Current ATH10k driver snapshot is very old, up merge ATH10k project to enable WCN3990 chipset in msm4.4 tree. * remotes/origin/tmp-896bb812: ath10k: cache calibration data when the core is stopped ath10k: Ignore SWBA event for a vif if its marked for no beacon ath10k: fix error return code in ahb ath10k: support up to 64 vdevs ath10k: document cycle count related counters ath10k: fix typo in logging message ath10k: fix rfc1042 header retrieval in QCA4019 with eth decap mode ath10k: do not check if reset is NULL ath10k: use devm_reset_control_get() instead of reset_control_get() ath10k: use devm_clk_get() instead of clk_get() ath10k: spelling and miscellaneous neatening ath10k: remove 4-addr padding related hw_param configuration ath10k: properly remove padding from the start of rx payload ath10k: add provision for Rx descriptor abstraction ath10k: move ath10k_hw_params definition to hw.h ath10k: improve logging message ath10k: enable peer stats by default ath10k: remove unused variable ar_pci ath10k: fix memory leak on caldata on error exit path ath10k: fix reporting channel survey data ath10k: remove unnecessary error code assignment ath10k: fix throughput regression in multi client mode ath10k: implement NAPI support ath10k: fix spelling mistake "montior" -> "monitor" ath10k: Fix broken NULL func data frame status for 10.4 ath10k: replace config_enabled() with IS_REACHABLE() ath10k: Added support for extended dbglog module id for 10.4 ath10k: use complete() instead complete_all() ath10k: fix sending frame in management path in push txq logic ath10k: improve wake_tx_queue ops performance ath10k: suppress warnings when getting wmi WDS peer event id ath10k: fix group privacy action frame decryption for qca4019 ath10k: hide kernel addresses from logs using %pK format specifier ath10k: Add WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT wmi service ath10k: fix spurious tx/rx during boot ath10k: add wmi command barrier utility ath10k: implement wmi echo event ath10k: implement wmi echo command ath10k: add testmode support for 10.4 firmware ath10k: handle testmode events for 10.2 and 10.4 based firmware ath10k: move firmware_swap_code_seg_info to ath10k_fw_file ath10k: Remove driver log suggesting QCA9887 support is experimental ath10k: fix get rx_status from htt context tree-wide: replace config_enabled() with IS_ENABLED() ath10k: disable wake_tx_queue for older devices ath10k: fix possible wrong rx_busy time reporting in QCA4019 ath10k: replace warning with an error message if HTT op version is unset ath10k: enable support for QCA9888 ath10k: remove unused member in ath10k_hw_regs ath10k: Clean up peer when sta goes away. ath10k: Add WARN_ON if we over-write peer-map pointer. ath10k: remove extra space on ath10k_update_channel_list ath10k: simplify pktlog htt event processing ath10k: remove unused <linux/semaphore.h> ath10k: ensure peer_map references are cleaned up ath10k: ensure txrx-compl-task is stopped when cleaning htt-tx ath10k: remove debugfs support for Per STA total rx duration ath10k: add support for ath10k_sta_statistics support ath10k: fix 10.4 extended peer stats update mac80211: Add support for beacon report radio measurement ath10k: fix some typo in spectral code commments ath10k: disable TX_STBC for tx chainmask of 1 ath10k: enable beacon loss detection support for 10.4 ath10k: fix potential null dereference bugs ath10k: remove unneccessary WARN_ON_ONCE in rx during ACS ath10k: fix crash during card removal ath10k: fix deadlock while processing rx_in_ord_ind ath10k: fix cycle counter wraparound handling for QCA4019 ath10k: define an enum to enable cycle counter wraparound logic ath10k: fix CCK h/w rates for QCA99X0 and newer chipsets ath10k: remove duplicate and unused rx rate flags ath10k: fix some of the macro definitions of HTT_RX_IND message ath10k: fix crash related to printing features ath10k: add board data download from target ath10k: add QCA9887 chipset support ath10k: fix deadlock when peer cannot be created ath10k: enable ipq4019 device probe in ahb module ath10k: add pdev param support to enable/disable btcoex ath10k: add new ATH10K_FW_FEATURE_BTCOEX_PARAM ath10k: update module description ath10k: remove unused phy_mode_to_band ath10k: fix operating irq