Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 0795cd29 authored by John W. Linville's avatar John W. Linville
Browse files

ipw2x00: relocate ipw2100/ipw2200 to common directory 



Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 2ba4b32e

drivers/net/wireless/Kconfig

+1 −146
Original line number Diff line number Diff line
@@ -123,152 +123,6 @@ config PCMCIA_RAYCS 
	  To compile this driver as a module, choose M here: the module will be

	  called ray_cs.  If unsure, say N.



config IPW2100

	tristate "Intel PRO/Wireless 2100 Network Connection"

	depends on PCI && WLAN_80211

	select WIRELESS_EXT

	select FW_LOADER

	select LIB80211

	select IEEE80211

	---help---

          A driver for the Intel PRO/Wireless 2100 Network 

	  Connection 802.11b wireless network adapter.



          See <file:Documentation/networking/README.ipw2100> for information on

          the capabilities currently enabled in this driver and for tips

          for debugging issues and problems.



	  In order to use this driver, you will need a firmware image for it.

          You can obtain the firmware from

	  <http://ipw2100.sf.net/>.  Once you have the firmware image, you 

	  will need to place it in /lib/firmware.



          You will also very likely need the Wireless Tools in order to

          configure your card:



          <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.



          It is recommended that you compile this driver as a module (M)

          rather than built-in (Y). This driver requires firmware at device

          initialization time, and when built-in this typically happens

          before the filesystem is accessible (hence firmware will be

          unavailable and initialization will fail). If you do choose to build

          this driver into your kernel image, you can avoid this problem by

          including the firmware and a firmware loader in an initramfs.

 

config IPW2100_MONITOR

        bool "Enable promiscuous mode"

        depends on IPW2100

        ---help---

	  Enables promiscuous/monitor mode support for the ipw2100 driver.

	  With this feature compiled into the driver, you can switch to 

	  promiscuous mode via the Wireless Tool's Monitor mode.  While in this

	  mode, no packets can be sent.



config IPW2100_DEBUG

	bool "Enable full debugging output in IPW2100 module."

	depends on IPW2100

	---help---

	  This option will enable debug tracing output for the IPW2100.  



	  This will result in the kernel module being ~60k larger.  You can 

	  control which debug output is sent to the kernel log by setting the 

	  value in 



	  /sys/bus/pci/drivers/ipw2100/debug_level



	  This entry will only exist if this option is enabled.



	  If you are not trying to debug or develop the IPW2100 driver, you 

	  most likely want to say N here.



config IPW2200

	tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection"

	depends on PCI && WLAN_80211

	select WIRELESS_EXT

	select FW_LOADER

	select LIB80211

	select IEEE80211

	---help---

          A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network

	  Connection adapters. 



          See <file:Documentation/networking/README.ipw2200> for 

	  information on the capabilities currently enabled in this 

	  driver and for tips for debugging issues and problems.



	  In order to use this driver, you will need a firmware image for it.

          You can obtain the firmware from

	  <http://ipw2200.sf.net/>.  See the above referenced README.ipw2200 

	  for information on where to install the firmware images.



          You will also very likely need the Wireless Tools in order to

          configure your card:



          <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.



          It is recommended that you compile this driver as a module (M)

          rather than built-in (Y). This driver requires firmware at device

          initialization time, and when built-in this typically happens

          before the filesystem is accessible (hence firmware will be

          unavailable and initialization will fail). If you do choose to build

          this driver into your kernel image, you can avoid this problem by

          including the firmware and a firmware loader in an initramfs.



config IPW2200_MONITOR

        bool "Enable promiscuous mode"

        depends on IPW2200

        ---help---

	  Enables promiscuous/monitor mode support for the ipw2200 driver.

