powerpc/p3060qds: Add support for P3060QDS board (96cc017c) · Commits · e / devices / android_kernel_sony_msm8994_rework

arch/powerpc/boot/dts/p3060qds.dts

0 → 100644

+238 −0

Original line number	Diff line number	Diff line
		/*
		* P3060QDS Device Tree Source
		*
		* Copyright 2011 Freescale Semiconductor Inc.
		*
		* Redistribution and use in source and binary forms, with or without
		* modification, are permitted provided that the following conditions are met:
		* * Redistributions of source code must retain the above copyright
		* notice, this list of conditions and the following disclaimer.
		* * Redistributions in binary form must reproduce the above copyright
		* notice, this list of conditions and the following disclaimer in the
		* documentation and/or other materials provided with the distribution.
		* * Neither the name of Freescale Semiconductor nor the
		* names of its contributors may be used to endorse or promote products
		* derived from this software without specific prior written permission.
		*
		*
		* ALTERNATIVELY, this software may be distributed under the terms of the
		* GNU General Public License ("GPL") as published by the Free Software
		* Foundation, either version 2 of that License or (at your option) any
		* later version.
		*
		* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
		* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
		* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
		* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
		* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
		* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
		* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
		* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
		* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
		* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
		*/

		/include/ "p3060si.dtsi"

		/ {
		model = "fsl,P3060QDS";
		compatible = "fsl,P3060QDS";
		#address-cells = <2>;
		#size-cells = <2>;
		interrupt-parent = <&mpic>;

		memory {
		device_type = "memory";
		};

		dcsr: dcsr@f00000000 {
		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
		};

		soc: soc@ffe000000 {
		spi@110000 {
		flash@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "spansion,s25sl12801";
		reg = <0>;
		spi-max-frequency = <40000000>; /* input clock */
		partition@u-boot {
		label = "u-boot";
		reg = <0x00000000 0x00100000>;
		read-only;
		};
		partition@kernel {
		label = "kernel";
		reg = <0x00100000 0x00500000>;
		read-only;
		};
		partition@dtb {
		label = "dtb";
		reg = <0x00600000 0x00100000>;
		read-only;
		};
		partition@fs {
		label = "file system";
		reg = <0x00700000 0x00900000>;
		};
		};
		flash@1 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "spansion,en25q32b";
		reg = <1>;
		spi-max-frequency = <40000000>; /* input clock */
		partition@spi1 {
		label = "spi1";
		reg = <0x00000000 0x00400000>;
		};
		};
		flash@2 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "atmel,at45db081d";
		reg = <2>;
		spi-max-frequency = <40000000>; /* input clock */
		partition@spi1 {
		label = "spi2";
		reg = <0x00000000 0x00100000>;
		};
		};
		flash@3 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "spansion,sst25wf040";
		reg = <3>;
		spi-max-frequency = <40000000>; /* input clock */
		partition@spi3 {
		label = "spi3";
		reg = <0x00000000 0x00080000>;
		};
		};
		};

		i2c@118000 {
		eeprom@51 {
		compatible = "at24,24c256";
		reg = <0x51>;
		};
		eeprom@53 {
		compatible = "at24,24c256";
		reg = <0x53>;
		};
		rtc@68 {
		compatible = "dallas,ds3232";
		reg = <0x68>;
		interrupts = <0x1 0x1 0 0>;
		};
		};

		usb0: usb@210000 {
		phy_type = "ulpi";
		};

		usb1: usb@211000 {
		dr_mode = "host";
		phy_type = "ulpi";
		};
		};

		rapidio@ffe0c0000 {
		reg = <0xf 0xfe0c0000 0 0x11000>;

		port1 {
		ranges = <0 0 0xc 0x20000000 0 0x10000000>;
		};
		port2 {
		ranges = <0 0 0xc 0x30000000 0 0x10000000>;
		};
		};

		localbus@ffe124000 {
		reg = <0xf 0xfe124000 0 0x1000>;
		ranges = <0 0 0xf 0xe8000000 0x08000000
		2 0 0xf 0xffa00000 0x00040000
		3 0 0xf 0xffdf0000 0x00008000>;

