Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 2d9e1beb authored by Sathish Ambley's avatar Sathish Ambley Committed by Rajesh Bharathwaj
Browse files

ARM: dts: msm: Add support for ov9282 dual camera support 



Add support for ov9282 dual camera sensors with the images from
the two sensors stitched together.

Change-Id: I4ac5aecca4d7ecc4fb9d04a6fdf64c871f486cbf
Signed-off-by: default avatarSathish Ambley <sathishambley@codeaurora.org>
Acked-by: default avatarRajesh Bharathwaj <rajeshbharathwaj@codeaurora.org>
parent 19c7c24c

arch/arm/boot/dts/qcom/msm8998-camera-sensor-svr20.dtsi

0 → 100644
+399 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2016-2017, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&soc {

	led_flash0: qcom,camera-flash@0 {

		cell-index = <0>;

		compatible = "qcom,camera-flash";

		qcom,flash-source = <&pmi8998_flash0 &pmi8998_flash1>;

		qcom,torch-source = <&pmi8998_torch0 &pmi8998_torch1>;

		qcom,switch-source = <&pmi8998_switch0>;

		status = "ok";

	};



	led_flash1: qcom,camera-flash@1 {

		cell-index = <1>;

		compatible = "qcom,camera-flash";

		qcom,flash-source = <&pmi8998_flash2>;

		qcom,torch-source = <&pmi8998_torch2>;

		qcom,switch-source = <&pmi8998_switch1>;

		status = "ok";

	};

};



&cci {

	actuator0: qcom,actuator@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

		gpios = <&tlmm 27 0>;

		qcom,gpio-vaf = <0>;

		qcom,gpio-req-tbl-num = <0>;

		qcom,gpio-req-tbl-flags = <0>;

		qcom,gpio-req-tbl-label = "CAM_VAF";

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_actuator_vaf_active>;

		pinctrl-1 = <&cam_actuator_vaf_suspend>;

	};



	actuator1: qcom,actuator@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,actuator";

		qcom,cci-master = <1>;

		gpios = <&tlmm 27 0>;

		qcom,gpio-vaf = <0>;

		qcom,gpio-req-tbl-num = <0>;

		qcom,gpio-req-tbl-flags = <0>;

		qcom,gpio-req-tbl-label = "CAM_VAF";

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_actuator_vaf_active>;

		pinctrl-1 = <&cam_actuator_vaf_suspend>;

	};



	ois0: qcom,ois@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,ois";

		qcom,cci-master = <0>;

		gpios = <&tlmm 27 0>;

		qcom,gpio-vaf = <0>;

		qcom,gpio-req-tbl-num = <0>;

		qcom,gpio-req-tbl-flags = <0>;

		qcom,gpio-req-tbl-label = "CAM_VAF";

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_actuator_vaf_active>;

		pinctrl-1 = <&cam_actuator_vaf_suspend>;

		status = "disabled";

	};



	eeprom0: qcom,eeprom@0 {

		cell-index = <0>;

		reg = <0>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&pmi8998_bob>;

		cam_vdig-supply = <&pm8998_s3>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <0 3312000 1352000>;

		qcom,cam-vreg-max-voltage = <0 3600000 1352000>;

		qcom,cam-vreg-op-mode = <0 80000 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_rear_active

				&cam_actuator_vaf_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_rear_suspend

				&cam_actuator_vaf_suspend>;

		gpios = <&tlmm 13 0>,

			<&tlmm 30 0>,

			<&pm8998_gpios 20 0>,

			<&tlmm 29 0>,

			<&tlmm 27 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vdig = <2>;

		qcom,gpio-vana = <3>;

		qcom,gpio-vaf = <4>;

		qcom,gpio-req-tbl-num = <0 1 2 3 4>;

		qcom,gpio-req-tbl-flags = <1 0 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0",

					"CAM_VDIG",

					"CAM_VANA",

					"CAM_VAF";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_mmss clk_mclk0_clk_src>,

