Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 071416f0 authored by Kui Wang's avatar Kui Wang
Browse files

ARM: dts: msm: update sensor dtsi for SDM660 QRD 



Update AUX camera cci master, and also update
rear and AUX camera sensor vdig configuration.
And update rear and aux sensor mount angle.

Change-Id: Iffab132fcfe1622d6716d027b30cb9f3c9a9795e
Signed-off-by: default avatarKui Wang <kuiw@codeaurora.org>
parent 0a8e939a

arch/arm/boot/dts/qcom/sdm660-camera-sensor-qrd.dtsi

+51 −49
Original line number Diff line number Diff line
@@ -21,7 +21,7 @@ 
		status = "ok";

	};



	cam_avdd_gpio_regulator:fixed_regulator@1 {

	cam_avdd_gpio_regulator:cam_avdd_fixed_regulator {

		compatible = "regulator-fixed";

		regulator-name = "cam_vadd_gpio_regulator";

		regulator-min-microvolt = <2800000>;
@@ -31,17 +31,7 @@ 
		vin-supply = <&pm660l_bob>;

	};



	cam_dvdd_gpio_regulator:fixed_regulator@1 {

		compatible = "regulator-fixed";

		regulator-name = "cam_vadd_gpio_regulator";

		regulator-min-microvolt = <1050000>;

		regulator-max-microvolt = <1050000>;

		enable-active-high;

		gpio = <&pm660l_gpios 4>;

		vin-supply = <&pm660_s5>;

	};



	cam_vaf_gpio_regulator:fixed_regulator@2 {

	cam_vaf_gpio_regulator:cam_vaf_fixed_regulator {

		compatible = "regulator-fixed";

		regulator-name = "cam_vaf_gpio_regulator";

		regulator-min-microvolt = <2800000>;
@@ -182,11 +172,11 @@ 
		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm660_l11>;

		cam_vana-supply = <&cam_avdd_gpio_regulator>;

		cam_vdig-supply = <&cam_dvdd_gpio_regulator>;

		cam_vdig-supply = <&pm660_s5>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <1750000 0 0>;

		qcom,cam-vreg-max-voltage = <1980000 0 0>;

		qcom,cam-vreg-op-mode = <105000 0 0>;

		qcom,cam-vreg-min-voltage = <1780000 0 1350000>;

		qcom,cam-vreg-max-voltage = <1950000 0 1350000>;

		qcom,cam-vreg-op-mode = <105000 0 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active
@@ -194,12 +184,15 @@ 
		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_rear_suspend>;

		gpios = <&tlmm 32 0>,

			<&tlmm 46 0>;

			<&tlmm 46 0>,

			<&pm660l_gpios 4 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-req-tbl-num = <0 1>;

		qcom,gpio-req-tbl-flags = <1 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0";

		qcom,gpio-vdig = <2>;

		qcom,gpio-req-tbl-num = <0 1 1>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET0",

					"CAM_VDIG";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;
@@ -216,11 +209,11 @@ 
		compatible = "qcom,eeprom";

		cam_vio-supply = <&pm660_l11>;

		cam_vana-supply = <&cam_avdd_gpio_regulator>;

		cam_vdig-supply = <&cam_dvdd_gpio_regulator>;

		cam_vdig-supply = <&pm660_s5>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <1750000 0 0>;

		qcom,cam-vreg-max-voltage = <1980000 0 0>;

		qcom,cam-vreg-op-mode = <105000 0 0>;

		qcom,cam-vreg-min-voltage = <1780000 0 1350000>;

		qcom,cam-vreg-max-voltage = <1950000 0 1350000>;

		qcom,cam-vreg-op-mode = <105000 0 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active
@@ -228,15 +221,18 @@ 
		pinctrl-1 = <&cam_sensor_mclk2_suspend

				 &cam_sensor_rear2_suspend>;

		gpios = <&tlmm 34 0>,

			<&tlmm 48 0>;