		flash@0,0 {
		compatible = "cfi-flash";
		reg = <0 0 0x08000000>;
		bank-width = <2>;
		device-width = <2>;
		};

		nand@2,0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "fsl,elbc-fcm-nand";
		reg = <0x2 0x0 0x40000>;

		partition@0 {
		label = "NAND U-Boot Image";
		reg = <0x0 0x02000000>;
		read-only;
		};

		partition@2000000 {
		label = "NAND Root File System";
		reg = <0x02000000 0x10000000>;
		};

		partition@12000000 {
		label = "NAND Compressed RFS Image";
		reg = <0x12000000 0x08000000>;
		};

		partition@1a000000 {
		label = "NAND Linux Kernel Image";
		reg = <0x1a000000 0x04000000>;
		};

		partition@1e000000 {
		label = "NAND DTB Image";
		reg = <0x1e000000 0x01000000>;
		};

		partition@1f000000 {
		label = "NAND Writable User area";
		reg = <0x1f000000 0x21000000>;
		};
		};

		board-control@3,0 {
		compatible = "fsl,p3060qds-fpga", "fsl,fpga-qixis";
		reg = <3 0 0x100>;
		};
		};

		pci0: pcie@ffe200000 {
		reg = <0xf 0xfe200000 0 0x1000>;
		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
		0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
		pcie@0 {
		ranges = <0x02000000 0 0xe0000000
		0x02000000 0 0xe0000000
		0 0x20000000

		0x01000000 0 0x00000000
		0x01000000 0 0x00000000
		0 0x00010000>;
		};
		};

		pci1: pcie@ffe201000 {
		reg = <0xf 0xfe201000 0 0x1000>;
		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
		0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
		pcie@0 {
		ranges = <0x02000000 0 0xe0000000
		0x02000000 0 0xe0000000
		0 0x20000000

		0x01000000 0 0x00000000
		0x01000000 0 0x00000000
		0 0x00010000>;
		};
		};
		};

arch/powerpc/boot/dts/p3060si.dtsi

0 → 100644

+719 −0

Original line number	Diff line number	Diff line
		/*
		* P3060 Silicon Device Tree Source
		*
		* Copyright 2011 Freescale Semiconductor Inc.
		*
		* Redistribution and use in source and binary forms, with or without
		* modification, are permitted provided that the following conditions are met:
		* * Redistributions of source code must retain the above copyright
		* notice, this list of conditions and the following disclaimer.
		* * Redistributions in binary form must reproduce the above copyright
		* notice, this list of conditions and the following disclaimer in the
		* documentation and/or other materials provided with the distribution.
		* * Neither the name of Freescale Semiconductor nor the
		* names of its contributors may be used to endorse or promote products
		* derived from this software without specific prior written permission.
		*
		*
		* ALTERNATIVELY, this software may be distributed under the terms of the
		* GNU General Public License ("GPL") as published by the Free Software
		* Foundation, either version 2 of that License or (at your option) any
		* later version.
		*
		* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
		* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
		* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
		* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
		* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
		* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
		* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
		* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
		* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
		* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
		*/

		/dts-v1/;

		/ {
		compatible = "fsl,P3060";
		#address-cells = <2>;
		#size-cells = <2>;
		interrupt-parent = <&mpic>;

		aliases {
		ccsr = &soc;
		dcsr = &dcsr;

		serial0 = &serial0;
		serial1 = &serial1;
		serial2 = &serial2;
		serial3 = &serial3;
		pci0 = &pci0;
		pci1 = &pci1;
		usb0 = &usb0;
		usb1 = &usb1;
		dma0 = &dma0;
		dma1 = &dma1;
		msi0 = &msi0;
		msi1 = &msi1;
		msi2 = &msi2;

		crypto = &crypto;
		sec_jr0 = &sec_jr0;
		sec_jr1 = &sec_jr1;
		sec_jr2 = &sec_jr2;
		sec_jr3 = &sec_jr3;
		rtic_a = &rtic_a;
		rtic_b = &rtic_b;
		rtic_c = &rtic_c;
		rtic_d = &rtic_d;
		sec_mon = &sec_mon;
		};

		cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu0: PowerPC,e500mc@0 {
		device_type = "cpu";
		reg = <0>;
		next-level-cache = <&L2_0>;
		L2_0: l2-cache {
		next-level-cache = <&cpc>;
		};
		};
		cpu1: PowerPC,e500mc@1 {
		device_type = "cpu";
		reg = <1>;
		next-level-cache = <&L2_1>;
		L2_1: l2-cache {
		next-level-cache = <&cpc>;
		};
		};
		cpu4: PowerPC,e500mc@4 {
		device_type = "cpu";
		reg = <4>;
		next-level-cache = <&L2_4>;
		L2_4: l2-cache {
		next-level-cache = <&cpc>;
		};
		};
		cpu5: PowerPC,e500mc@5 {
		device_type = "cpu";
		reg = <5>;
		next-level-cache = <&L2_5>;
		L2_5: l2-cache {
		next-level-cache = <&cpc>;
		};
		};
		cpu6: PowerPC,e500mc@6 {
		device_type = "cpu";
		reg = <6>;
		next-level-cache = <&L2_6>;
		L2_6: l2-cache {
		next-level-cache = <&cpc>;
		};
		};
		cpu7: PowerPC,e500mc@7 {
		device_type = "cpu";
		reg = <7>;
		next-level-cache = <&L2_7>;
		L2_7: l2-cache {
		next-level-cache = <&cpc>;
		};
		};
		};

		dcsr: dcsr@f00000000 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "fsl,dcsr", "simple-bus";

		dcsr-epu@0 {
		compatible = "fsl,dcsr-epu";
		interrupts = <52 2 0 0
		84 2 0 0
		85 2 0 0>;
		interrupt-parent = <&mpic>;
		reg = <0x0 0x1000>;
		};
		dcsr-npc {
		compatible = "fsl,dcsr-npc";
		reg = <0x1000 0x1000 0x1000000 0x8000>;
		};
		dcsr-nxc@2000 {
		compatible = "fsl,dcsr-nxc";
		reg = <0x2000 0x1000>;
		};
		dcsr-corenet {
		compatible = "fsl,dcsr-corenet";
		reg = <0x8000 0x1000 0xB0000 0x1000>;
		};
		dcsr-dpaa@9000 {
		compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa";
		reg = <0x9000 0x1000>;
		};
		dcsr-ocn@11000 {
		compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn";
		reg = <0x11000 0x1000>;
		};
		dcsr-ddr@12000 {
		compatible = "fsl,dcsr-ddr";
		dev-handle = <&ddr>;
		reg = <0x12000 0x1000>;
		};
		dcsr-nal@18000 {
		compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal";
		reg = <0x18000 0x1000>;
		};
		dcsr-rcpm@22000 {
		compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm";
		reg = <0x22000 0x1000>;
		};
		dcsr-cpu-sb-proxy@40000 {
		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
		cpu-handle = <&cpu0>;
		reg = <0x40000 0x1000>;
		};
		dcsr-cpu-sb-proxy@41000 {
		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
		cpu-handle = <&cpu1>;
		reg = <0x41000 0x1000>;
		};
		dcsr-cpu-sb-proxy@44000 {
		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
		cpu-handle = <&cpu4>;
		reg = <0x44000 0x1000>;
		};
		dcsr-cpu-sb-proxy@45000 {
		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
		cpu-handle = <&cpu5>;
		reg = <0x45000 0x1000>;
		};
		dcsr-cpu-sb-proxy@46000 {
		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
		cpu-handle = <&cpu6>;
		reg = <0x46000 0x1000>;
		};
		dcsr-cpu-sb-proxy@47000 {
		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
		cpu-handle = <&cpu7>;
		reg = <0x47000 0x1000>;
		};
		};

		soc: soc@ffe000000 {
		#address-cells = <1>;
		#size-cells = <1>;
		device_type = "soc";
		compatible = "simple-bus";
		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
		reg = <0xf 0xfe000000 0 0x00001000>;

