Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 291a7d13 authored by Chandana Kishori Chiluveru's avatar Chandana Kishori Chiluveru Committed by Gerrit - the friendly Code Review server
Browse files

ARM: dts: msm: Add support for USB device for msmfalcon and msmtriton 



Add common dtsi file for msmfalcon and msmtriton. Also Add
device tree entry for super speed USB3 controller, super speed
phy and high speed phy.

Change-Id: I326eceeddff8e77d346c3365fa46cd539324451f
Signed-off-by: default avatarChandana Kishori Chiluveru <cchiluve@codeaurora.org>
parent 4b1c2e22

arch/arm/boot/dts/qcom/msmfalcon-common.dtsi

0 → 100644
+196 −0
Original line number Original line Diff line number Diff line 
/* Copyright (c) 2016, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&soc {

	usb3: ssusb@a800000 {

		compatible = "qcom,dwc-usb3-msm";

		reg = <0x0a800000 0xfc100>,

			<0x0c016000 0x400>;

		reg-names = "core_base",

		"ahb2phy_base";

		#address-cells = <1>;

		#size-cells = <1>;

		ranges;



		interrupts = <0 347 0>, <0 243 0>, <0 180 0>;

		interrupt-names = "hs_phy_irq", "ss_phy_irq", "pwr_event_irq";



		USB3_GDSC-supply = <&gdsc_usb30>;



		qcom,usb-dbm = <&dbm_1p5>;

		qcom,msm-bus,name = "usb3";

		qcom,msm-bus,num-cases = <2>;

		qcom,msm-bus,num-paths = <1>;

		qcom,msm-bus,vectors-KBps =

				<61 512 0 0>,

				<61 512 240000 800000>;



		qcom,dwc-usb3-msm-tx-fifo-size = <21288>;



		clocks = <&clock_gcc GCC_USB30_MASTER_CLK>,

			<&clock_gcc GCC_CFG_NOC_USB3_AXI_CLK>,

			<&clock_gcc GCC_AGGRE2_USB3_AXI_CLK>,

			<&clock_gcc GCC_USB30_MOCK_UTMI_CLK>,

			<&clock_gcc GCC_USB30_SLEEP_CLK>,

			<&clock_gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,

			<&clock_rpmcc CXO_DWC3_CLK>;



		clock-names = "core_clk", "iface_clk", "bus_aggr_clk",

				"utmi_clk", "sleep_clk", "cfg_ahb_clk", "xo";



		resets = <&clock_gcc GCC_USB_30_BCR>;

		reset-names = "core_reset";



		dwc3@a800000 {

			compatible = "snps,dwc3";

			reg = <0x0a800000 0xc8d0>;

			interrupt-parent = <&intc>;

			interrupts = <0 131 0>;

			usb-phy = <&qusb_phy0>, <&ssphy>;

			tx-fifo-resize;

			snps,usb3-u1u2-disable;

			snps,nominal-elastic-buffer;

			snps,is-utmi-l1-suspend;

			snps,hird-threshold = /bits/ 8 <0x0>;

		};



		qcom,usbbam@a904000 {

			compatible = "qcom,usb-bam-msm";

			reg = <0x0a904000 0x17000>;

			interrupt-parent = <&intc>;

			interrupts = <0 132 0>;



			qcom,bam-type = <0>;

			qcom,usb-bam-fifo-baseaddr = <0x066bb000>;

			qcom,usb-bam-num-pipes = <8>;

			qcom,ignore-core-reset-ack;

			qcom,disable-clk-gating;

			qcom,usb-bam-override-threshold = <0x4001>;

			qcom,usb-bam-max-mbps-highspeed = <400>;

			qcom,usb-bam-max-mbps-superspeed = <3600>;

			qcom,reset-bam-on-connect;



			qcom,pipe0 {

				label = "ssusb-ipa-out-0";

				qcom,usb-bam-mem-type = <1>;

				qcom,dir = <0>;

				qcom,pipe-num = <0>;

				qcom,peer-bam = <1>;

				qcom,src-bam-pipe-index = <1>;

				qcom,data-fifo-size = <0x8000>;

				qcom,descriptor-fifo-size = <0x2000>;

