Merge "ARM: dts: msm: add mdss support in DT" (da41453d) · Commits · e / devices / android_kernel_sony_msm8994

arch/arm/boot/dts/qcom/msm8939-mdss.dtsi

0 → 100644

+192 −0

Original line number	Diff line number	Diff line
		/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		* only version 2 as published by the Free Software Foundation.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*/

		&soc {
		mdss_mdp: qcom,mdss_mdp@1a00000 {
		compatible = "qcom,mdss_mdp";
		reg = <0x1a00000 0x90000>,
		<0x1ac8000 0x3000>;
		reg-names = "mdp_phys", "vbif_phys";
		interrupts = <0 72 0>;
		vdd-supply = <&gdsc_mdss>;

		/* Bus Scale Settings */
		qcom,msm-bus,name = "mdss_mdp";
		qcom,msm-bus,num-cases = <3>;
		qcom,msm-bus,num-paths = <1>;
		qcom,msm-bus,vectors-KBps =
		<22 512 0 0>,
		<22 512 0 6400000>,
		<22 512 0 6400000>;

		/* Fudge factors */
		qcom,mdss-ab-factor = <1 1>; /* 1 times */
		qcom,mdss-ib-factor = <2 1>; /* 2 times */
		qcom,mdss-clk-factor = <105 100>; /* 1.05 times */
		qcom,max-bandwidth-low-kbps = <1100000>;
		qcom,max-bandwidth-high-kbps = <1100000>;

		/* VBIF QoS remapper settings*/
		qcom,mdss-vbif-qos-rt-setting = <2 2 2 2>;
		qcom,mdss-vbif-qos-nrt-setting = <1 1 1 1>;
		qcom,max-mixer-width = <2048>;
		qcom,mdss-mdp-reg-offset = <0x00001000>;
		qcom,max-clk-rate = <320000000>;
		qcom,mdss-pipe-vig-off = <0x00005000>;
		qcom,mdss-pipe-rgb-off = <0x00015000 0x00017000>;
		qcom,mdss-pipe-dma-off = <0x00025000>;
		qcom,mdss-pipe-vig-fetch-id = <1>;
		qcom,mdss-pipe-rgb-fetch-id = <7 8>;
		qcom,mdss-pipe-dma-fetch-id = <4>;

		qcom,mdss-pipe-vig-xin-id = <0>;
		qcom,mdss-pipe-rgb-xin-id = <1 5>;
		qcom,mdss-pipe-dma-xin-id = <2>;
		qcom,mdss-pipe-vig-clk-ctrl-offsets = <0x2ac 0 0>;
		qcom,mdss-pipe-rgb-clk-ctrl-offsets = <0x2ac 4 8>,
		<0x2b4 4 8>;
		qcom,mdss-pipe-dma-clk-ctrl-offsets = <0x2ac 8 12>;

		qcom,mdss-smp-data = <8 10240>;

		qcom,mdss-ctl-off = <0x00002000 0x00002200 0x00002400>;
		qcom,mdss-mixer-intf-off = <0x00045000>;
		qcom,mdss-mixer-wb-off = <0x00048000>;
		qcom,mdss-dspp-off = <0x00055000>;
		qcom,mdss-pingpong-off = <0x00071000>;
		qcom,mdss-wb-off = <0x00065000 0x00065800 0x00066000>;
		qcom,mdss-intf-off = <0x00000000 0x0006b800>;
		qcom,mdss-rot-block-size = <64>;
		qcom,mdss-wfd-mode = "dedicated";
		qcom,mdss-has-non-scalar-rgb;
		qcom,mdss-has-decimation;

		vdd-cx-supply = <&pm8916_s1_corner>;
		clocks = <&clock_gcc clk_gcc_mdss_ahb_clk>,
		<&clock_gcc clk_gcc_mdss_axi_clk>,
		<&clock_gcc clk_mdp_clk_src>,
		<&clock_gcc clk_gcc_mdss_mdp_clk>,
		<&clock_gcc clk_gcc_mdss_vsync_clk>;
		clock-names = "iface_clk", "bus_clk", "core_clk_src",
		"core_clk", "vsync_clk";
		qcom,mdp-settings = <0x000011e4 0x00000000>,
		<0x00065048 0x00000008>,
		<0x00065848 0x00000008>,
		<0x00066048 0x00000008>;