	  With this feature compiled into the driver, you can switch to 

	  promiscuous mode via the Wireless Tool's Monitor mode.  While in this

	  mode, no packets can be sent.



config IPW2200_RADIOTAP

	bool "Enable radiotap format 802.11 raw packet support"

	depends on IPW2200_MONITOR



config IPW2200_PROMISCUOUS

	bool "Enable creation of a RF radiotap promiscuous interface"

	depends on IPW2200_MONITOR

	select IPW2200_RADIOTAP

	---help---

          Enables the creation of a second interface prefixed 'rtap'. 

          This second interface will provide every received in radiotap

	  format.



          This is useful for performing wireless network analysis while

          maintaining an active association.



          Example usage:



            % modprobe ipw2200 rtap_iface=1

            % ifconfig rtap0 up

            % tethereal -i rtap0



          If you do not specify 'rtap_iface=1' as a module parameter then 

          the rtap interface will not be created and you will need to turn 

          it on via sysfs:

	

            % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface



config IPW2200_QOS

        bool "Enable QoS support"

        depends on IPW2200 && EXPERIMENTAL



config IPW2200_DEBUG

	bool "Enable full debugging output in IPW2200 module."

	depends on IPW2200

	---help---

	  This option will enable low level debug tracing output for IPW2200.



	  Note, normal debug code is already compiled in. This low level

	  debug option enables debug on hot paths (e.g Tx, Rx, ISR) and

	  will result in the kernel module being ~70 larger.  Most users

	  will typically not need this high verbosity debug information.



	  If you are not sure, say N here.



config LIBERTAS

	tristate "Marvell 8xxx Libertas WLAN driver support"

	depends on WLAN_80211
@@ -714,6 +568,7 @@ config MAC80211_HWSIM 
source "drivers/net/wireless/p54/Kconfig"

source "drivers/net/wireless/ath5k/Kconfig"

source "drivers/net/wireless/ath9k/Kconfig"

source "drivers/net/wireless/ipw2x00/Kconfig"

source "drivers/net/wireless/iwlwifi/Kconfig"

source "drivers/net/wireless/hostap/Kconfig"

source "drivers/net/wireless/b43/Kconfig"

drivers/net/wireless/Makefile

+2 −3
Original line number Diff line number Diff line
@@ -2,9 +2,8 @@ 
# Makefile for the Linux Wireless network device drivers.

#



obj-$(CONFIG_IPW2100) += ipw2100.o



obj-$(CONFIG_IPW2200) += ipw2200.o

obj-$(CONFIG_IPW2100) += ipw2x00/

obj-$(CONFIG_IPW2200) += ipw2x00/



obj-$(CONFIG_STRIP) += strip.o

obj-$(CONFIG_ARLAN) += arlan.o

drivers/net/wireless/ipw2x00/Kconfig

0 → 100644
+150 −0
Original line number Diff line number Diff line 
#

# Intel Centrino wireless drivers

#



config IPW2100

	tristate "Intel PRO/Wireless 2100 Network Connection"

	depends on PCI && WLAN_80211

	select WIRELESS_EXT

	select FW_LOADER

	select LIB80211

	select IEEE80211

	---help---

          A driver for the Intel PRO/Wireless 2100 Network 

	  Connection 802.11b wireless network adapter.



          See <file:Documentation/networking/README.ipw2100> for information on

          the capabilities currently enabled in this driver and for tips

          for debugging issues and problems.



	  In order to use this driver, you will need a firmware image for it.

          You can obtain the firmware from

	  <http://ipw2100.sf.net/>.  Once you have the firmware image, you 

	  will need to place it in /lib/firmware.



          You will also very likely need the Wireless Tools in order to

          configure your card:



          <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.



          It is recommended that you compile this driver as a module (M)

          rather than built-in (Y). This driver requires firmware at device

          initialization time, and when built-in this typically happens

          before the filesystem is accessible (hence firmware will be

          unavailable and initialization will fail). If you do choose to build

          this driver into your kernel image, you can avoid this problem by

          including the firmware and a firmware loader in an initramfs.