			};

			qcom,pipe1 {

				label = "ssusb-ipa-in-0";

				qcom,usb-bam-mem-type = <1>;

				qcom,dir = <1>;

				qcom,pipe-num = <0>;

				qcom,peer-bam = <1>;

				qcom,dst-bam-pipe-index = <0>;

				qcom,data-fifo-size = <0x8000>;

				qcom,descriptor-fifo-size = <0x2000>;

			};

			qcom,pipe2 {

				label = "ssusb-qdss-in-0";

				qcom,usb-bam-mem-type = <2>;

				qcom,dir = <1>;

				qcom,pipe-num = <0>;

				qcom,peer-bam = <0>;

				qcom,peer-bam-physical-address = <0x06064000>;

				qcom,src-bam-pipe-index = <0>;

				qcom,dst-bam-pipe-index = <2>;

				qcom,data-fifo-offset = <0x0>;

				qcom,data-fifo-size = <0x1800>;

				qcom,descriptor-fifo-offset = <0x1800>;

				qcom,descriptor-fifo-size = <0x800>;

			};

			qcom,pipe3 {

				label = "ssusb-dpl-ipa-in-1";

				qcom,usb-bam-mem-type = <1>;

				qcom,dir = <1>;

				qcom,pipe-num = <1>;

				qcom,peer-bam = <1>;

				qcom,dst-bam-pipe-index = <2>;

				qcom,data-fifo-size = <0x8000>;

				qcom,descriptor-fifo-size = <0x2000>;

			};

		};

	};



	qusb_phy0: qusb@c012000 {

		compatible = "qcom,qusb2phy";

		reg = <0x0c012000 0x180>,

			<0x00188018 0x4>;

		reg-names = "qusb_phy_base",

			"ref_clk_addr";

		vdd-supply = <&pm2falcon_l1>;

		vdda18-supply = <&pmfalcon_l10>;

		vdda33-supply = <&pm2falcon_l7>;

		qcom,vdd-voltage-level = <0 925000 925000>;

		qcom,tune2-efuse-bit-pos = <21>;

		qcom,tune2-efuse-num-bits = <4>;

		qcom,enable-dpdm-pulsing;

		qcom,qusb-phy-init-seq = <0xf8 0x80

					0xb3 0x84

					0x83 0x88

					0xc0 0x8c

					0x30 0x08

					0x79 0x0c

					0x21 0x10

					0x14 0x9c

					0x9f 0x1c

					0x00 0x18>;

		phy_type= "utmi";



		clocks = <&clock_rpmcc RPM_LN_BB_CLK1>,

			<&clock_gcc GCC_RX0_USB2_CLKREF_CLK>,

			<&clock_gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;



		clock-names =  "ref_clk_src", "ref_clk", "cfg_ahb_clk";



		resets = <&clock_gcc GCC_QUSB2PHY_PRIM_BCR>;

		reset-names = "phy_reset";

	};



	ssphy: ssphy@c010000 {

		compatible = "qcom,usb-ssphy-qmp-v2";

		reg = <0xc010000 0x7a8>,

			<0x01fcb244 0x4>,

			<0x01fcb248 0x4>;

		reg-names = "qmp_phy_base",

			"vls_clamp_reg",

			"tcsr_usb3_dp_phymode";

		vdd-supply = <&pm2falcon_l1>;

		core-supply = <&pmfalcon_l10>;

		qcom,vdd-voltage-level = <0 925000 925000>;

		qcom,vbus-valid-override;



		clocks = <&clock_gcc GCC_USB3_PHY_AUX_CLK>,

			<&clock_gcc GCC_USB3_PHY_PIPE_CLK>,

			<&clock_gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,

			<&clock_rpmcc RPM_LN_BB_CLK1>,

			<&clock_gcc GCC_USB3_CLKREF_CLK>;



		clock-names = "aux_clk", "pipe_clk", "cfg_ahb_clk",

				"ref_clk_src", "ref_clk";



		resets = <&clock_gcc GCC_USB3_PHY_BCR>,

			<&clock_gcc GCC_USB3PHY_PHY_BCR>;

		reset-names = "phy_reset", "phy_phy_reset";

