Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 606a083b authored by Florian Fainelli's avatar Florian Fainelli Committed by Ralf Baechle
Browse files

MIPS: RB532: Cleanup the headers again



This patch cleans up headers and regroups informations to
where they should reside. While moving, try to have a
consistant naming for defines.

Signed-off-by: default avatarFlorian Fainelli <florian@openwrt.org>
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent deeb45ac
Loading
Loading
Loading
Loading
+1 −1
Original line number Diff line number Diff line
@@ -45,7 +45,7 @@
#include <asm/mipsregs.h>
#include <asm/system.h>

#include <asm/mach-rc32434/rc32434.h>
#include <asm/mach-rc32434/irq.h>

struct intr_group {
	u32 mask;	/* mask of valid bits in pending/mask registers */
+3 −3
Original line number Diff line number Diff line
@@ -31,16 +31,16 @@
#include <linux/serial_8250.h>

#include <asm/serial.h>
#include <asm/mach-rc32434/rc32434.h>
#include <asm/mach-rc32434/rb.h>

extern unsigned int idt_cpu_freq;

static struct uart_port rb532_uart = {
	.type = PORT_16550A,
	.line = 0,
	.irq = RC32434_UART0_IRQ,
	.irq = UART0_IRQ,
	.iotype = UPIO_MEM,
	.membase = (char *)KSEG1ADDR(RC32434_UART0_BASE),
	.membase = (char *)KSEG1ADDR(REGBASE + UART0BASE),
	.regshift = 2
};

+2 −2
Original line number Diff line number Diff line
@@ -9,7 +9,7 @@
#include <asm/time.h>
#include <linux/ioport.h>

#include <asm/mach-rc32434/rc32434.h>
#include <asm/mach-rc32434/rb.h>
#include <asm/mach-rc32434/pci.h>

struct pci_reg __iomem *pci_reg;
@@ -27,7 +27,7 @@ static struct resource pci0_res[] = {
static void rb_machine_restart(char *command)
{
	/* just jump to the reset vector */
	writel(0x80000001, (void *)KSEG1ADDR(RC32434_REG_BASE + RC32434_RST));
	writel(0x80000001, IDT434_REG_BASE + RST);
	((void (*)(void)) KSEG1ADDR(0x1FC00000u))();
}

+20 −0
Original line number Diff line number Diff line
@@ -4,6 +4,26 @@
#define NR_IRQS	256

#include <asm/mach-generic/irq.h>
#include <asm/mach-rc32434/rb.h>

/* Interrupt Controller */
#define IC_GROUP0_PEND		(REGBASE + 0x38000)
#define IC_GROUP0_MASK		(REGBASE + 0x38008)
#define IC_GROUP_OFFSET		0x0C

#define NUM_INTR_GROUPS		5

/* 16550 UARTs */
#define GROUP0_IRQ_BASE		8	/* GRP2 IRQ numbers start here */
					/* GRP3 IRQ numbers start here */
#define GROUP1_IRQ_BASE		(GROUP0_IRQ_BASE + 32)
					/* GRP4 IRQ numbers start here */
#define GROUP2_IRQ_BASE		(GROUP1_IRQ_BASE + 32)
					/* GRP5 IRQ numbers start here */
#define GROUP3_IRQ_BASE		(GROUP2_IRQ_BASE + 32)
#define GROUP4_IRQ_BASE		(GROUP3_IRQ_BASE + 32)

#define UART0_IRQ		(GROUP3_IRQ_BASE + 0)

#define ETH0_DMA_RX_IRQ   	(GROUP1_IRQ_BASE + 0)
#define ETH0_DMA_TX_IRQ   	(GROUP1_IRQ_BASE + 1)
+2 −0
Original line number Diff line number Diff line
@@ -19,6 +19,8 @@

#define REGBASE		0x18000000
#define IDT434_REG_BASE	((volatile void *) KSEG1ADDR(REGBASE))
#define UART0BASE	0x58000
#define RST		(1 << 15)
#define DEV0BASE	0x010000
#define DEV0MASK	0x010004
#define DEV0C		0x010008
Loading