Merge "ARM: dts: msm: enable display for SDM630 PM660A QRD" (4b62ecc6) · Commits · e / devices / android_kernel_sony_msm8998

arch/arm/boot/dts/qcom/sdm630-mdss-panels.dtsi

+62 −0

Original line number	Diff line number	Diff line
		@@ -15,6 +15,7 @@
		#include "dsi-panel-nt35695b-truly-fhd-cmd.dtsi"
		#include "dsi-panel-truly-1080p-cmd.dtsi"
		#include "dsi-panel-truly-1080p-video.dtsi"
		#include "dsi-panel-rm67195-amoled-fhd-cmd.dtsi"

		&soc {
		dsi_panel_pwr_supply: dsi_panel_pwr_supply {
		@@ -49,6 +50,57 @@
		qcom,supply-post-on-sleep = <10>;
		};
		};

		dsi_panel_pwr_supply_labibb_amoled:
		dsi_panel_pwr_supply_labibb_amoled {
		#address-cells = <1>;
		#size-cells = <0>;

		qcom,panel-supply-entry@0 {
		reg = <0>;
		qcom,supply-name = "wqhd-vddio";
		qcom,supply-min-voltage = <1880000>;
		qcom,supply-max-voltage = <1950000>;
		qcom,supply-enable-load = <32000>;
		qcom,supply-disable-load = <80>;
		};

		qcom,panel-supply-entry@1 {
		reg = <1>;
		qcom,supply-name = "vdda-3p3";
		qcom,supply-min-voltage = <3300000>;
		qcom,supply-max-voltage = <3300000>;
		qcom,supply-enable-load = <13200>;
		qcom,supply-disable-load = <80>;
		};

		qcom,panel-supply-entry@2 {
		reg = <2>;
		qcom,supply-name = "lab";
		qcom,supply-min-voltage = <4600000>;
		qcom,supply-max-voltage = <6100000>;
		qcom,supply-enable-load = <100000>;
		qcom,supply-disable-load = <100>;
		};

		qcom,panel-supply-entry@3 {
		reg = <3>;
		qcom,supply-name = "ibb";
		qcom,supply-min-voltage = <4000000>;
		qcom,supply-max-voltage = <6300000>;
		qcom,supply-enable-load = <100000>;
		qcom,supply-disable-load = <100>;
		};

		qcom,panel-supply-entry@4 {
		reg = <4>;
		qcom,supply-name = "oledb";
		qcom,supply-min-voltage = <5000000>;
		qcom,supply-max-voltage = <8100000>;
		qcom,supply-enable-load = <100000>;
		qcom,supply-disable-load = <100>;
		};
		};
		};

		&dsi_nt35695b_truly_fhd_video {
		@@ -98,3 +150,13 @@
		qcom,esd-check-enabled;
		qcom,mdss-dsi-panel-status-check-mode = "bta_check";
		};

		&dsi_rm67195_amoled_fhd_cmd {
		qcom,mdss-dsi-panel-timings-phy-v2 = [23 1e 07 08 05 03 04 a0
		23 1e 07 08 05 03 04 a0
		23 1e 07 08 05 03 04 a0
		23 1e 07 08 05 03 04 a0
		23 19 07 08 05 03 04 a0];
		qcom,mdss-dsi-t-clk-post = <0x0d>;
		qcom,mdss-dsi-t-clk-pre = <0x2d>;
		};

arch/arm/boot/dts/qcom/sdm630-mdss.dtsi

+1 −0

Original line number	Diff line number	Diff line
		@@ -347,6 +347,7 @@

		qcom,timing-db-mode;
		wqhd-vddio-supply = <&pm660_l11>;
		vdda-3p3-supply = <&pm660l_l6>;
		lab-supply = <&lcdb_ldo_vreg>;
		ibb-supply = <&lcdb_ncp_vreg>;
		qcom,mdss-mdp = <&mdss_mdp>;

arch/arm/boot/dts/qcom/sdm630-pm660a-qrd.dts

+32 −0

Original line number	Diff line number	Diff line
		@@ -51,3 +51,35 @@
		qcom,wsa-devs = <&wsa881x_211_en>, <&wsa881x_213_en>;
		qcom,wsa-aux-dev-prefix = "SpkrLeft", "SpkrLeft";
		};

		&pm660a_oledb {
		status = "okay";
		qcom,oledb-default-voltage-mv = <6400>;
		};

		&mdss_mdp {
		qcom,mdss-pref-prim-intf = "dsi";
		};

		&mdss_dsi {
		hw-config = "single_dsi";
		};

		&mdss_dsi0 {
		qcom,dsi-pref-prim-pan = <&dsi_rm67195_amoled_fhd_cmd>;
		pinctrl-names = "mdss_default", "mdss_sleep";
		pinctrl-0 = <&mdss_dsi_active &mdss_te_active>;
		pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>;
		oledb-supply = <&pm660a_oledb>;
		lab-supply = <&lab_regulator>;
		ibb-supply = <&ibb_regulator>;
		qcom,platform-reset-gpio = <&tlmm 53 0>;
		qcom,platform-te-gpio = <&tlmm 59 0>;
		};

		&dsi_rm67195_amoled_fhd_cmd {
		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
		qcom,mdss-dsi-bl-min-level = <1>;
		qcom,mdss-dsi-bl-max-level = <255>;
		qcom,panel-supply-entries = <&dsi_panel_pwr_supply_labibb_amoled>;
		};