sh: mach-snapgear: Rip out superfluous PIO routines. (39c11984) · Commits · e / devices / android_kernel_sony_msm8998

arch/sh/boards/mach-snapgear/Makefile

+1 −1

Original line number	Diff line number	Diff line
		@@ -2,4 +2,4 @@
		# Makefile for the SnapGear specific parts of the kernel
		#

		obj-y := setup.o io.o
		obj-y := setup.o

arch/sh/boards/mach-snapgear/io.c

deleted100644 → 0

+0 −121

Original line number	Diff line number	Diff line
		/*
		* Copyright (C) 2002 David McCullough <davidm@snapgear.com>
		* Copyright (C) 2001 Ian da Silva, Jeremy Siegel
		* Based largely on io_se.c.
		*
		* I/O routine for Hitachi 7751 SolutionEngine.
		*
		* Initial version only to support LAN access; some
		* placeholder code from io_se.c left in with the
		* expectation of later SuperIO and PCMCIA access.
		*/
		#include <linux/kernel.h>
		#include <linux/types.h>
		#include <linux/pci.h>
		#include <asm/io.h>
		#include <asm/addrspace.h>

		#ifdef CONFIG_SH_SECUREEDGE5410
		unsigned short secureedge5410_ioport;
		#endif

		static inline volatile __u16 *port2adr(unsigned int port)
		{
		maybebadio((unsigned long)port);
		return (volatile __u16*)port;
		}

		/*
		* General outline: remap really low stuff [eventually] to SuperIO,
		* stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
		* is mapped through the PCI IO window. Stuff with high bits (PXSEG)
		* should be way beyond the window, and is used w/o translation for
		* compatibility.
		*/
		unsigned char snapgear_inb(unsigned long port)
		{
		if (PXSEG(port))
		return (volatile unsigned char )port;
		else
		return (*port2adr(port)) & 0xff;
		}

		unsigned char snapgear_inb_p(unsigned long port)
		{
		unsigned char v;

		if (PXSEG(port))
		v = (volatile unsigned char )port;
		else
		v = (*port2adr(port))&0xff;
		ctrl_delay();
		return v;
		}

		unsigned short snapgear_inw(unsigned long port)
		{
		if (PXSEG(port))
		return (volatile unsigned short )port;
		else if (port >= 0x2000)
		return *port2adr(port);
		else
		maybebadio(port);
		return 0;
		}

		unsigned int snapgear_inl(unsigned long port)
		{
		if (PXSEG(port))
		return (volatile unsigned long )port;
		else if (port >= 0x2000)
		return *port2adr(port);
		else
		maybebadio(port);
		return 0;
		}

		void snapgear_outb(unsigned char value, unsigned long port)
		{

		if (PXSEG(port))
		(volatile unsigned char )port = value;
		else
		*(port2adr(port)) = value;
		}

		void snapgear_outb_p(unsigned char value, unsigned long port)
		{
		if (PXSEG(port))
		(volatile unsigned char )port = value;
		else
		*(port2adr(port)) = value;
		ctrl_delay();
		}

		void snapgear_outw(unsigned short value, unsigned long port)
		{
		if (PXSEG(port))
		(volatile unsigned short )port = value;
		else if (port >= 0x2000)
		*port2adr(port) = value;
		else
		maybebadio(port);
		}

		void snapgear_outl(unsigned int value, unsigned long port)
		{
		if (PXSEG(port))
		(volatile unsigned long )port = value;
		else
		maybebadio(port);
		}

		void snapgear_insl(unsigned long port, void *addr, unsigned long count)
		{
		maybebadio(port);
		}

		void snapgear_outsl(unsigned long port, const void *addr, unsigned long count)
		{
		maybebadio(port);
		}

arch/sh/boards/mach-snapgear/setup.c

+10 −26

Original line number	Diff line number	Diff line
		/*
		* linux/arch/sh/boards/snapgear/setup.c
		*
		* Copyright (C) 2002 David McCullough <davidm@snapgear.com>
		* Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org>
		*
		@@ -24,13 +22,14 @@
		#include <asm/io.h>
		#include <cpu/timer.h>

		unsigned short secureedge5410_ioport;