			<&tlmm 48 0>,

			<&pm660l_gpios 4 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-req-tbl-num = <0 1>;

		qcom,gpio-req-tbl-flags = <1 0>;

		qcom,gpio-vdig = <2>;

		qcom,gpio-req-tbl-num = <0 1 1>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

					  "CAM_RESET1";

					  "CAM_RESET1",

					  "CAM_VDIG";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_mmss MCLK2_CLK_SRC>,

		    <&clock_mmss MMSS_CAMSS_MCLK2_CLK>;
@@ -287,18 +283,18 @@ 
		reg = <0x0>;

		qcom,csiphy-sd-index = <0>;

		qcom,csid-sd-index = <0>;

		qcom,mount-angle = <90>;

		qcom,mount-angle = <270>;

		qcom,led-flash-src = <&led_flash0>;

		qcom,actuator-src = <&actuator0>;

		qcom,ois-src = <&ois0>;

		qcom,eeprom-src = <&eeprom0>;

		cam_vio-supply = <&pm660_l11>;

		cam_vana-supply = <&cam_avdd_gpio_regulator>;

		cam_vdig-supply = <&cam_dvdd_gpio_regulator>;

		cam_vdig-supply = <&pm660_s5>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <1780000 0 0>;

		qcom,cam-vreg-max-voltage = <1950000 0 0>;

		qcom,cam-vreg-op-mode = <105000 0 0>;

		qcom,cam-vreg-min-voltage = <1780000 0 1350000>;

		qcom,cam-vreg-max-voltage = <1950000 0 1350000>;

		qcom,cam-vreg-op-mode = <105000 0 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active
@@ -306,12 +302,15 @@ 
		pinctrl-1 = <&cam_sensor_mclk0_suspend

				 &cam_sensor_rear_suspend>;

		gpios = <&tlmm 32 0>,

			<&tlmm 46 0>;

			<&tlmm 46 0>,

			<&pm660l_gpios 4 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-req-tbl-num = <0 1>;

		qcom,gpio-req-tbl-flags = <1 0>;

		qcom,gpio-vdig = <2>;

		qcom,gpio-req-tbl-num = <0 1 1>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET0";

					"CAM_RESET0",

					"CAM_VDIG";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;
@@ -328,16 +327,16 @@ 
		reg = <0x1>;

		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <1>;

		qcom,mount-angle = <90>;

		qcom,mount-angle = <270>;

		qcom,actuator-src = <&actuator1>;

		qcom,eeprom-src = <&eeprom1>;

		cam_vio-supply = <&pm660_l11>;

		cam_vana-supply = <&cam_avdd_gpio_regulator>;

		cam_vdig-supply = <&cam_dvdd_gpio_regulator>;

		cam_vdig-supply = <&pm660_s5>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig";

		qcom,cam-vreg-min-voltage = <1780000 0 0>;

		qcom,cam-vreg-max-voltage = <1950000 0 0>;

		qcom,cam-vreg-op-mode = <105000 0 0>;

		qcom,cam-vreg-min-voltage = <1780000 0 1350000>;

		qcom,cam-vreg-max-voltage = <1950000 0 1350000>;

		qcom,cam-vreg-op-mode = <105000 0 105000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active
@@ -345,15 +344,18 @@ 
		pinctrl-1 = <&cam_sensor_mclk2_suspend

				 &cam_sensor_rear2_suspend>;

		gpios = <&tlmm 34 0>,

			<&tlmm 48 0>;

			<&tlmm 48 0>,

			<&pm660l_gpios 4 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-req-tbl-num = <0 1>;

		qcom,gpio-req-tbl-flags = <1 0>;

		qcom,gpio-vdig = <2>;

		qcom,gpio-req-tbl-num = <0 1 1>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

					  "CAM_RESET1";

					  "CAM_RESET1",

					  "CAM_VDIG";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_mmss MCLK2_CLK_SRC>,

			<&clock_mmss MMSS_CAMSS_MCLK2_CLK>;