mode for ahb device ath10k: fix error while writing 'simulate_fw_crash' debugfs ath10k: fix diag_read to collect data for larger memory ath10k: fix legacy rate packet debug messages ath10k: reduce warning messages during rx without proper channel context ath10k: improve tx scheduling ath10k: enable support for QCA9984 ath10k: define rx_ppdu_end for QCA9984 ath10k: clean up growing hw checks during safe and full reset ath10k: move rx_location_info out of struct rx_pkt_end ath10k: Fix survey reporting with QCA4019 ath10k: suppress warnings when getting wmi peer_rate_code_list event ath10k: release pre_cal_file while unloading driver ath10k: update bss channel survey information ath10k: handle pdev_chan_info wmi event ath10k: implement wmi_pdev_bss_chan_info_request ath10k: add pdev bss channel info wmi definitions ath10k: move spectral related structures under ath10k debugfs ath10k: remove VHT capabilities from 2.4GHz ath10k: fix a typo in ath10k_start() ath10k: add max_tx_power for QCA6174 WLAN.RM.2.0 firmware ath10k: remove enum ath10k_swap_code_seg_bin_type ath10k: switch testmode to use ath10k_core_fetch_firmware_api_n() ath10k: move htt_op_version to struct ath10k_fw_file ath10k: move wmi_op_version to struct ath10k_fw_file ath10k: move fw_features to struct ath10k_fw_file ath10k: move fw_version inside struct ath10k_fw_file ath10k: refactor firmware images to struct ath10k_fw_components ath10k: remove deprecated firmware API 1 support ath10k: add dynamic tx mode switch config support for qca4019 ath10k: add some sanity checks to peer_map_event() functions ath10k: fix return value for btcoex and peer stats debugfs ath10k: fix parenthesis alignment ath10k: prefer ether_addr_copy() over memcpy() ath10k: prefer ether_addr_equal() or ether_addr_equal_unaligned() over memcmp() ath10k: prefer kernel type 'u64' over 'u_int64_t' ath10k: fix checkpatch warnings related to spaces ath10k: remove MSI range support ath10k: enable set_tsf vdev command to WMI 10.4 ath10k: update 10.4 WMI vdev parameters ath10k: add a support of set_tsf on vdev interface ath10k: Document alloc_frag_desc_for_data_pkt config option. cfg80211: remove enum ieee80211_band ath10k: fix unconditional num_mpdus_ready subtraction ath10k: remove unnecessary warning for probe response drops ath10k: fix calibration init sequence of qca99x0 mac80211: allow not sending MIC up from driver for HW crypto ath10k: parse Rx MAC timestamp in mgmt frame for FW 10.4 ath10k: combine txrx and replenish task ath10k: reuse copy engine 5 (htt rx) descriptors ath10k: cleanup copy engine receive next completion ath10k: register ath10k_htt_htc_t2h_msg_handler ath10k: speedup htt rx descriptor processing for rx_ind ath10k: cleanup amsdu processing for rx indication ath10k: remove unused fw_desc processing ath10k: copy tx fetch indication message ath10k: speedup htt rx descriptor processing for tx completion ath10k: enable parsing per station rx duration for 10.4 ath10k: introduce Extended Resource Config support for 10.4 ath10k: enable debugfs provision to enable Peer Stats feature ath10k: incorporate qca4019 cal data download sequence ath10k: move cal data len to hw_params ath10k: pass cal data location as an argument to ath10k_download_cal_{file|dt} ath10k: fix null deref if device crashes early ath10k: fix pull-push tx threshold handling ath10k: fix tx hang ath10k: advertise force AP scan feature ath10k: free cached fw bin contents when get board id fails ath10k: move mgmt descriptor limit handle under mgmt_tx ath10k: handle channel change htt event ath10k: set MAC timestamp in management Rx frame ath10k: deliver mgmt frames from htt to monitor vifs only ath10k: change htt tx desc/qcache peer limit config ath10k: fix HTT Tx CE ring size ath10k: implement push-pull tx ath10k: keep track of queue depth per txq ath10k: store txq in skb_cb ath10k: implement updating shared htt txq state ath10k: implement wake_tx_queue ath10k: add new htt message generation/parsing logic ath10k: add fast peer_map lookup ath10k: maintain peer_id for each sta and vif ath10k: refactor tx pending management ath10k: unify txpath decision ath10k: refactor tx code ath10k: fix sanity check on enabling btcoex via debugfs ath10k: reduce number of peers to support peer stats feature