		soc-sram-error {
		compatible = "fsl,soc-sram-error";
		interrupts = <16 2 1 29>;
		};

		corenet-law@0 {
		compatible = "fsl,corenet-law";
		reg = <0x0 0x1000>;
		fsl,num-laws = <32>;
		};

		ddr: memory-controller@8000 {
		compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
		reg = <0x8000 0x1000>;
		interrupts = <16 2 1 23>;
		};

		cpc: l3-cache-controller@10000 {
		compatible = "fsl,p3060-l3-cache-controller", "cache";
		reg = <0x10000 0x1000
		0x11000 0x1000>;
		interrupts = <16 2 1 27>;
		};

		corenet-cf@18000 {
		compatible = "fsl,corenet-cf";
		reg = <0x18000 0x1000>;
		interrupts = <16 2 1 31>;
		fsl,ccf-num-csdids = <32>;
		fsl,ccf-num-snoopids = <32>;
		};

		iommu@20000 {
		compatible = "fsl,pamu-v1.0", "fsl,pamu";
		reg = <0x20000 0x5000>;
		interrupts = <
		24 2 0 0
		16 2 1 30>;
		};

		mpic: pic@40000 {
		clock-frequency = <0>;
		interrupt-controller;
		#address-cells = <0>;
		#interrupt-cells = <4>;
		reg = <0x40000 0x40000>;
		compatible = "fsl,mpic", "chrp,open-pic";
		device_type = "open-pic";
		};

		msi0: msi@41600 {
		compatible = "fsl,mpic-msi";
		reg = <0x41600 0x200>;
		msi-available-ranges = <0 0x100>;
		interrupts = <
		0xe0 0 0 0
		0xe1 0 0 0
		0xe2 0 0 0
		0xe3 0 0 0
		0xe4 0 0 0
		0xe5 0 0 0
		0xe6 0 0 0
		0xe7 0 0 0>;
		};

		msi1: msi@41800 {
		compatible = "fsl,mpic-msi";
		reg = <0x41800 0x200>;
		msi-available-ranges = <0 0x100>;
		interrupts = <
		0xe8 0 0 0
		0xe9 0 0 0
		0xea 0 0 0
		0xeb 0 0 0
		0xec 0 0 0
		0xed 0 0 0
		0xee 0 0 0
		0xef 0 0 0>;
		};

		msi2: msi@41a00 {
		compatible = "fsl,mpic-msi";
		reg = <0x41a00 0x200>;
		msi-available-ranges = <0 0x100>;
		interrupts = <
		0xf0 0 0 0
		0xf1 0 0 0
		0xf2 0 0 0
		0xf3 0 0 0
		0xf4 0 0 0
		0xf5 0 0 0
		0xf6 0 0 0
		0xf7 0 0 0>;
		};

		rmu: rmu@d3000 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "fsl,srio-rmu";
		reg = <0xd3000 0x500>;
		ranges = <0x0 0xd3000 0x500>;

		message-unit@0 {
		compatible = "fsl,srio-msg-unit";
		reg = <0x0 0x100>;
		interrupts = <
		60 2 0 0 /* msg1_tx_irq */
		61 2 0 0>;/* msg1_rx_irq */
		};
		message-unit@100 {
		compatible = "fsl,srio-msg-unit";
		reg = <0x100 0x100>;
		interrupts = <
		62 2 0 0 /* msg2_tx_irq */
		63 2 0 0>;/* msg2_rx_irq */
		};
		doorbell-unit@400 {
		compatible = "fsl,srio-dbell-unit";
		reg = <0x400 0x80>;
		interrupts = <
		56 2 0 0 /* bell_outb_irq */
		57 2 0 0>;/* bell_inb_irq */
		};
		port-write-unit@4e0 {
		compatible = "fsl,srio-port-write-unit";
		reg = <0x4e0 0x20>;
		interrupts = <16 2 1 11>;
		};
		};

		guts: global-utilities@e0000 {
		compatible = "fsl,qoriq-device-config-1.0";
		reg = <0xe0000 0xe00>;
		fsl,has-rstcr;
		#sleep-cells = <1>;
		fsl,liodn-bits = <12>;
		};