 

config IPW2100_MONITOR

        bool "Enable promiscuous mode"

        depends on IPW2100

        ---help---

	  Enables promiscuous/monitor mode support for the ipw2100 driver.

	  With this feature compiled into the driver, you can switch to 

	  promiscuous mode via the Wireless Tool's Monitor mode.  While in this

	  mode, no packets can be sent.



config IPW2100_DEBUG

	bool "Enable full debugging output in IPW2100 module."

	depends on IPW2100

	---help---

	  This option will enable debug tracing output for the IPW2100.  



	  This will result in the kernel module being ~60k larger.  You can 

	  control which debug output is sent to the kernel log by setting the 

	  value in 



	  /sys/bus/pci/drivers/ipw2100/debug_level



	  This entry will only exist if this option is enabled.



	  If you are not trying to debug or develop the IPW2100 driver, you 

	  most likely want to say N here.



config IPW2200

	tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection"

	depends on PCI && WLAN_80211

	select WIRELESS_EXT

	select FW_LOADER

	select LIB80211

	select IEEE80211

	---help---

          A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network

	  Connection adapters. 



          See <file:Documentation/networking/README.ipw2200> for 

	  information on the capabilities currently enabled in this 

	  driver and for tips for debugging issues and problems.



	  In order to use this driver, you will need a firmware image for it.

          You can obtain the firmware from

	  <http://ipw2200.sf.net/>.  See the above referenced README.ipw2200 

	  for information on where to install the firmware images.



          You will also very likely need the Wireless Tools in order to

          configure your card:



          <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.



          It is recommended that you compile this driver as a module (M)

          rather than built-in (Y). This driver requires firmware at device

          initialization time, and when built-in this typically happens

          before the filesystem is accessible (hence firmware will be

          unavailable and initialization will fail). If you do choose to build

          this driver into your kernel image, you can avoid this problem by

          including the firmware and a firmware loader in an initramfs.



config IPW2200_MONITOR

        bool "Enable promiscuous mode"

        depends on IPW2200

        ---help---

	  Enables promiscuous/monitor mode support for the ipw2200 driver.

	  With this feature compiled into the driver, you can switch to 

	  promiscuous mode via the Wireless Tool's Monitor mode.  While in this

	  mode, no packets can be sent.



config IPW2200_RADIOTAP

	bool "Enable radiotap format 802.11 raw packet support"

	depends on IPW2200_MONITOR



config IPW2200_PROMISCUOUS

	bool "Enable creation of a RF radiotap promiscuous interface"

	depends on IPW2200_MONITOR

	select IPW2200_RADIOTAP

	---help---

          Enables the creation of a second interface prefixed 'rtap'. 

          This second interface will provide every received in radiotap

	  format.



          This is useful for performing wireless network analysis while

          maintaining an active association.



          Example usage:



            % modprobe ipw2200 rtap_iface=1

            % ifconfig rtap0 up

            % tethereal -i rtap0



          If you do not specify 'rtap_iface=1' as a module parameter then 

          the rtap interface will not be created and you will need to turn 

          it on via sysfs:

	

            % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface



config IPW2200_QOS

        bool "Enable QoS support"

        depends on IPW2200 && EXPERIMENTAL



config IPW2200_DEBUG

	bool "Enable full debugging output in IPW2200 module."

	depends on IPW2200

	---help---

	  This option will enable low level debug tracing output for IPW2200.



	  Note, normal debug code is already compiled in. This low level

	  debug option enables debug on hot paths (e.g Tx, Rx, ISR) and

	  will result in the kernel module being ~70 larger.  Most users

	  will typically not need this high verbosity debug information.



	  If you are not sure, say N here.

drivers/net/wireless/ipw2x00/Makefile

0 → 100644
+6 −0
Original line number Diff line number Diff line 
#

# Makefile for the Intel Centrino wireless drivers

#



obj-$(CONFIG_IPW2100) += ipw2100.o

obj-$(CONFIG_IPW2200) += ipw2200.o