Merge remote-tracking branch 'rmk/devel-stable' into for-3.3/soc

ff000000	ffbfffff	Reserved for future expansion of DMA

				mapping region.

VMALLOC_END	feffffff	Free for platform use, recommended.

				VMALLOC_END must be aligned to a 2MB

				boundary.

VMALLOC_START	VMALLOC_END-1	vmalloc() / ioremap() space.

				Memory returned by vmalloc/ioremap will

				be dynamically placed in this region.

				VMALLOC_START may be based upon the value

				of the high_memory variable.

				Machine specific static mappings are also

				located here through iotable_init().

				VMALLOC_START is based upon the value

				of the high_memory variable, and VMALLOC_END

				is equal to 0xff000000.

PAGE_OFFSET	high_memory-1	Kernel direct-mapped RAM region.

				This maps the platforms RAM, and typically

- interrupts	: Interrupt source of the parent interrupt controller. Only

  present on secondary GICs.

- cpu-offset	: per-cpu offset within the distributor and cpu interface

  regions, used when the GIC doesn't have banked registers. The offset is

  cpu-offset * cpu-nr.

Example:

	intc: interrupt-controller@fff11000 {

* ARM Vectored Interrupt Controller

One or more Vectored Interrupt Controllers (VIC's) can be connected in an ARM

system for interrupt routing.  For multiple controllers they can either be

nested or have the outputs wire-OR'd together.

Required properties:

- compatible : should be one of

	"arm,pl190-vic"

	"arm,pl192-vic"

- interrupt-controller : Identifies the node as an interrupt controller

- #interrupt-cells : The number of cells to define the interrupts.  Must be 1 as

  the VIC has no configuration options for interrupt sources.  The cell is a u32

  and defines the interrupt number.

- reg : The register bank for the VIC.

Optional properties:

- interrupts : Interrupt source for parent controllers if the VIC is nested.

Example:

	vic0: interrupt-controller@60000 {

		compatible = "arm,pl192-vic";

		interrupt-controller;

		#interrupt-cells = <1>;

		reg = <0x60000 0x1000>;

	};

config XIP_KERNEL

	bool "Kernel Execute-In-Place from ROM"

	depends on !ZBOOT_ROM

	depends on !ZBOOT_ROM && !ARM_LPAE

	help

	  Execute-In-Place allows the kernel to run from non-volatile storage

	  directly addressable by the CPU, such as NOR flash. This saves RAM

config KEXEC

	bool "Kexec system call (EXPERIMENTAL)"

	depends on EXPERIMENTAL

	depends on EXPERIMENTAL && (!SMP || HOTPLUG_CPU)

	help

	  kexec is a system call that implements the ability to shutdown your

	  current kernel, and to start another kernel.  It is like a reboot

		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer

		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control

#endif

		mcr	p15, 0, r0, c7, c5, 4	@ ISB

		mcr	p15, 0, r0, c1, c0, 0	@ load control register

		mrc	p15, 0, r0, c1, c0, 0	@ and read it back

		mov	r0, #0