		pins: global-utilities@e0e00 {
		compatible = "fsl,qoriq-pin-control-1.0";
		reg = <0xe0e00 0x200>;
		#sleep-cells = <2>;
		};

		clockgen: global-utilities@e1000 {
		compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0";
		reg = <0xe1000 0x1000>;
		clock-frequency = <0>;
		};

		rcpm: global-utilities@e2000 {
		compatible = "fsl,qoriq-rcpm-1.0";
		reg = <0xe2000 0x1000>;
		#sleep-cells = <1>;
		};

		sfp: sfp@e8000 {
		compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0";
		reg = <0xe8000 0x1000>;
		};

		serdes: serdes@ea000 {
		compatible = "fsl,p3060-serdes";
		reg = <0xea000 0x1000>;
		};

		dma0: dma@100300 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
		reg = <0x100300 0x4>;
		ranges = <0x0 0x100100 0x200>;
		cell-index = <0>;
		dma-channel@0 {
		compatible = "fsl,p3060-dma-channel",
		"fsl,eloplus-dma-channel";
		reg = <0x0 0x80>;
		cell-index = <0>;
		interrupts = <28 2 0 0>;
		};
		dma-channel@80 {
		compatible = "fsl,p3060-dma-channel",
		"fsl,eloplus-dma-channel";
		reg = <0x80 0x80>;
		cell-index = <1>;
		interrupts = <29 2 0 0>;
		};
		dma-channel@100 {
		compatible = "fsl,p3060-dma-channel",
		"fsl,eloplus-dma-channel";
		reg = <0x100 0x80>;
		cell-index = <2>;
		interrupts = <30 2 0 0>;
		};
		dma-channel@180 {
		compatible = "fsl,p3060-dma-channel",
		"fsl,eloplus-dma-channel";
		reg = <0x180 0x80>;
		cell-index = <3>;
		interrupts = <31 2 0 0>;
		};
		};

		dma1: dma@101300 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
		reg = <0x101300 0x4>;
		ranges = <0x0 0x101100 0x200>;
		cell-index = <1>;
		dma-channel@0 {
		compatible = "fsl,p3060-dma-channel",
		"fsl,eloplus-dma-channel";
		reg = <0x0 0x80>;
		cell-index = <0>;
		interrupts = <32 2 0 0>;
		};
		dma-channel@80 {
		compatible = "fsl,p3060-dma-channel",
		"fsl,eloplus-dma-channel";
		reg = <0x80 0x80>;
		cell-index = <1>;
		interrupts = <33 2 0 0>;
		};
		dma-channel@100 {
		compatible = "fsl,p3060-dma-channel",
		"fsl,eloplus-dma-channel";
		reg = <0x100 0x80>;
		cell-index = <2>;
		interrupts = <34 2 0 0>;
		};
		dma-channel@180 {
		compatible = "fsl,p3060-dma-channel",
		"fsl,eloplus-dma-channel";
		reg = <0x180 0x80>;
		cell-index = <3>;
		interrupts = <35 2 0 0>;
		};
		};

		spi@110000 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "fsl,p3060-espi", "fsl,mpc8536-espi";
		reg = <0x110000 0x1000>;
		interrupts = <53 0x2 0 0>;
		fsl,espi-num-chipselects = <4>;
		};

		i2c@118000 {
		#address-cells = <1>;
		#size-cells = <0>;
		cell-index = <0>;
		compatible = "fsl-i2c";
		reg = <0x118000 0x100>;
		interrupts = <38 2 0 0>;
		dfsrr;
		};

		i2c@118100 {
		#address-cells = <1>;
		#size-cells = <0>;
		cell-index = <1>;
		compatible = "fsl-i2c";
		reg = <0x118100 0x100>;
		interrupts = <38 2 0 0>;
		dfsrr;
		};

		i2c@119000 {
		#address-cells = <1>;
		#size-cells = <0>;
		cell-index = <2>;
		compatible = "fsl-i2c";
		reg = <0x119000 0x100>;
		interrupts = <39 2 0 0>;
		dfsrr;
		};

