[ARM] 4300/1: Add picotux 200 ARM board (5d01f133) · Commits · e / devices / android_kernel_sony_msm8998

arch/arm/boot/compressed/head-at91rm9200.S

+6 −0

Original line number	Diff line number	Diff line
		@@ -61,6 +61,12 @@
		cmp r7, r3
		beq 99f

		@ picotux 200 : 963
		mov r3, #(MACH_TYPE_PICOTUX2XX & 0xff)
		orr r3, r3, #(MACH_TYPE_PICOTUX2XX & 0xff00)
		cmp r7, r3
		beq 99f

		@ Ajeco 1ARM : 1075
		mov r3, #(MACH_TYPE_ONEARM & 0xff)
		orr r3, r3, #(MACH_TYPE_ONEARM & 0xff00)

arch/arm/configs/picotux200_defconfig

0 → 100644

+1386 −0

File added.

Preview size limit exceeded, changes collapsed.

arch/arm/mach-at91/Kconfig

+7 −0

Original line number	Diff line number	Diff line
		@@ -81,6 +81,13 @@ config MACH_KB9200
		Select this if you are using KwikByte's KB920x board.
		<http://kwikbyte.com/KB9202_description_new.htm>

		config MACH_PICOTUX2XX
		bool "picotux 200"
		depends on ARCH_AT91RM9200
		help
		Select this if you are using a picotux 200.
		<http://www.picotux.com/>

		config MACH_KAFA
		bool "Sperry-Sun KAFA board"
		depends on ARCH_AT91RM9200

arch/arm/mach-at91/Makefile

+1 −0

Original line number	Diff line number	Diff line
		@@ -25,6 +25,7 @@ obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o
		obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
		obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
		obj-$(CONFIG_MACH_KAFA) += board-kafa.o
		obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o

		# AT91SAM9260 board-specific support
		obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o

arch/arm/mach-at91/board-picotux200.c

0 → 100644

+166 −0

Original line number	Diff line number	Diff line
		/*
		* linux/arch/arm/mach-at91/board-picotux200.c
		*
		* Copyright (C) 2005 SAN People
		* Copyright (C) 2007 Kleinhenz Elektronik GmbH
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License as published by
		* the Free Software Foundation; either version 2 of the License, or
		* (at your option) any later version.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*
		* You should have received a copy of the GNU General Public License
		* along with this program; if not, write to the Free Software
		* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
		*/

		#include <linux/types.h>
		#include <linux/init.h>
		#include <linux/mm.h>
		#include <linux/module.h>
		#include <linux/platform_device.h>
		#include <linux/spi/spi.h>
		#include <linux/mtd/physmap.h>

		#include <asm/hardware.h>
		#include <asm/setup.h>
		#include <asm/mach-types.h>
		#include <asm/irq.h>

		#include <asm/mach/arch.h>
		#include <asm/mach/map.h>
		#include <asm/mach/irq.h>

		#include <asm/arch/board.h>
		#include <asm/arch/gpio.h>
		#include <asm/arch/at91rm9200_mc.h>

		#include "generic.h"


		/*
		* Serial port configuration.
		* 0 .. 3 = USART0 .. USART3
		* 4 = DBGU
		*/
		static struct at91_uart_config __initdata picotux200_uart_config = {
		.console_tty = 0, /* ttyS0 */
		.nr_tty = 2,
		.tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
		};

		static void __init picotux200_map_io(void)
		{
		/* Initialize processor: 18.432 MHz crystal */
		at91rm9200_initialize(18432000, AT91RM9200_BGA);

		/* Setup the serial ports and console */
		at91_init_serial(&picotux200_uart_config);
		}

		static void __init picotux200_init_irq(void)
		{
		at91rm9200_init_interrupts(NULL);
		}

		static struct at91_eth_data __initdata picotux200_eth_data = {
		.phy_irq_pin = AT91_PIN_PC4,
		.is_rmii = 1,
		};

		static struct at91_usbh_data __initdata picotux200_usbh_data = {
		.ports = 1,
		};

		// static struct at91_udc_data __initdata picotux200_udc_data = {
		// .vbus_pin = AT91_PIN_PD4,
		// .pullup_pin = AT91_PIN_PD5,
		// };

		static struct at91_mmc_data __initdata picotux200_mmc_data = {
		.det_pin = AT91_PIN_PB27,
		.slot_b = 0,
		.wire4 = 1,
		.wp_pin = AT91_PIN_PA17,
		};

		// static struct spi_board_info picotux200_spi_devices[] = {
		// { /* DataFlash chip */
		// .modalias = "mtd_dataflash",
		// .chip_select = 0,
		// .max_speed_hz = 15 * 1000 * 1000,
		// },
		// #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
		// { /* DataFlash card */
		// .modalias = "mtd_dataflash",
		// .chip_select = 3,
		// .max_speed_hz = 15 * 1000 * 1000,
		// },
		// #endif
		// };

		#define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0
		#define PICOTUX200_FLASH_SIZE 0x400000

		static struct physmap_flash_data picotux200_flash_data = {
		.width = 2,
		};

		static struct resource picotux200_flash_resource = {
		.start = PICOTUX200_FLASH_BASE,
		.end = PICOTUX200_FLASH_BASE + PICOTUX200_FLASH_SIZE - 1,
		.flags = IORESOURCE_MEM,
		};

		static struct platform_device picotux200_flash = {
		.name = "physmap-flash",
		.id = 0,
		.dev = {
		.platform_data = &picotux200_flash_data,
		},
		.resource = &picotux200_flash_resource,
		.num_resources = 1,
		};

		static void __init picotux200_board_init(void)
		{
		/* Serial */
		at91_add_device_serial();
		/* Ethernet */
		at91_add_device_eth(&picotux200_eth_data);
		/* USB Host */
		at91_add_device_usbh(&picotux200_usbh_data);
		/* USB Device */
		// at91_add_device_udc(&picotux200_udc_data);
		// at91_set_multi_drive(picotux200_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
		/* I2C */
		at91_add_device_i2c();
		/* SPI */
		// at91_add_device_spi(picotux200_spi_devices, ARRAY_SIZE(picotux200_spi_devices));
		#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
		/* DataFlash card */
		at91_set_gpio_output(AT91_PIN_PB22, 0);
		#else
		/* MMC */
		at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
		at91_add_device_mmc(0, &picotux200_mmc_data);
		#endif
		/* NOR Flash */
		platform_device_register(&picotux200_flash);
		}

		MACHINE_START(PICOTUX2XX, "picotux 200")
		/* Maintainer: Kleinhenz Elektronik GmbH */
		.phys_io = AT91_BASE_SYS,
		.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
		.boot_params = AT91_SDRAM_BASE + 0x100,
		.timer = &at91rm9200_timer,
		.map_io = picotux200_map_io,
		.init_irq = picotux200_init_irq,
		.init_machine = picotux200_board_init,
		MACHINE_END