				<&clock_mmss clk_mmss_camss_mclk0_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	eeprom1: qcom,eeprom@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,eeprom";

		cam_vdig-supply = <&pm8998_lvs1>;

		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&pmi8998_bob>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";

		qcom,cam-vreg-min-voltage = <0 0 3312000>;

		qcom,cam-vreg-max-voltage = <0 0 3600000>;

		qcom,cam-vreg-op-mode = <0 0 80000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

				 &cam_sensor_rear2_active>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

				 &cam_sensor_rear2_suspend>;

		gpios = <&tlmm 15 0>,

			<&tlmm 9 0>,

			<&tlmm 8 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vana = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

					  "CAM_RESET1",

					  "CAM_VANA1";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_mmss clk_mclk2_clk_src>,

			<&clock_mmss clk_mmss_camss_mclk2_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	eeprom2: qcom,eeprom@2 {

		cell-index = <2>;

		reg = <0x2>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm8998_lvs1>;

		/*cam_vana-supply = <&pm8998_l22>;*/

		cam_vdig-supply = <&pm8998_s3>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage =

			<0 2864000 1352000>;

		qcom,cam-vreg-max-voltage =

			<0 2864000 1352000>;

		qcom,cam-vreg-op-mode = <0 80000 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_front_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				 &cam_sensor_front_suspend>;

		gpios = <&tlmm 14 0>,

			<&tlmm 28 0>,

			<&pm8998_gpios 9 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vdig = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2",

					"CAM_VDIG";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_mmss clk_mclk1_clk_src>,

			<&clock_mmss clk_mmss_camss_mclk1_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	qcom,camera@0 {

		cell-index = <0>;

		compatible = "qcom,camera";

		reg = <0x0>;

		qcom,csiphy-sd-index = <0>;

		qcom,csid-sd-index = <0>;

		qcom,mount-angle = <270>;

		cam_vio-supply = <&pm8998_l8>;

		cam_vana-supply = <&pmi8998_bob>;

		cam_vdig-supply = <&pm8998_l9>;

		cam_v_custom1-supply = <&pm8998_lvs1>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vana",

					"cam_vio", "cam_v_custom1";

		qcom,cam-vreg-min-voltage = <1808000 3312000 1200000 0>;

		qcom,cam-vreg-max-voltage = <2960000 3600000 1200000 0>;

		qcom,cam-vreg-op-mode = <0 80000 105000 0>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				 &cam_sensor_6dofl_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				 &cam_sensor_6dofl_suspend>;

		gpios = <&tlmm 13 0>,

			<&tlmm 148 0>,

			<&tlmm 93 0>,

			<&tlmm 52 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vana = <2>;

		qcom,gpio-vdig = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0",

					"CAM_VANA",

					"CAM_VDIG";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <1>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_mmss clk_mclk0_clk_src>,

				<&clock_mmss clk_mmss_camss_mclk0_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	qcom,camera@1 {

		cell-index = <1>;

		compatible = "qcom,camera";

		reg = <0x1>;

		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <1>;

		qcom,mount-angle = <90>;

		qcom,eeprom-src = <&eeprom1>;

		qcom,actuator-src = <&actuator1>;

		cam_vdig-supply = <&pm8998_lvs1>;

		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&pmi8998_bob>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";

		qcom,cam-vreg-min-voltage = <0 0 3312000>;

		qcom,cam-vreg-max-voltage = <0 0 3600000>;

		qcom,cam-vreg-op-mode = <0 0 80000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

				 &cam_sensor_rear2_active>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

				 &cam_sensor_rear2_suspend>;

		gpios = <&tlmm 15 0>,

			<&tlmm 9 0>,

			<&tlmm 8 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vana = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

					  "CAM_RESET1",

					  "CAM_VANA1";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_mmss clk_mclk2_clk_src>,