		i2c@119100 {
		#address-cells = <1>;
		#size-cells = <0>;
		cell-index = <3>;
		compatible = "fsl-i2c";
		reg = <0x119100 0x100>;
		interrupts = <39 2 0 0>;
		dfsrr;
		};

		serial0: serial@11c500 {
		cell-index = <0>;
		device_type = "serial";
		compatible = "ns16550";
		reg = <0x11c500 0x100>;
		clock-frequency = <0>;
		interrupts = <36 2 0 0>;
		};

		serial1: serial@11c600 {
		cell-index = <1>;
		device_type = "serial";
		compatible = "ns16550";
		reg = <0x11c600 0x100>;
		clock-frequency = <0>;
		interrupts = <36 2 0 0>;
		};

		serial2: serial@11d500 {
		cell-index = <2>;
		device_type = "serial";
		compatible = "ns16550";
		reg = <0x11d500 0x100>;
		clock-frequency = <0>;
		interrupts = <37 2 0 0>;
		};

		serial3: serial@11d600 {
		cell-index = <3>;
		device_type = "serial";
		compatible = "ns16550";
		reg = <0x11d600 0x100>;
		clock-frequency = <0>;
		interrupts = <37 2 0 0>;
		};

		gpio0: gpio@130000 {
		compatible = "fsl,p3060-gpio", "fsl,qoriq-gpio";
		reg = <0x130000 0x1000>;
		interrupts = <55 2 0 0>;
		#gpio-cells = <2>;
		gpio-controller;
		};

		usb0: usb@210000 {
		compatible = "fsl,p3060-usb2-mph",
		"fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
		reg = <0x210000 0x1000>;
		#address-cells = <1>;
		#size-cells = <0>;
		interrupts = <44 0x2 0 0>;
		};

		usb1: usb@211000 {
		compatible = "fsl,p3060-usb2-dr",
		"fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
		reg = <0x211000 0x1000>;
		#address-cells = <1>;
		#size-cells = <0>;
		interrupts = <45 0x2 0 0>;
		};

		crypto: crypto@300000 {
		compatible = "fsl,sec-v4.1", "fsl,sec-v4.0";
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0x300000 0x10000>;
		ranges = <0 0x300000 0x10000>;
		interrupt-parent = <&mpic>;
		interrupts = <92 2 0 0>;

		sec_jr0: jr@1000 {
		compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
		reg = <0x1000 0x1000>;
		interrupt-parent = <&mpic>;
		interrupts = <88 2 0 0>;
		};

		sec_jr1: jr@2000 {
		compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
		reg = <0x2000 0x1000>;
		interrupt-parent = <&mpic>;
		interrupts = <89 2 0 0>;
		};

		sec_jr2: jr@3000 {
		compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
		reg = <0x3000 0x1000>;
		interrupt-parent = <&mpic>;
		interrupts = <90 2 0 0>;
		};

		sec_jr3: jr@4000 {
		compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
		reg = <0x4000 0x1000>;
		interrupt-parent = <&mpic>;
		interrupts = <91 2 0 0>;
		};

		rtic@6000 {
		compatible = "fsl,sec-v4.1-rtic", "fsl,sec-v4.0-rtic";
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0x6000 0x100>;
		ranges = <0x0 0x6100 0xe00>;

		rtic_a: rtic-a@0 {
		compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
		reg = <0x00 0x20 0x100 0x80>;
		};

		rtic_b: rtic-b@20 {
		compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
		reg = <0x20 0x20 0x200 0x80>;
		};

		rtic_c: rtic-c@40 {
		compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
		reg = <0x40 0x20 0x300 0x80>;
		};

		rtic_d: rtic-d@60 {
		compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
		reg = <0x60 0x20 0x500 0x80>;
		};
		};
		};

		sec_mon: sec_mon@314000 {
		compatible = "fsl,sec-v4.1-mon", "fsl,sec-v4.0-mon";
		reg = <0x314000 0x1000>;
		interrupt-parent = <&mpic>;
		interrupts = <93 2 0 0>;
		};
		};