	};



	dbm_1p5: dbm@a8f8000 {

		compatible = "qcom,usb-dbm-1p5";

		reg = <0xa8f8000 0x300>;

		qcom,reset-ep-after-lpm-resume;

	};

};

arch/arm/boot/dts/qcom/msmfalcon-rumi.dts

+32 −0
Original line number Original line Diff line number Diff line
@@ -26,6 +26,38 @@ 
	};

	};

};

};





&usb3 {

	/delete-property/ USB3_GDSC-supply;

	dwc3@a800000 {

		maximum-speed = "high-speed";

	};

};



&ssphy {

	compatible =  "usb-nop-xceiv";

};



&qusb_phy0 {

	reg = <0x0a928000 0x8000>,

		<0x0a8f8800 0x400>,

		<0x0a920000 0x100>;

		reg-names = "qusb_phy_base",

			"qscratch_base",

			"emu_phy_base";

		qcom,emulation;

		qcom,qusb-phy-init-seq = <0x19 0x1404

					0x20 0x1414

					0x79 0x1410

					0x00 0x1418

					0x99 0x1404

					0x04 0x1408

					0xd9 0x1404>;

		qcom,emu-dcm-reset-seq = <0x100000 0x20

					0x0 0x20

					0x1a0 0x20

					0x5 0x14>;

};



&uartblsp1dm1 {

&uartblsp1dm1 {

	status = "ok";

	status = "ok";

	pinctrl-names = "default";

	pinctrl-names = "default";

arch/arm/boot/dts/qcom/msmfalcon-sim.dts

+16 −0
Original line number Original line Diff line number Diff line
@@ -26,6 +26,22 @@ 
	};

	};

};

};





&usb3 {

	reg = <0xa800000 0xfc000>;

	reg-names = "core_base";

	dwc3@a800000 {

		maximum-speed = "high-speed";

	};

};



&ssphy {

	compatible =  "usb-nop-xceiv";

};



&qusb_phy0 {

	compatible =  "usb-nop-xceiv";

};



&uartblsp1dm1 {

&uartblsp1dm1 {

	status = "ok";

	status = "ok";

	pinctrl-names = "default";

	pinctrl-names = "default";

arch/arm/boot/dts/qcom/msmfalcon.dtsi

+1 −0
Original line number Original line Diff line number Diff line
@@ -967,4 +967,5 @@ 
#include "msm-pm2falcon.dtsi"

#include "msm-pm2falcon.dtsi"

#include "msm-arm-smmu-falcon.dtsi"

#include "msm-arm-smmu-falcon.dtsi"

#include "msm-arm-smmu-impl-defs-falcon.dtsi"

#include "msm-arm-smmu-impl-defs-falcon.dtsi"

#include "msmfalcon-common.dtsi"

#include "msmfalcon-blsp.dtsi"
 
#include "msmfalcon-blsp.dtsi"

arch/arm/boot/dts/qcom/msmtriton-rumi.dts

+31 −0
Original line number Original line Diff line number Diff line
@@ -22,6 +22,37 @@ 
	qcom,board-id = <15 0>;

	qcom,board-id = <15 0>;

};

};





&usb3 {

	dwc3@a800000 {

		maximum-speed = "high-speed";

	};

};



&ssphy {

	compatible =  "usb-nop-xceiv";

};



&qusb_phy0 {

	reg = <0x0a928000 0x8000>,

		<0x0a8f8800 0x400>,

		<0x0a920000 0x100>;

	reg-names = "qusb_phy_base",

		"qscratch_base",

		"emu_phy_base";

	qcom,emulation;

	qcom,qusb-phy-init-seq = <0x19 0x1404

				0x20 0x1414

				0x79 0x1410

				0x00 0x1418

				0x99 0x1404

				0x04 0x1408

				0xd9 0x1404>;

	qcom,emu-dcm-reset-seq = <0x100000 0x20

				0x0 0x20

				0x1a0 0x20

				0x5 0x14>;

};



&uartblsp1dm1 {

&uartblsp1dm1 {

	status = "ok";

	status = "ok";

	pinctrl-names = "default";

	pinctrl-names = "default";