		/* buffer parameters to calculate prefill bandwidth */
		qcom,mdss-prefill-outstanding-buffer-bytes = <2048>;
		qcom,mdss-prefill-y-buffer-bytes = <0>;
		qcom,mdss-prefill-scaler-buffer-lines-bilinear = <2>;
		qcom,mdss-prefill-scaler-buffer-lines-caf = <4>;
		qcom,mdss-prefill-post-scaler-buffer-pixels = <2560>;
		qcom,mdss-prefill-pingpong-buffer-pixels = <6400>;
		qcom,mdss-prefill-fbc-lines = <2>;

		mdss_fb0: qcom,mdss_fb_primary {
		cell-index = <0>;
		compatible = "qcom,mdss-fb";
		};

		mdss_fb1: qcom,mdss_fb_wfd {
		cell-index = <1>;
		compatible = "qcom,mdss-fb";
		};
		};

		mdss_dsi0: qcom,mdss_dsi@1a98000 {
		compatible = "qcom,mdss-dsi-ctrl";
		label = "MDSS DSI CTRL->0";
		cell-index = <0>;
		reg = <0x1a98000 0x25c>,
		<0x1a98500 0x2b0>;
		reg-names = "dsi_ctrl", "dsi_phy";
		qcom,mdss-fb-map = <&mdss_fb0>;
		qcom,mdss-mdp = <&mdss_mdp>;
		gdsc-supply = <&gdsc_mdss>;
		vdda-supply = <&pm8916_l2>;
		vdd-supply = <&pm8916_l17>;
		vddio-supply = <&pm8916_l6>;
		clocks = <&clock_gcc clk_gcc_mdss_mdp_clk>,
		<&clock_gcc clk_gcc_mdss_ahb_clk>,
		<&clock_gcc clk_gcc_mdss_axi_clk>,
		<&clock_gcc clk_gcc_mdss_esc0_clk>;
		clock-names = "mdp_core_clk", "iface_clk", "bus_clk",
		"core_clk";
		qcom,platform-strength-ctrl = [ff 06];
		qcom,platform-bist-ctrl = [00 00 b1 ff 00 00];
		qcom,platform-regulator-settings = [07 09 03 00 20 00 01];
		qcom,platform-lane-config = [00 00 00 00 00 00 00 01 97
		00 00 00 00 05 00 00 01 97
		00 00 00 00 0a 00 00 01 97
		00 00 00 00 0f 00 00 01 97
		00 c0 00 00 00 00 00 01 bb];

		qcom,core-supply-entries {
		#address-cells = <1>;
		#size-cells = <0>;
		qcom,core-supply-entry@0 {
		reg = <0>;
		qcom,supply-name = "gdsc";
		qcom,supply-min-voltage = <0>;
		qcom,supply-max-voltage = <0>;
		qcom,supply-enable-load = <0>;
		qcom,supply-disable-load = <0>;
		};
		};

		qcom,ctrl-supply-entries {
		#address-cells = <1>;
		#size-cells = <0>;
		qcom,ctrl-supply-entry@0 {
		reg = <0>;
		qcom,supply-name = "vdda";
		qcom,supply-min-voltage = <1200000>;
		qcom,supply-max-voltage = <1200000>;
		qcom,supply-enable-load = <100000>;
		qcom,supply-disable-load = <100>;
		qcom,supply-post-on-sleep = <20>;
		};
		};

		qcom,panel-supply-entries {
		#address-cells = <1>;
		#size-cells = <0>;
		qcom,panel-supply-entry@0 {
		reg = <0>;
		qcom,supply-name = "vdd";
		qcom,supply-min-voltage = <2850000>;
		qcom,supply-max-voltage = <2850000>;
		qcom,supply-enable-load = <100000>;
		qcom,supply-disable-load = <100>;
		};
		qcom,panel-supply-entry@1 {
		reg = <1>;
		qcom,supply-name = "vddio";
		qcom,supply-min-voltage = <1800000>;
		qcom,supply-max-voltage = <1800000>;
		qcom,supply-enable-load = <100000>;
		qcom,supply-disable-load = <100>;
		};
		};
		};

		qcom,mdss_wb_panel {
		compatible = "qcom,mdss_wb";
		qcom,mdss_pan_res = <1280 720>;
		qcom,mdss_pan_bpp = <24>;
		qcom,mdss-fb-map = <&mdss_fb1>;
		};
		};

		#include "dsi-panel-sim-video.dtsi"

arch/arm/boot/dts/qcom/msm8939-sim.dts

+10 −0

Original line number	Diff line number	Diff line
		@@ -78,6 +78,16 @@
		status = "ok";
		};

		#include "dsi-panel-sim-video.dtsi"

		&mdss_mdp {
		qcom,mdss-pref-prim-intf = "dsi";
		};

		&mdss_dsi0 {
		qcom,dsi-pref-prim-pan = <&dsi_sim_vid>;
		};

		&pm8916_revid {
		status = "disabled";
		};

arch/arm/boot/dts/qcom/msm8939.dtsi

+1 −0

Original line number	Diff line number	Diff line
		@@ -213,6 +213,7 @@
		#include "msm8939-iommu.dtsi"
		#include "msm8939-coresight.dtsi"
		#include "msm8939-bus.dtsi"
		#include "msm8939-mdss.dtsi"

		&soc {
		#address-cells = <1>;