Merge "ARM: dts: msm: Add support for MSM8996proAU ADP" into dev/msm-4.4-8996au

	msm8996-v3-dtp.dtb \

	msm8996-v3-pm8004-mmxf-adp.dtb \

	msm8996-v3-pm8004-agave-adp.dtb \

	msm8996pro-auto-adp.dtb \

	msm8996pro-auto-cdp.dtb \

	msm8996pro-pmi8994-cdp.dtb \

	msm8996pro-pmi8994-mtp.dtb \

/* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */

/dts-v1/;

#include "msm8996pro.dtsi"

#include "msm8996-pm8994.dtsi"

#include "msm8996-agave-adp.dtsi"

/ {

	model = "Qualcomm Technologies, Inc. MSM 8996pro AUTO ADP";

	compatible = "qcom,msm8996-adp", "qcom,msm8996", "qcom,adp";

	qcom,msm-id = <315 0x10000>;

	qcom,board-id = <0x02010019 0>;

};

&spi_9 {

	status = "ok";

	can-controller@0 {

		compatible = "renesas,rh850";

		reg = <0>;

		interrupt-parent = <&tlmm>;

		interrupts = <122 0>;

		spi-max-frequency = <5000000>;

	};

};

&pm8994_mpps {

	mpp@a500 { /* MPP 6 */

		qcom,mode = <1>;		/* Digital output */

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,vin-sel = <2>;		/* S4 1.8V */

		qcom,src-sel = <0>;		/* Constant */

		qcom,master-en = <1>;		/* Enable GPIO */

		status = "okay";

	};

};

&hl7509_en_vreg {

	status = "ok";

};

&hl7509_vreg {

	status = "ok";

};

&gfx_cpr {

	vdd-supply = <&hl7509_vreg>;

	qcom,cpr-step-quot-init-min = <20>;

	qcom,cpr-step-quot-init-max = <26>;

	qcom,voltage-step = <10000>;

	/delete-property/ qcom,cpr-enable;

};

&gfx_vreg {

	qcom,cpr-voltage-ceiling =

		<600000  670000  670000  750000  830000

		 910000  960000 1020000>;

	qcom,cpr-voltage-floor =

		<600000  600000  600000  600000  600000

		 600000  600000  600000>;

};

&pm8994_l3 {

	regulator-min-microvolt = <875000>;

	regulator-max-microvolt = <875000>;

	qcom,init-voltage = <875000>;

};

&pm8994_l11 {

	regulator-min-microvolt = <850000>;

	regulator-max-microvolt = <850000>;

	qcom,init-voltage = <850000>;

};

&pm8994_l17 {

	regulator-min-microvolt = <1800000>;

	regulator-max-microvolt = <1800000>;

	qcom,init-voltage = <1800000>;

};

&pm8994_l23 {

	regulator-min-microvolt = <1100000>;

	regulator-max-microvolt = <1100000>;

	qcom,init-voltage = <1100000>;

};

&pm8994_l27 {

	regulator-min-microvolt = <800000>;

	regulator-max-microvolt = <800000>;

	qcom,init-voltage = <800000>;

};

&pm8994_l29 {

	regulator-min-microvolt = <2500000>;

	regulator-max-microvolt = <2500000>;

	qcom,init-voltage = <2500000>;

};

&rpm_bus {

	rpm-regulator-ldoa26 {

		/delete-node/ pm8994_l26_corner;

		/delete-node/ pm8994_l26_floor_corner;

		pm8994_l26: regulator-l26 {

			regulator-min-microvolt = <1100000>;

			regulator-max-microvolt = <1100000>;

			qcom,init-voltage = <1100000>;

			status = "okay";

		};

	};

	rpm-regulator-ldoa31 {

		status = "okay";

		pm8994_l31: regulator-l31 {

			regulator-min-microvolt = <1100000>;

			regulator-max-microvolt = <1100000>;

			qcom,init-voltage = <1100000>;

			status = "okay";

		};

	};

};

&gfx_vreg {

	qcom,cpr-voltage-ceiling =

		/* Speed bin 0 */

		<600000  670000  670000  750000  830000  910000  960000 1020000

		1070000>,

		/* Speed bin 1 */

		<600000  670000  670000  750000  830000  910000  960000 1020000

		1070000>;

	qcom,cpr-voltage-floor =

		/* Speed bin 0 */

		<600000  600000  600000  600000  600000  600000  600000  600000

		 600000>,

		/* Speed bin 1 */

		<600000  600000  600000  600000  600000  600000  600000  600000

		 600000>;

};