Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit d64f09ab authored by Shimrit Malichi's avatar Shimrit Malichi
Browse files

ARM: dts: msm: camera device tree changes for LiQUID8994 



Add LiQUID device tree for sensor slots, actuators with pinctrl.

Change-Id: Ibf26a77260640f879c0dfb494e2c85e21af5cabc
Signed-off-by: default avatarShimrit Malichi <smalichi@codeaurora.org>
parent 668164c6

arch/arm/boot/dts/qcom/msm8994-camera-sensor-liquid.dtsi

0 → 100644
+153 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2014, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&cci {

	actuator0: qcom,actuator@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

		cam_vaf-supply = <&pm8994_l23>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-type = <0>;

		qcom,cam-vreg-min-voltage = <2800000>;

		qcom,cam-vreg-max-voltage = <2800000>;

		qcom,cam-vreg-op-mode = <100000>;

	};



	actuator1: qcom,actuator@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

		cam_vaf-supply = <&pm8994_l23>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-type = <0>;

		qcom,cam-vreg-min-voltage = <2800000>;

		qcom,cam-vreg-max-voltage = <2800000>;

		qcom,cam-vreg-op-mode = <100000>;

	};



	qcom,camera@0 {

		cell-index = <0>;

		compatible = "qcom,camera";

		reg = <0x0>;

		qcom,csiphy-sd-index = <0>;

		qcom,csid-sd-index = <0>;

		qcom,mount-angle = <0>;

		qcom,actuator-src = <&actuator0>;

		cam_vdig-supply = <&pm8994_l27>;

		cam_vio-supply = <&pm8994_lvs1>;

		cam_vana-supply = <&pm8994_l17>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";

		qcom,cam-vreg-type = <0 1 0>;

		qcom,cam-vreg-min-voltage = <1050000 0 2700000>;

		qcom,cam-vreg-max-voltage = <1050000 0 2700000>;

		qcom,cam-vreg-op-mode = <105000 0 80000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active &cam_sensor_rear_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend &cam_sensor_rear_suspend>;

		gpios = <&msm_gpio 13 0>,

			<&msm_gpio 92 0>,

			<&msm_gpio 91 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

					  "CAM_RESET0",

					  "CAM_STANDBY0";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_mmss clk_mclk0_clk_src>,

				<&clock_mmss clk_camss_mclk0_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};



	qcom,camera@1 {

		cell-index = <1>;

		compatible = "qcom,camera";

		reg = <0x1>;

		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <1>;

		qcom,mount-angle = <90>;

		cam_vio-supply = <&pm8994_lvs1>;

		cam_vana-supply = <&pm8994_l10>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana";

		qcom,cam-vreg-type = <1 0>;

		qcom,cam-vreg-min-voltage = <0 2850000>;

		qcom,cam-vreg-max-voltage = <0 2850000>;

		qcom,cam-vreg-op-mode = <0 80000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_rear2_active>;

		pinctrl-1 = <&cam_sensor_rear2_suspend>;

		gpios = <&msm_gpio 14 0>,

			<&msm_gpio 94 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1>;

		qcom,gpio-req-tbl-flags = <1 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

					  "CAM_RESET1";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_mmss clk_mclk1_clk_src>,

			<&clock_mmss clk_camss_mclk1_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};



	qcom,camera@2 {

		cell-index = <2>;

		compatible = "qcom,camera";

		reg = <0x02>;

		qcom,csiphy-sd-index = <2>;

		qcom,csid-sd-index = <2>;

		qcom,mount-angle = <90>;

		qcom,actuator-src = <&actuator1>;

		cam_vdig-supply = <&pm8994_l3>;

		cam_vio-supply = <&pm8994_lvs1>;

		cam_vana-supply = <&pm8994_l29>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";

		qcom,cam-vreg-type = <0 1 0>;

		qcom,cam-vreg-min-voltage = <1200000 0 2800000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2800000>;

		qcom,cam-vreg-op-mode = <105000 0 80000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active &cam_sensor_front_active>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend &cam_sensor_front_suspend>;

		gpios = <&msm_gpio 15 0>,

			<&msm_gpio 104 0>,

			<&msm_gpio 105 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					  "CAM_RESET2",

					  "CAM_STANDBY2";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_mmss clk_mclk2_clk_src>,

			<&clock_mmss clk_camss_mclk2_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};

};

arch/arm/boot/dts/qcom/msm8994-liquid.dts

+1 −0
Original line number Diff line number Diff line
@@ -16,6 +16,7 @@ 
#include "msm8994.dtsi"

#include "msm8994-pinctrl.dtsi"

#include "msm8994-liquid.dtsi"

#include "msm8994-camera-sensor-liquid.dtsi"



/ {

	model = "Qualcomm Technologies, Inc. MSM8994 LiQUID";