			<&clock_mmss clk_mmss_camss_mclk2_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};

	qcom,camera@2 {

		cell-index = <2>;

		compatible = "qcom,camera";

		reg = <0x02>;

		qcom,csiphy-sd-index = <2>;

		qcom,csid-sd-index = <2>;

		qcom,mount-angle = <90>;

		qcom,eeprom-src = <&eeprom2>;

		qcom,led-flash-src = <&led_flash1>;

		qcom,actuator-src = <&actuator1>;

		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&pmi8998_bob>;

		cam_vdig-supply = <&pm8998_s3>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage =

			<0 3312000 1352000>;

		qcom,cam-vreg-max-voltage =

			<0 3600000 1352000>;

		qcom,cam-vreg-op-mode = <0 80000 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_front_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				 &cam_sensor_front_suspend>;

		gpios = <&tlmm 14 0>,

			<&tlmm 28 0>,

			<&pm8998_gpios 9 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vdig = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2",

					"CAM_VDIG";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "disabled";

		clocks = <&clock_mmss clk_mclk1_clk_src>,

			<&clock_mmss clk_mmss_camss_mclk1_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};

	qcom,camera@3 {

		cell-index = <3>;

		compatible = "qcom,camera";

		reg = <0x3>;

		qcom,csiphy-sd-index = <0>;

		qcom,csid-sd-index = <0>;

		qcom,mount-angle = <270>;

		cam_vio-supply = <&pm8998_l8>;

		cam_vana-supply = <&pmi8998_bob>;

		cam_vdig-supply = <&pm8998_l9>;

		cam_v_custom1-supply = <&pm8998_lvs1>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vana",

					"cam_vio", "cam_v_custom1";

		qcom,cam-vreg-min-voltage = <1808000 3312000 1200000 0>;

		qcom,cam-vreg-max-voltage = <2960000 3600000 1200000 0>;

		qcom,cam-vreg-op-mode = <0 80000 105000 0>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				 &cam_sensor_6dofr_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				 &cam_sensor_6dofr_suspend>;

		gpios = <&tlmm 13 0>,

			<&tlmm 149 0>,

			<&tlmm 93 0>,

			<&tlmm 52 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vana = <2>;

		qcom,gpio-vdig = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

					  "CAM_RESET1",

					  "CAM_VANA1",

					  "CAM_VDIG1";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <1>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_mmss clk_mclk0_clk_src>,

			<&clock_mmss clk_mmss_camss_mclk0_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



};



&pm8998_gpios {

	gpio@c800 { /* GPIO 9 - CAMERA SENSOR 2 VDIG */

		qcom,mode = <1>;		/* Output */

		qcom,pull = <5>;		/* No Pull */

		qcom,vin-sel = <0>;		/* VIN1 GPIO_LV */

		qcom,src-sel = <0>;		/* GPIO */

		qcom,invert = <0>;		/* Invert */

		qcom,master-en = <1>;		/* Enable GPIO */

		status = "ok";

	};



	gpio@d300 { /* GPIO 20 - CAMERA SENSOR 0 VDIG */

		qcom,mode = <1>;		/* Output */

		qcom,pull = <5>;		/* No Pull */

		qcom,vin-sel = <1>;		/* VIN1 GPIO_MV */

		qcom,src-sel = <0>;		/* GPIO */

		qcom,invert = <0>;		/* Invert */

		qcom,master-en = <1>;		/* Enable GPIO */

		status = "ok";

	};

};

arch/arm/boot/dts/qcom/msm8998-svr20.dtsi

+1 −0
Original line number Diff line number Diff line
@@ -12,6 +12,7 @@ 


#include <dt-bindings/interrupt-controller/irq.h>

#include "msm8998-svr20-pinctrl.dtsi"

#include "msm8998-camera-sensor-svr20.dtsi"

&vendor {

	bluetooth: bt_wcn3990 {

		compatible = "qca,wcn3990";