Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 4a4c9da0 authored by Yaniv Gardi's avatar Yaniv Gardi Committed by Subhash Jadavani
Browse files

scsi: ufs-msm: change default working mode in HS to rate A 



So far, we used to work in the maximum HS (High Speed) rate available
by the UFS device (and supported by the controller) which is rate B.
This change changes the default working rate from rate B to rate A,
in order to gain more stability.

Change-Id: I797485b9699c5dab2a294b524f27c8e327b1e62d
Signed-off-by: default avatarYaniv Gardi <ygardi@codeaurora.org>
parent 22f171b1

drivers/scsi/ufs/ufs-msm.c

+1 −1
Original line number Original line Diff line number Diff line
@@ -41,7 +41,7 @@ 
#define UFS_MSM_LIMIT_TX_PWR_PWM	SLOW_MODE

#define UFS_MSM_LIMIT_TX_PWR_PWM	SLOW_MODE

#define UFS_MSM_LIMIT_RX_PWR_HS	FAST_MODE

#define UFS_MSM_LIMIT_RX_PWR_HS	FAST_MODE

#define UFS_MSM_LIMIT_TX_PWR_HS	FAST_MODE

#define UFS_MSM_LIMIT_TX_PWR_HS	FAST_MODE

#define UFS_MSM_LIMIT_HS_RATE		PA_HS_MODE_B

#define UFS_MSM_LIMIT_HS_RATE		PA_HS_MODE_A

#define UFS_MSM_LIMIT_DESIRED_MODE	FAST

#define UFS_MSM_LIMIT_DESIRED_MODE	FAST





static struct msm_ufs_phy_calibration phy_cal_table_ctrl_1_1_0_rate_A[] = {

static struct msm_ufs_phy_calibration phy_cal_table_ctrl_1_1_0_rate_A[] = {