ath10k: process htt rx indication as batch mode ath10k: reduce rx_lock contention for htt rx indication ath10k: fix erroneous return value ath10k: add hw_rev to trace events to support pktlog ath10k: fix pktlog in QCA99X0 ath10k: fix pointless update of peer stats list ath10k: fix updating peer stats rx duration ath10k: remove impossible code ath10k: populate qca4019 fw specific wmi init params ath10k: add qca4019 hw params ath10k: add abstraction layer for vdev subtype ath10k: use vif->type and vif->p2p for P2P_GO check ath10k: update 10.4 WMI service map ath10k: rename Mesh related service names ath10k: expose hif ops for ahb ath10k: add resource init and deinit in ahb ath10k: include irq related functions in ahb ath10k: add chip and bus halt logic in ahb ath10k: add reset ctrl related functions in ahb ath10k: add clock ctrl related functions in ahb ath10k: add helper functions in ahb.c for reg rd/wr ath10k: include qca4019 register map table ath10k: add basic skeleton to support ahb ath10k: pull reusable code from pci probe and remove for ahb ath10k: make ath10k_pci_read32/write32() ops more generic ath10k: make some of ath10k_pci_* func reusable ath10k: implement basic support for new tx path firmware ath10k: clean up cont frag desc init code ath10k: add new FW_FEATURE_PEER_FLOW_CONTROL ath10k: add new htt definitions ath10k: rename some HTT events ath10k: remove the p2p notice of absence info from 10.2.4 FW beacon info ath10k: add debugfs support for Per STA total rx duration ath10k: enable periodic peer stats update ath10k: provision to support periodic peer stats update ath10k: rename few function names of firmware stats ath10k: cleanup setting pdev paramaters ath10k: fix naming Peer stats rssi_changed field in 10.2.4 ath10k: add support for parsing per STA rx_duration for 10.2.4 ath10k: prevent txrx running for too long mac80211: pass block ack session timeout to to driver ath10k: set SM power save disabled to default value ath10k: reduce indentation by moving powersave check within function ath10k: wake up device before accessing registers ath10k: allow Mesh Point to install peer security key ath10k: do not use coherent memory for allocated device memory chunks ath10k: remove unnecessary amsdu/ampdu assignment in debugfs ath10k: implement fw_checksums debugfs file ath10k: print crc32 checksums for firmware and board files ath10k: split driver info messages during device initialisation ath10k: always show bmi chip ids and subdevice ids ath10k: reorganise hardware and firmware info messages ath10k: fix otp board id error message ath10k: apply Mesh subtype when Mesh interface created. ath10k: introduce new subtypes for proxy STA and Mesh ath10k: update WMI 10.x service map ath10k: Fix write permission on few debugfs files ath10k: stop abusing GFP_DMA ath10k: Enable AP + STA interface combination support for 10.x ath10k: fix board data fetch error message ath10k: Fix build with CONFIG_THERMAL=m ath10k: store msdu_id instead of txbuf pointers ath10k: replace vdev_id and tid in skb cb ath10k: fix tx header parsing ath10k: pack up flags in skb_cb ath10k: remove freq from skb_cb ath10k: remove is_offchan ath10k: remove txmode from skb_cb ath10k: rename function to adhere to naming convention ath10k: merge is_protected with nohwcrypt ath10k: adjust the RX packet pad offset at QCA99X0 4addr mode ath10k: fix the wrong RX rate idx report at 11G mode ath10k: fix peerid configuration in htt tx desc for htt version < 3.4 ath10k: rename the helper which is used for off-channel tx ath10k: fix peer assoc complete WMI command for 10.4 ath10k: add support for pktlog in QCA99X0 ath10k: debugfs file to enable Bluetooth coexistence feature ath10k: add new pdev params defines to 10.4 ath10k: add new WMI cmd/event defines for 10.4 ath10k: add new service defines for 10.4 ath10k: add thermal throttling support for 10.4 firmware ath10k: set peer MFP flag in peer assoc command ath10k: add abstraction layer for peer flags ath10k: consolidate if statements in ath10k_wmi_event_mgmt_rx Change-Id: I22c4c7c5791079b17545ef7457c54bb60fcfca80 Signed-off-by:Govind Singh <govinds@codeaurora.org>
File added.
Preview size limit exceeded, changes collapsed.
File added.
Preview size limit exceeded, changes collapsed.