		rapidio@ffe0c0000 {
		compatible = "fsl,srio";
		interrupts = <16 2 1 11>;
		#address-cells = <2>;
		#size-cells = <2>;
		fsl,srio-rmu-handle = <&rmu>;
		ranges;

		port1 {
		#address-cells = <2>;
		#size-cells = <2>;
		cell-index = <1>;
		};

		port2 {
		#address-cells = <2>;
		#size-cells = <2>;
		cell-index = <2>;
		};
		};

		localbus@ffe124000 {
		compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus";
		interrupts = <25 2 0 0>;
		#address-cells = <2>;
		#size-cells = <1>;
		};

		pci0: pcie@ffe200000 {
		compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
		device_type = "pci";
		#size-cells = <2>;
		#address-cells = <3>;
		bus-range = <0x0 0xff>;
		clock-frequency = <33333333>;
		fsl,msi = <&msi0>;
		interrupts = <16 2 1 15>;
		pcie@0 {
		reg = <0 0 0 0 0>;
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";
		interrupts = <16 2 1 15>;
		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <
		/* IDSEL 0x0 */
		0000 0 0 1 &mpic 40 1 0 0
		0000 0 0 2 &mpic 1 1 0 0
		0000 0 0 3 &mpic 2 1 0 0
		0000 0 0 4 &mpic 3 1 0 0
		>;
		};
		};

		pci1: pcie@ffe201000 {
		compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
		device_type = "pci";
		#size-cells = <2>;
		#address-cells = <3>;
		bus-range = <0 0xff>;
		clock-frequency = <33333333>;
		fsl,msi = <&msi1>;
		interrupts = <16 2 1 14>;
		pcie@0 {
		reg = <0 0 0 0 0>;
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";
		interrupts = <16 2 1 14>;
		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <
		/* IDSEL 0x0 */
		0000 0 0 1 &mpic 41 1 0 0
		0000 0 0 2 &mpic 5 1 0 0
		0000 0 0 3 &mpic 6 1 0 0
		0000 0 0 4 &mpic 7 1 0 0
		>;
		};
		};
		};

arch/powerpc/configs/corenet32_smp_defconfig

+1 −0

Original line number	Diff line number	Diff line
		@@ -23,6 +23,7 @@ CONFIG_MODVERSIONS=y
		# CONFIG_BLK_DEV_BSG is not set
		CONFIG_P2041_RDB=y
		CONFIG_P3041_DS=y
		CONFIG_P3060_QDS=y
		CONFIG_P4080_DS=y
		CONFIG_P5020_DS=y
		CONFIG_HIGHMEM=y

arch/powerpc/platforms/85xx/Kconfig

+12 −0

Original line number	Diff line number	Diff line
		@@ -197,6 +197,18 @@ config P3041_DS
		help
		This option enables support for the P3041 DS board

		config P3060_QDS
		bool "Freescale P3060 QDS"
		select DEFAULT_UIMAGE
		select PPC_E500MC
		select PHYS_64BIT
		select SWIOTLB
		select MPC8xxx_GPIO
		select HAS_RAPIDIO
		select PPC_EPAPR_HV_PIC
		help
		This option enables support for the P3060 QDS board

		config P4080_DS
		bool "Freescale P4080 DS"
		select DEFAULT_UIMAGE

arch/powerpc/platforms/85xx/Makefile

+1 −0

Original line number	Diff line number	Diff line
		@@ -15,6 +15,7 @@ obj-$(CONFIG_P1022_DS) += p1022_ds.o
		obj-$(CONFIG_P1023_RDS) += p1023_rds.o
		obj-$(CONFIG_P2041_RDB) += p2041_rdb.o corenet_ds.o
		obj-$(CONFIG_P3041_DS) += p3041_ds.o corenet_ds.o
		obj-$(CONFIG_P3060_QDS) += p3060_qds.o corenet_ds.o
		obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o
		obj-$(CONFIG_P5020_DS) += p5020_ds.o corenet_ds.o
		obj-$(CONFIG_STX_GP3) += stx_gp3.o