Mounting root as linear device when verity
1075843 Ibc69706ae1dc878de5cbdaf283f0d71aff8000a1 leds: qpnp-wled: add support for configuring ILIM in pmi
1080024 Iceca2eb6daa55f0acb936eafe1d59f65f7cfcd55 init: do_mounts: Add a dummy definition for dm_table_put
1080024 I157170eebe3c0f89a68ae05870a1060f188d0da0 ANDROID: dm: Minor cleanup
1025311 Ic4c7f66e84c8898d9db630d373b8a3cc8472e826 cfg80211: pass struct to interface combination check/ite
1083198 Ibbca465192c58deba3618d70e36089119c7f3994 ASoC: wcd934x: Add impedance detection controls

Change-Id: Id0fc440d2bfff0c915eaf17a6dd1335053a7d24f
CRs-Fixed: 1083708, 1044007, 1083198, 1083199, 1083760, 1049512, 1082349, 1082304, 1070301, 1066017, 1081637, 1068949, 1082552, 1082870, 1083795, 1025311, 1082630, 1077457, 1080024, 1083524, 1066400, 1082196, 1081102, 1075843, 1083755, 1072781, 1083306, 1082652, 1084195, 1083675, 1051250, 1082940, 1054930, 1056777, 1081779, 1082598, 1082804, 1068171, 1067432, 1082643, 1078627, 1082708, 1081279

parents 4c3ff384 b67bb93f

Documentation/devicetree/bindings/leds/leds-qpnp-wled.txt

+16 −5

Original line number	Diff line number	Diff line
		@@ -33,7 +33,15 @@ Optional properties for WLED:
		- 31100, 29600, 19600, 18100 for pmicobalt/pm2falcon.
		Should only be used if qcom,disp-type-amoled is not
		specified.
		- qcom,ilim-ma : maximum current limiter in ma. default is 980.
		- qcom,ilim-ma : Current limit threshold in mA.
		For pmi8994/8952/8996, default value for LCD is 980mA
		and AMOLED is 385mA.
		Supported values are:
		- 105, 385, 660, 980, 1150, 1420, 1700, 1980.
		For pmicobalt/pm2falcon, default value for LCD is
		970mA and AMOLED is 620mA.
		Supported values are:
		- 105, 280, 450, 620, 970, 1150, 1300, 1500.
		- qcom,boost-duty-ns : maximum boost duty cycle in ns. default is 104.
		- qcom,mod-freq-khz : modulation frequency in khz. default is 9600.
		- qcom,dim-mode : dimming mode. supporting dimming modes are "analog",
		@@ -61,10 +69,13 @@ Optional properties if 'qcom,disp-type-amoled' is mentioned in DT:
		- qcom,loop-ea-gm : control the gm for gm stage in control loop. default is 3.
		- qcom,loop-comp-res-kohm : control to select the compensation resistor in kohm. default is 320.
		- qcom,vref-psm-mv : reference psm voltage in mv. default for amoled is 450.
		- qcom,avdd-target-voltage-mv: The target voltage desired for the AVDD module in mV.
		The supported values are:
		7900, 7600, 7300, 6400, 6100, 5800.
		If not specified, default value used is 7600.
		- qcom,avdd-mode-spmi: Boolean property to enable AMOLED_VOUT programming via SPMI. If not specified,
		AMOLED_VOUT is programmed via S-wire. This can be specified only for newer
		PMICs like pmicobalt/pm2falcon.
		- qcom,avdd-target-voltage-mv: The voltage required for AMOLED_VOUT. Accepted values are in the range
		of 5650 to 7900 in steps of 150. Default value is 7600. Unit is in mV.
		For old revisions, accepted values are: 7900, 7600, 7300, 6400, 6100,
		5800.

		Example:
		qcom,leds@d800 {

Documentation/devicetree/bindings/power/reset/reboot-mode.txt

0 → 100644

+25 −0

Original line number	Diff line number	Diff line
		Generic reboot mode core map driver

		This driver get reboot mode arguments and call the write
		interface to store the magic value in special register
		or ram. Then the bootloader can read it and take different
		action according to the argument stored.

		All mode properties are vendor specific, it is a indication to tell
		the bootloader what to do when the system reboots, and should be named
		as mode-xxx = <magic> (xxx is mode name, magic should be a none-zero value).

		For example modes common on Android platform:
		- mode-normal: Normal reboot mode, system reboot with command "reboot".
		- mode-recovery: Android Recovery mode, it is a mode to format the device or update a new image.
		- mode-bootloader: Android fastboot mode, it's a mode to re-flash partitions on the Android based device.
		- mode-loader: A bootloader mode, it's a mode used to download image on Rockchip platform,
		usually used in development.

		Example:
		reboot-mode {
		mode-normal = <BOOT_NORMAL>;
		mode-recovery = <BOOT_RECOVERY>;
		mode-bootloader = <BOOT_FASTBOOT>;
		mode-loader = <BOOT_BL_DOWNLOAD>;
		}

Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.txt

0 → 100644

+35 −0

Original line number	Diff line number	Diff line
		SYSCON reboot mode driver

		This driver gets reboot mode magic value form reboot-mode driver
		and stores it in a SYSCON mapped register. Then the bootloader
		can read it and take different action according to the magic
		value stored.

		This DT node should be represented as a sub-node of a "syscon", "simple-mfd"
		node.

		Required properties:
		- compatible: should be "syscon-reboot-mode"
		- offset: offset in the register map for the storage register (in bytes)

		Optional property:
		- mask: bits mask of the bits in the register to store the reboot mode magic value,
		default set to 0xffffffff if missing.

		The rest of the properties should follow the generic reboot-mode description
		found in reboot-mode.txt

		Example:
		pmu: pmu@20004000 {
		compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd";
		reg = <0x20004000 0x100>;

		reboot-mode {
		compatible = "syscon-reboot-mode";
		offset = <0x40>;
		mode-normal = <BOOT_NORMAL>;
		mode-recovery = <BOOT_RECOVERY>;
		mode-bootloader = <BOOT_FASTBOOT>;
		mode-loader = <BOOT_BL_DOWNLOAD>;
		};
		};

arch/arm/boot/dts/qcom/Makefile

+1 −0

Original line number	Diff line number	Diff line
		@@ -114,6 +114,7 @@ dtb-$(CONFIG_ARCH_MSMCOBALT) += msmcobalt-sim.dtb \
		msmcobalt-v2-qrd.dtb \
		msmcobalt-qrd-skuk.dtb \
		msmcobalt-qrd-vr1.dtb \
		msmcobalt-v2-qrd-vr1.dtb \
		apqcobalt-mtp.dtb \
		apqcobalt-cdp.dtb \
		apqcobalt-v2-mtp.dtb \

arch/arm/boot/dts/qcom/msm-pm2falcon.dtsi

+1 −1

Original line number	Diff line number	Diff line
		@@ -237,7 +237,7 @@
		qcom,vref-mv = <350>;
		qcom,switch-freq-khz = <800>;
		qcom,ovp-mv = <29600>;
		qcom,ilim-ma = <980>;
		qcom,ilim-ma = <970>;
		qcom,boost-duty-ns = <26>;
		qcom,mod-freq-khz = <9600>;
		qcom,dim-mode = "hybrid";