		/*
		* EraseConfig handling functions
		*/

		static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
		{
		(void)__raw_readb(0xb8000000); /* dummy read */
		ctrl_delay(); /* dummy read */

		printk("SnapGear: erase switch interrupt!\n");

		@@ -39,21 +38,22 @@ static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)

		static int __init eraseconfig_init(void)
		{
		unsigned int irq = evt2irq(0x240);

		printk("SnapGear: EraseConfig init\n");

		/* Setup "EraseConfig" switch on external IRQ 0 */
		if (request_irq(IRL0_IRQ, eraseconfig_interrupt, IRQF_DISABLED,
		if (request_irq(irq, eraseconfig_interrupt, IRQF_DISABLED,
		"Erase Config", NULL))
		printk("SnapGear: failed to register IRQ%d for Reset witch\n",
		IRL0_IRQ);
		irq);
		else
		printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
		IRL0_IRQ);
		return(0);
		irq);
		return 0;
		}

		module_init(eraseconfig_init);

		/****************************************************************************/
		/*
		* Initialize IRQ setting
		*
		@@ -62,7 +62,6 @@ module_init(eraseconfig_init);
		* IRL2 = eth1
		* IRL3 = crypto
		*/

		static void __init init_snapgear_IRQ(void)
		{
		printk("Setup SnapGear IRQ/IPR ...\n");
		@@ -76,20 +75,5 @@ static void __init init_snapgear_IRQ(void)
		static struct sh_machine_vector mv_snapgear __initmv = {
		.mv_name = "SnapGear SecureEdge5410",
		.mv_nr_irqs = 72,

		.mv_inb = snapgear_inb,
		.mv_inw = snapgear_inw,
		.mv_inl = snapgear_inl,
		.mv_outb = snapgear_outb,
		.mv_outw = snapgear_outw,
		.mv_outl = snapgear_outl,

		.mv_inb_p = snapgear_inb_p,
		.mv_inw_p = snapgear_inw,
		.mv_inl_p = snapgear_inl,
		.mv_outb_p = snapgear_outb_p,
		.mv_outw_p = snapgear_outw,
		.mv_outl_p = snapgear_outl,

		.mv_init_irq = init_snapgear_IRQ,
		};

arch/sh/include/mach-common/mach/snapgear.h

+0 −22

Original line number	Diff line number	Diff line
		@@ -12,30 +12,9 @@
		#ifndef _ASM_SH_IO_SNAPGEAR_H
		#define _ASM_SH_IO_SNAPGEAR_H

		#if defined(CONFIG_CPU_SH4)
		/*
		* The external interrupt lines, these take up ints 0 - 15 inclusive
		* depending on the priority for the interrupt. In fact the priority
		* is the interrupt :-)
		*/

		#define IRL0_IRQ 2
		#define IRL0_PRIORITY 13

		#define IRL1_IRQ 5
		#define IRL1_PRIORITY 10

		#define IRL2_IRQ 8
		#define IRL2_PRIORITY 7

		#define IRL3_IRQ 11
		#define IRL3_PRIORITY 4
		#endif

		#define __IO_PREFIX snapgear
		#include <asm/io_generic.h>

		#ifdef CONFIG_SH_SECUREEDGE5410
		/*
		* We need to remember what was written to the ioport as some bits
		* are shared with other functions and you cannot read back what was
		@@ -66,6 +45,5 @@ extern unsigned short secureedge5410_ioport;
		((secureedge5410_ioport & ~(mask)) \| ((val) & (mask)))))
		#define SECUREEDGE_READ_IOPORT() \
		((*SECUREEDGE_IOPORT_ADDR&0x0817) \| (secureedge5410_ioport&~0x0817))
		#endif

		#endif /* _ASM_SH_IO_SNAPGEAR_H */